(847) 934-4500

Contact us today:

Tag Archives: Sinamics

New SINAMICS G120XE enclosed drive series for industrial pump, fan and compressor use in harsh environments, heavy-duty positioning

NEMA 1 enclosed drive system is listed to UL508A and offered as wall-mounted or free-standing enclosures

sinamics g120XE
Siemens offers wall-mounted or free-standing versions of its new SINAMICS G120XE enclosed drive system for use on fans, pumps and compressors used in harsh environments and industries such as oil-and-gas/petrochemical, power plants, chemical processing, water treatment, waste processing and mining.

Today, Siemens announces the immediate availability of a new enclosed drive system, the SINAMICS G120XE, designed specifically for the demands of industrial pump, fan and compressor applications in a wide variety of markets.  Built around the popular SINAMICS G120X infrastructure drive, this new enclosed system is ideal for fast design and commissioning in industries such as oil-and-gas/petrochemical, water/wastewater, power plants, industrial climate control, refrigeration and chillers in harsh environments.  A NEMA 1 enclosure is standard, with a NEMA 12 version optional, featuring appropriate ventilation and air filters.  The base enclosure is suitable for wall-mounting to 75 hp applications, while the free-standing floor module accommodates uses to 200 hp. 

Standard electrical characteristics of this new enclosed drive system also include a UL508A listing, SCCR rating to 65kA, circuit breaker disconnect with flange-mounted operator handle and mechanical door interlock, plus control power transformer for internal power control and power module with PWM IGBT inverter.  Overload ratings allow operation in either light or high overload duty conditions. 

The enclosure ventilation fans on the SINAMICS G120XE are controlled via a relay and run only as needed, a significant energy saver and noise reduction feature.  Optional features on the enclosure include output filters and reduced voltage soft start (RVSS) bypass.   

A key feature of the G120XE is the intelligent operator panel, IOP-2.  As Siemens Enclosed Drive Product Manager Chuck Fernandez notes, “One of the really exciting aspects of this new enclosed drive system is the intuitive simplicity in setup and commissioning.  There’s no need for extensive parameter knowledge and the unit literally self-guides the operator with on-screen instructions on a keypad-guided menu.” Fernandez further notes, every rating of the G120XE is fully tested during the development stage for shock, vibration and electro-magnetic interference (EMI) in addition to many other tests. 

sinamics g120XE

In addition to the door-mounted IOP-2 keypad / display, the drive can also be commissioned, setup or modified using any Wi-Fi-enabled laptop, tablet or smartphone by installing the Smart Access Module. Another option for commissioning, setup or drive modification is to use the Siemens Totally Integrated Automation (TIA) Portal via a GSD file. 

The popular Siemens SIZER configuration software tool can also be provided to help with selecting and matching the G120X drive system with a Siemens motor and other system components. 

Communications with higher level SCADA and PLC systems is possible via PROFINET or EtherNet/IP™ with additional communication options available like PROFIBUS, MODBUS RTU and BacNet MS/TP. 

SINAMICS G120XE is ready for digitalization and remote monitoring with a built-in web-server and the ability to connect to the SINAMICS Connect 300 allowing operators and maintenance personnel to access real-time status and cloud-based analytics from anywhere using the Analyze MyDrive app installed on their mobile device. 


Chuck Fernandez is the enclosed drives product manager for Siemens Industry, Inc.

For more information regarding SINAMICS G120XE, please visit:

usa.siemens.com/sinamics-g120xe


Siemens Digital Industries (DI) is an innovation leader in automation and digitalization. Closely collaborating with partners and customers, DI drives the digital transformation in the process and discrete industries. With its Digital Enterprise portfolio, DI provides companies of all sizes with an end-to-end set of products, solutions and services to integrate and digitalize the entire value chain. Optimized for the specific needs of each industry, DI’s unique portfolio supports customers to achieve greater productivity and flexibility. DI is constantly adding innovations to its portfolio to integrate cutting-edge future technologies. Siemens Digital Industries has its global headquarters in Nuremberg, Germany, and has around 75,000 employees internationally.

