Contact us today:
(847) 934-4500
tdaro@bernardandcompany.com
Contact us today:
(847) 934-4500
tdaro@bernardandcompany.com
No. 870 is a 500°F (260°C), inert atmosphere oven from Grieve, currently used for aging rubber parts at the customer’s facility. Workspace dimensions of this oven measure 36” W x 60” D x 36” H. 12 KW are installed in lncoloy sheathed tubular heating elements, while a 600 CFM, ½ HP recirculating blower provides universal airflow to the workload.
This Grieve inert atmosphere oven has 4” insulated walls, an aluminized steel exterior and Type 430 stainless steel interior. The oven features inert atmosphere construction, including a pressure regulator, flow meter, pressure gauge, inner oven walls sealing directly against ½” thick silicone rubber door seal, air jacket on the inner oven for cooling, blower shaft seal, positive latching door hardware, adjustable offset door hinges, outlet with pressure relief, interior seams welded gas-tight and all wall penetrations fitted with compression fittings. Also onboard is a 650 CFM blower with 2-position motorized dampers to pull air through the air jacket on the inner oven for cooling.
Controls on No. 870 include a recording and programming temperature controller.
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese
No. 1033 is a 500ºC (932ºF) inert atmosphere oven from Grieve, currently used for heating polymer fibers at the customer’s facility. Workspace dimensions of this oven measure 54” W x 36” D x 84” H. 60 KW are installed in Incoloy-sheathed tubular elements to heat the oven chamber, while a 10,000 CFM, 7-1/2 HP recirculating blower provides vertical downward airflow to the workload.
This Grieve oven features 8” thick insulated walls plus an aluminized steel exterior and Type 304, 2B finish stainless steel interior. The inert atmosphere construction comprises a gas pressure regulator, flow meter, pressure gauge, internal high-temperature gasket, all welded expansion connection in doorway throat, air jacket on inner oven for cooling, ½” thick cellular silicone rubber atmosphere seal, blower shaft seal, pneumatic positive latching door hardware, adjustable offset door hinges, outlet with pressure relief, interior seams all welded gas-tight plus all wall penetrations are fitted with compression fittings. A 0-1500 CFM blower pulls air through the air jacket on the inner oven for faster cooling.
Controls on No. 1033 include a digital programming temperature controller, manual reset excess temperature controller with separate contactors, recirculating airflow safety switch, paperless event recorder, SCR power controller and trace level oxygen analyzer.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 966 is a 1250ºF, electrically-heated, inert atmosphere oven from Grieve, currently used for stress relief of machined steel at the customer’s facility. Workspace dimensions of this oven measure 24” W x 36” D x 24” H. 18KW are installed in Incoloy-sheathed tubular elements to heat the oven chamber, while a 1000 CFM, 1-HP recirculating blower provides horizontal front-to-rear airflow to the workload.
This Grieve high-temp, inert atmosphere oven features 10” insulated walls, comprising 2” of 1900ºF block and 8” of 10lb/cf density rockwool, aluminized steel exterior, Type 304, 2B finish stainless steel interior, plus inner and outer door gaskets. The inner gasket seals directly against the door plug, while the outer gasket seals directly against the front face of the oven. An integral oven leg stand is also provided.
Inert atmosphere construction on this Grieve oven includes pressure gauge, internal high-temperature gasket, all-welded construction in the doorway throat, air jacket on inner oven for cooling, ½” thick cellular silicone rubber atmosphere seal, blower shaft seal, positive latching door hardware, adjustable offset door hinges, outlet with pressure relief, interior seams welded gas-tight and all wall penetrations fitted with compression fittings. A 650 CFM stainless steel blower pulls air through the air jacket on the inner oven for cooling.
Controls on No. 966 include a digital programming temperature controller, manual reset excess temperature controller with separate contactors and recirculating blower airflow safety switch.
For more information, please contact: THE GRIEVE CORPORATION, 500 Hart
Road, Round Lake, Illinois 60073-2835 USA. Phone: (847) 546-8225. Fax: (847) 546-
9210. Web: www.grievecorp.com. Email: sales@grievecorp.com. Attention: Frank
Calabrese.
Continue reading
No. 967 is an electrically-heated 500°F(~260°C) inert atmosphere oven from Grieve, currently used for various heat treating operations at the customer’s facility. 9 KW are installed in Incoloy sheated tubular heating elements. Workspace dimensions are 24” wide x 24” deep x 24” high. A 400 CFM, 1/3-HP recirculating blower provides horizontal front-to-rear airflow to the workload.
The unit has 4” insulated walls, an aluminized steel exterior and Type 430, 2B finish stainless steel interior. The door is equipped with adjustable positive-latching door hardware and adjustable offset hinges. A 130 CFM blower pulls air through the air jacket on the inner oven for cooling and a solenoid automatically opens the outlet for purging.
On this Grieve inert atmosphere oven, the inner oven walls are sealed directly against a 1/2” thick silicone rubber door seal with an air jacket installed on the inner oven for cooling and a blower shaft seal and outlet with pressure relief also onboard. All the interior seams are welded gas-tight and all wall penetrations are equipped with compression fittings.
Controls onboard No. 967 include a digital programming temperature controller