Siemens Corporation is a U.S. subsidiary of Siemens AG, a global powerhouse focusing on the areas of power generation and distribution, intelligent infrastructure for buildings and distributed energy systems, and automation and digitalization in the process and manufacturing industries. Through the separately managed company Siemens Mobility, a leading supplier of smart mobility solutions for rail and road transport, Siemens is shaping the world market for passenger and freight services. Due to its majority stakes in the publicly listed companies Siemens Healthineers AG and Siemens Gamesa Renewable Energy, Siemens is also a world-leading supplier of medical technology and digital healthcare services as well as environmentally friendly solutions for onshore and offshore wind power generation. For more than 160 years, the company has innovated and invented technologies to support American industry spanning manufacturing, energy, healthcare and infrastructure. In fiscal 2018, Siemens USA reported revenue of $23.7 billion, including $5.0 billion in exports, and employs approximately 50,000 people throughout all 50 states and Puerto Rico.

Continue reading

New Sinamics G120X Drive Series Specializes in Infrastructure Pump, Fan and Compressor Applications

With power range from 1–700 hp (0.75–630 kW), Sinamics G120X is optimized for pump,
fan and compressor applications

Siemens is introducing the new Sinamics G120X drive, a simple, seamless and easy-to-use drive, designed for use in pump, fan and compressor applications in industries such as water/wastewater, HVAC/R, irrigation/agriculture and in industrial environments. Sinamics G120X has a power range of 1–700 hp (0.75–630 kW) and can operate in a temperature range from -4 to +140° F (-20 to +60° C) with any standard motor, including synchronous reluctance motors (SRM).  It has an integral DC choke which improves harmonics and EMC performance. Sinamics G120X meets all the latest and upcoming UL, NEMA and EN/IEC standards for 2019 and beyond and offers up to 100 kA short-circuit current rating (SCCR) ensuring enhanced product safety and energy efficiency.

Siemens G120X

Siemens is introducing a totally new drive series for the U.S. market. Sinamics G120X drives are especially suited for use in pump, fan and compressor applications in industries such as water/wastewater, building technology and in industrial environments.

Sinamics G120X easily integrates into existing applications and is configured for cost-optimization and resource-saving operation, which ultimately helps reduce total cost of ownership.

The compact design of the G120X saves space in the control cabinet and can also be easily integrated in to MCC solutions (including plug-in buckets).  Even without an additional output reactor, Sinamics G120X drives enable motor cable lengths of up to 492 ft. (150 m) with category C2 or C3 filter and up to 1476 ft. (450 m) without filter and have hardware-based SIL3-certified safety functions built-in.

“The Sinamics G120X offers outstanding ‘out-of-the-box’ ease of use and is simple to commission and operate using its high-resolution graphical color keypad, known as IOP-2 (intelligent operator panel), as well as the optional Wi-Fi-enabled Smart Access wireless module — both optimized for pump and fan applications,” states Nikunj Shah, product manager, Siemens, Digital Factory, US.

Shah continues, “Sinamics G120X drives offer an automatic restart function after power failures and the multi-pump/staging operation mode allows the user to control several pumps using just one drive. Its energy-saving mode automatically switches the motor on and off to save energy and reduce wear.  G120X also has built-in energy functions which display energy consumed as well as energy saved.”

The G120X has Class 3C3 coating which is suitable for harsh environments where the presence of corrosive gases such as Hydrogen Sulfide (H2S) is present.  A high C2 or C1 EMC category ensures the drive can be reliably used in any kind of industrial and public networks.

Sinamics G120X is compliant with all relevant EU and upcoming NEMA energy-saving standards and offers an operating efficiency level of over 98% (efficiency class IE2).  Its comprehensive range of integrated application-specific functions for pumps and fans ensures improved energy efficiency through amount of actual energy needed in line with the actual load which ensures the best possible performance and minimal energy losses.

Sinamics G120X is fit for digitalization and can be linked to Mindsphere by using Sinamics Connect 300 and the Mindsphere app Analyze MyDrives.  This offers users the opportunity to analyze valuable operating data gathered from the drive and enables the visualization and analysis of status information, providing users with valuable data which can be used as the basis for process optimization and maintenance strategies.  Mindsphere is the cloud-based, open IoT operating system from Siemens that connects products, plants, systems and machines, while enabling a user to harness the wealth of data generated by the Internet of Things (IoT) with advanced analytics.


Siemens Digital Factory (DF) offers a comprehensive portfolio of seamlessly integrated hardware, software and technology-based services in order to support manufacturing companies worldwide in enhancing the flexibility and efficiency of their manufacturing processes and reducing the time to market of their products.  

Contact for journalists:
Siemens
Hollie Davis
(678) 313-7256
hollie.davis@siemens.com

Contact for product information:
Siemens
John Meyer
(847) 640-1595
john.meyer@siemens.com

For specific product information and inquiries, send an e-mail to: mc.us@siemens.com 

Siemens Corporation is a U.S. subsidiary of Siemens AG, a global powerhouse focusing on the areas of electrification, automation and digitalization. One of the world’s largest producers of energy-efficient, resource-saving technologies, Siemens is a leading supplier of systems for power generation and transmission as well as medical diagnosis. With approximately 379,000 employees in 190 countries, Siemens reported worldwide revenue of $94.0 billion in fiscal 2018. Siemens in the USA reported revenue of $23.7 billion, including $5.0 billion in exports, and employs approximately 50,000 people throughout all 50 states and Puerto Rico.

Continue reading

Siemens Introduces New Servo Drive System Simplifying Motion Control for Machine Builders

Siemens offers a new servo package consisting of drive, motor and controller for
a wide variety of motion control applications

With its Sinamics S210 converter designed specifically for use with the newly developed Simotics S-1FK2 motors, Siemens is offering a new and innovative servo drive system in an initial offering from 50–750 watts. The converters come with integrated safety functions and enable rapid engineering via motion technology objects in Simatic S7-1500 controllers. They are connected to higher-level controllers via Profinet and are quickly and easily programmed by automatic motor parameterization and one-button tuning. Typical uses for this new drive system include packaging machines, handling applications such as pick-and-place, wood and plastics processing, as well as life sciences and digital printing.

“The Sinamics S210 focuses on highly-dynamic motor axis control, while the connected controller, for example the Simatic S7-1500 or S7-1500T with its extended motion control functionality, takes complete charge of positioning functions for the connected drive axes.”, says Craig Nelson, product manager for Sinamics S-series drives.

The Sinamics S210 is commissioned using an integrated web server. One-button tuning functionality allows automatic optimization of control parameters, taking into consideration the behavior of the connected mechanics by different dynamic levels.

Integrated safety functions include STO (Safe Torque Off) and SS1 (Safe Stop 1). Both can be actuated using Profisafe, STO additionally using a terminal. Additional functions are currently in the preparation stage. In conjunction with the rapid sampling and smart control algorithms of the Sinamics S210, a high-grade encoder system on the Simotics 1FK2 motor and the combination of low rotor inertia and high overload capability, allow the servomotors to achieve outstanding dynamic performance and precision.

Simotics 1FK2 motors are connected to the converters using a “One Cable Connection” (OCC), which includes the power conductors, encoder signal and brake — all grouped together in an exceptionally thin cable measuring just 9 millimeters in diameter. Its minimal cross-section makes the OCC cable thinner, lighter and more flexible than previous power cables, considerably simplifying the cabling process. This results in a single motor plug connector and connection at the converter is just as simple with user-friendly plugs with push-in terminals on the front.

To learn more about the Sinamics S210 servo system, please visit: usa.siemens.com/sinamics-s210

The new Sinamics S210 drive system with Simotics S-1FK2 servomotors and Simatic S7-1500 controllers offer users a highly-dynamic servo package with integrated safety functions and quick commissioning.   


Siemens Digital Factory (DF) offers a comprehensive portfolio of seamlessly integrated hardware, software and technology-based services in order to support manufacturing companies worldwide in enhancing the flexibility and efficiency of their manufacturing processes and reducing the time to market of their products.

For specific product information and inquiries, send an e-mail to: mc.us@siemens.com

Siemens Corporation is a U.S. subsidiary of Siemens AG, a global powerhouse focusing on the areas of electrification, automation and digitalization. One of the world’s largest producers of energy-efficient, resource-saving technologies, Siemens is a leading supplier of systems for power generation and transmission as well as medical diagnosis. With approximately 351,000 employees in 190 countries, Siemens reported worldwide revenue of $88.1 billion in fiscal 2016. Siemens in the USA reported revenue of $23.7 billion, including $5.4 billion in exports, and employs approximately 50,000 people throughout all 50 states and Puerto Rico.

Continue reading

Siemens Introduces Nema 1 and Ul Type 1 Wall-Mounting Kits for Its G-Series Drive Platform

Low-cost kits allow easy-to-install, direct mounting of G120C Compact and G120 PM240-2 modular drive

Siemens announced today the availability of wall-mounting kits for its Sinamics G120C and G120 PM240-2 modular drives.  These low-cost kits allow easy, fast installation of the drives and conform to NEMA 1 and UL Type 1 standards for interior applications. These wall-mount kits are designed in accordance with UL 61800-5-1 standards for AC drives.

Available in power ranges from ½ to 200 hp and voltages from 230V to 690V, the kits offer streamlined, compact design for use with all drive frame sizes of the corresponding Siemens drive units.  Each kit provides best-in-class space-savings and direct access to the drive-mounted operator panel for simple commissioning, condition monitoring and even troubleshooting.

The new kits accommodate all G120C, PM240-2 and PM240P-2 power modules, control units and operator panels in the Sinamics drive family.  Standardized designs permit efficient side-by-side mounting with minimal clearance, while multiple conduit knockout holes allow separate power, motor, I/O and network cabling.

Seven kits are currently available to fit all drive units from AA to F frame sizes.

Siemens offers seven sizes of NEMA 1/UL Type 1 wall-mounting kits for its popular G120C and PM240-2 modular drives. The kits feature space-savings plus multiple knockouts for separate power, motor, I/O and network cabling.

 


For specific product information, please visit:  www.usa.siemens.com/sinamics-g120

Siemens Digital Factory (DF) offers a comprehensive portfolio of seamlessly integrated hardware, software and technology-based services in order to support manufacturing companies worldwide in enhancing the flexibility and efficiency of their manufacturing processes and reducing the time to market of their products. 

Siemens Corporation is a U.S. subsidiary of Siemens AG, a global powerhouse focusing on the areas of electrification, automation and digitalization. One of the world’s largest producers of energy-efficient, resource-saving technologies, Siemens is a leading supplier of systems for power generation and transmission as well as medical diagnosis. With approximately 351,000 employees in 190 countries, Siemens reported worldwide revenue of $88.1 billion in fiscal 2016. Siemens in the USA reported revenue of $23.7 billion, including $5.4 billion in exports, and employs approximately 50,000 people throughout all 50 states and Puerto Rico.

Continue reading

Sinamics DCM DC drive products warranty extended by TWO years

Effective immediately, Siemens announces the standard 12-month warranty on newly purchased Sinamics DCM DC drive products, including DC converters, base drives, enclosure cabinets and control modules, has been extended by two years, to a total of three years from date of manufacture.

This extended warranty, according to company sources, applies to new orders only and previously placed orders cannot be included in this offer.   The extended warranty is exclusive of any other extended warranty program or initiative offered by Siemens or its sales distribution network.

The offer applies to all products in the DCM drive products line and no registration or application is required for compliance.

Siemens DCM DC drive products extended warranty
Siemens has extended the warranty on its Sinamics DCM DC drive products, including DC drives, base drives, enclosure cabinets and control modules, by two years, to a total of three years from date of manufacture, effective immediately.  


Contact for journalists:

Siemens
John Meyer
(847) 640-1595
john.meyer@siemens.com

Siemens
Hollie Davis
(770) 751-4882
hollie.davis@siemens.com

For specific product information and inquiries, call (800) 879-8079 ext. Marketing Communications or send an e-mail to: mc.us@siemens.com. Or, go to the website for full details:  www.usa.siemens.com/drives.

About Siemens USA      

Siemens Corporation is a U.S. subsidiary of Siemens AG, a global powerhouse focusing on the areas of electrification, automation and digitalization. One of the world’s largest producers of energy-efficient, resource-saving technologies, Siemens is a leading supplier of systems for power generation and transmission as well as medical diagnosis. With approximately 348,000 employees in more than 190 countries, Siemens reported worldwide revenue of $86.2 billion in fiscal 2015. Siemens in the USA reported revenue of $22.4 billion, including $5.5 billion in exports, and employs approximately 50,000 people throughout all 50 states and Puerto Rico.

Continue reading

Flexible Servo Drive System for Demanding Geared Motor Applications

Siemens has expanded its extensive drive portfolio for servo applications to include the Simotics S-1FG1 servo geared motors, which are designed for use with the Sinamics S120 drive system. Sinamics S120 drives and Simotics S-1FG1 servo geared motors are an integral component of Siemens Totally Integrated Automation (TIA), which reduces engineering time and costs. Pre-fabricated Motion-Connect signal and power cables offer an easy and reliable method of connecting the components. The units have electronic rating plates and the motors are connected via the Drive-Cliq system interface, so the system can be brought online quickly.

Siemens has expanded its extensive drive portfolio for servo applications to include the Simotics S-1FG1 servo geared motor that is optimally harmonized with the Sinamics S120 converter system. The complete integration of this drive system into Totally Integrated Automation (TIA) makes configuration and commissioning easy.

Siemens has expanded its extensive drive portfolio for servo applications to include the Simotics S-1FG1 servo geared motor that is optimally harmonized with the Sinamics S120 converter system. The complete integration of this drive system into Totally Integrated Automation (TIA) makes configuration and commissioning easy.

The engineering of the Simotics S-1FG1 servo geared motor includes high efficiency and low torsional backlash for precise, dynamic motion sequences and is available in the following versions: helical, parallel shaft, bevel and helical worm gearboxes with up to 25 transmission ratios, depending upon the type of gear and gear size required. The helical gearing of the gearboxes reduces noise and offers high efficiency.

With its highly integrated functionality and scalable number of axes, the S120 drives are suitable for use in a number of demanding motion control applications such as printing and packaging machines, storage and retrieval machines, material handling conveyor systems and dosing pumps.  The high-performance single and coordinated multi-axis drives with servo control enables ideal solutions for an increase in overall line productivity and flexibility.

The Sinamics S120 drive system is available in blocksize and booksize hardware types for use with the servo geared motors.  The power units or motor modules in booksize format have been redesigned in the 3–30A range.  Power units with a triple overload capability and the integration of the motor connection system into the motor module save a considerable amount of space in both height and width in the control cabinet.  The newly developed connection method allows fast, easy and reliable assembly and wiring, while the optimized shielding design and improved thermal separation between power semi-conductor and electronics also ensure greater ruggedness.

The small diameter of the plug-on pinion inserted into the motor shaft enables the first gear stage to render a high transmission ratio.  In turn, this means that a two-stage gearbox can be used for many applications as an alternative to a more costly three-stage unit.


Contact for journalists:

Siemens
John Meyer
(847) 640-1595
john.meyer@siemens.com

Siemens
Hollie Davis
(770) 751-4882
hollie.davis@siemens.com

For specific product information and inquiries, call (800) 879-8079 ext. Marketing Communications or send an e-mail to: mc.us@siemens.com.

About Siemens USA      

Siemens Corporation is a U.S. subsidiary of Siemens AG, a global powerhouse focusing on the areas of electrification, automation and digitalization. One of the world’s largest producers of energy-efficient, resource-saving technologies, Siemens is a leading supplier of systems for power generation and transmission as well as medical diagnosis. With approximately 348,000 employees in more than 190 countries, Siemens reported worldwide revenue of $86.2 billion in fiscal 2015. Siemens in the USA reported revenue of $22.4 billion, including $5.5 billion in exports, and employs approximately 50,000 people throughout all 50 states and Puerto Rico.

Continue reading

Siemens Offers Compact Disconnect Switches for Sinamics G120D Drives

Siemens announces immediate availability of two new compact quick disconnect switches used with the popular Sinamics G120D distributed drives. This new disconnect switch design mounts directly onto the input power connector of the drive and locks in place to provide a tight, reliable interface, in accordance with ISO 23570-3. Many applications exist in the decentralized distributed power environments, where control cabinets are being replaced with IP65 protected products.

Two versions of the new disconnect switches are now available. A 10-amp rated switch is offered for G120D drives up to 4 kW (5 hp) and features a daisy-chain Power-Y-junction box design to enable power wiring to additional G120D drives. A 25-amp rated version is offered for the heavier-duty 5.5 kW (7.5 hp) and 7.5 kW (10 hp) drive models. This larger unit features a standard Q4/2 pin configuration.

Through the introduction of these new disconnect switches, Siemens can now offer system integrators, OEMs and field maintenance personnel immediate availability to a drive and connector package for a number of applications, according to Robert Soré, product marketing manager, Sinamics general purpose drives at Siemens. “We’ve developed this product line in tandem with our solution partner Harting and we see it expanding our presence in the distributed, decentralized control markets, which include automotive, packaging, metals processing, food and beverage, as well as general conveyorized material handling.”

For more information about these new quick disconnect switches, please visit:
www.usa.siemens.com/sinamics-g120d

For specific product information and inquiries, call (800) 879-8079 ext. Marketing Communications or send an e-mail to: SiemensMTBUMarCom.industry@siemens.com.

Continue reading

New Gear Motor Drive from Siemens

Motor-integrated drive offers onboard safety features and communications

Siemens introduces the Sinamics G110M, a motor-integrated drive for Simogear gear motors, offering flexible control, integrated safety, simple installation and a space-saving design.  With a high degree of protection — up to IP66 — this new gear motor drive provides the perfect solution to most material handling-related challenges, including conveyors, warehousing, logistics, baggage and cargo handling, post and parcel shipping, plus numerous industrial applications in the automotive, appliance and test stand industries.

Simogear gear motors offer high torque density, low noise and high efficiency — and now with Sinamics G110M, it becomes easier for designers and system builders to integrate gear motors into a variety of control architectures. Plug connections for onboard I/O ensure fast installation, while optional power connectors deliver even more time savings.  The system is delivered pre-configured and the drive offers simple yet comprehensive onboard diagnostic features.  Options such as internal braking resistors and motor brakes — operational simultaneously — and integrated features such as “Quick Stop” and the limit switch function make this system ideal for conveyor applications.

For uses requiring safety technology, the Sinamics G110M offers integrated safety functions such as “Safe Torque Off” (STO), which can be activated via a fail-safe input or via Profisafe, without needing additional safety monitoring components.

Sinamics G110M features integral USS/Modbus RTU, Profibus and Profinet / EtherNet/IP communication profiles.

To watch a video of the Sinamics G110M for the material handling industry, please visit: https://www.youtube.com/watch?v=GgDxptBqpHg

For specific product information and inquiries, call (800) 879-8079 ext. Marketing Communications or send an e-mail to: mc.us@siemens.com

 

Continue reading

Siemens Drive Selector App Enjoys Growing Polarity

SINAMICS_selector_app_title_imageSimply practical. Simply good.
Drive selector app enjoys growing polarity

For some time, it has been apparent that mobile apps have been spreading more and more across the industrial environment and have become a popular medium among users. One special feature in this field is the variable frequency drive app for the easy selection of all necessary components from the respective corporate portfolio. The online selection is always up-to-date, available in many different language versions and saves the user time — laboriously poring over catalogs is now a thing of the past.

Due to the special requirements in some cases, selecting the right drive is not always straightforward and can often waste valuable time. After all, the fields of application and the requirements regarding operating behavior and costs are wide-ranging. Whether the drives are used to operate pumps, fans or compressors, or to drive conveyors, mixers or kneaders, it is important to find the appropriate drive for the required range of performance and voltage quickly and easily for each of these applications. And wherever possible, this must be done without the need for expert knowledge of drive technology.

The Sinamics Selector app helps you to select a suitable drive in just a few simple steps and also suggests alternative options.

The Sinamics Selector app helps you to select a suitable drive in just a few simple steps and also suggests alternative options.

Assembling components by smartphone

In order to simplify this sometimes complex process, Siemens, for example, has been offering its Sinamics Selector app free-of-charge. This is a solution that displays the entire collection of products from the portfolio of low-voltage frequency drives — Sinamics V20, G120C, G120 and G120P — on the most popular iOS and Android smartphones and can be used both online and offline. This offline capability is of particular importance in regions which do not have full cellphone coverage. Since Version 4.0, not only have brochures, product videos and application examples (Fig. 1) been available to users and electrical distributors, but also more language versions.

Everything up-to-date

Katharina Roehrlein, marketing manager for Sinamics drive systems at the Siemens Digital Factory division, explains additional innovations: “With the latest update, Version 5.0, we have adopted the second generation of the Sinamics G120 modular Frame Size D-E, as well as the Sinamics V20 Power Extension up to 30 kW, into the app. In addition, we have integrated more technical values such as resistance, peak performance and continuous power ratings into the logic of the app. And for good reason, because we want to make it as easy as possible for our customers to find the right drive in order to save valuable time.”

As a matter of principle, when assembling the appropriate components, the Sinamics Selector app offers not only a product-specific, but also an application-specific approach. In other words: either the user knows from the outset which frequency drive is required, or the app guides the user step-by-step to the right drive by asking for key parameters (Fig. 2). The information held by the Sinamics Selector app is kept up-to-date at all times by the central storage of data and continuous updates. Bob Hendrickson, applications engineer at Wesco, one of the largest distributors in the United States, regards this as an enormous advantage over conventional catalogs, especially when the app can save him a great deal of time in preparing a bid. “The Sinamics Selector app is very helpful as it lets me create a complete bill of materials for a customer offer very quickly. This option saves me a huge amount of time since I no longer have to create bills of materials by hand. The app also makes it easier for me to respond to queries arising from projects when I’m on the road and don’t have any catalogs or other documents to hand.”

Bid preparation made easy

After choosing the required type of frequency inverter, the rated output, device options and accessories can then be selected and adapted individually — if necessary, also with the support of the respective Siemens contact, whose details are also stored in the app. Once the components have been selected, the user has the option of either saving or emailing them. To make it easier for end-users to get in touch later, the headers and footers of the email can be adapted individually, for example, with personal contact information. The overview includes actual part numbers for all of the selected components. This can be used as information for the customer, but also as the basis for ordering specific components or preparing an offer at the local dealer/distributor. Kevin Young, application engineer at electrical distributor C&E Sales Inc., in the U.S., also confirms this: “I really like the Sinamics Selector app. I copy the result into my bill of materials, which enables me to immediately present a bid to my customer.” His colleague Jay Swank adds, “I use the application almost every day now.”

Over 15,000 downloads and counting…

Since the introduction of the first version, the Sinamics Selector app has been installed 17,000 times on mobile devices worldwide — and the number is still rising. Apart from Europe, China and the U.S., this trend is being led by key markets such as India, Brazil and Mexico. “It is particularly important in these countries to have a solution in the local language which also functions faultlessly offline. The email containing the results can be stored and then transmitted when sufficient network capacity is available again,” adds Ralf Weber from the Siemens Digital Factory division responsible for the app.

Think global, act local

Due to the great success of the app in all language versions offered thus far, Siemens is planning the integration of additional languages, as well as the continuous support and expansion of the product range covered. The main focus here is on Europe, particularly the eastern regions.

 

For more information about the Sinamics Selector app, visit:
www.usa.siemens.com/sinamics-selector-pr

Access – online and offline
Cost – Free-of-charge
Platforms – iOS, Android
Languages – English, German, French, Italian, Spanish, Portuguese, Chinese, Russian, Korean and Turkish

Quicklink to the Sinamics Selector app: http://ow.ly/WFRe5

 

For more information on this story, please contact:

SIEMENS INDUSTRY, INC.
DIGITAL FACTORY
MOTION CONTROL — GENERAL MOTION CONTROL
390 Kent Avenue
Elk Grove Village, IL 60007
Phone: 847-640-1595
Fax: 847-437-0784
Web: www.usa.siemens.com/motioncontrol
Email: mc.us@siemens.com
Attention: John Meyer, Manager, Marketing Communications

Continue reading

Siemens offers Sinamics G120C drives in new smaller frame size AA (FSAA)

 

sinamics_g120c_fsaa

New Sinamics G120C FSAA — the “Tiny Drive” in frame size AA from Siemens Industry, Inc.

Siemens announced today immediate availability of its popular Sinamics G120C drive in AA size, which replaces the previous G120C frame size A in power ratings up to 2.2 kW
(3 hp), including communication variants for USS, PROFIBUS, PROFINET and EtherNet/IP. Offering high power density in a smaller footprint, the new “tiny drive” offers fully compatible replacement for the equivalent power ratings on the previous version.

On new control cabinet designs, the G120C FSAA has significant size advantages, up to 32% less overall volume, for the OEM or integrator, but requires no re-engineering, when migrating from the G120C FSA on current jobs. Overall dimensions on the smaller unit, designed for use with PROFIBUS and USS variants are only 173mm high x 73mm wide x 155mm deep (6.8” x 2.8” x 6.1”).

Other benefits of the new G120C FSAA include use with increased motor cable lengths,
up to 50m (165 ft) for shielded and 150m (495 ft) for unshielded, plus identical voltage ratings, current ratings, load cycles and compatibility with all standard Siemens options such as operator panels, input and output chokes, as well as external Class B EMC filters.

sinamics_g120c_family

Sinamics G120C FSAA has smaller footprint, up to 32% less volume, but delivers comparable features to previous version of this Siemens drive.

The G120C FSAA offers UL open type, IP20 protection in the 0.55–2.2 kW (0.75–3 hp) range.

Through the introduction of this new tiny drive, Siemens can now offer machine builders another economical, space-saving and easy-to-operate standard AC drive with a wide range of functions, according to Robert Soré, product marketing manager for general purpose drives at Siemens. Typical applications for this product span a broad machine and equipment range, including smaller test stands, mixers, conveyors, fans, pumps, compressors and basic production machinery.

 

For more information about the Sinamics G120C drive platform, please visit: www.usa.siemens.com/sinamics-g120c-pr

 

For specific product information and inquiries, call (800) 879-8079 ext. Marketing Communications or send an e-mail to: mc.us@siemens.com

Continue reading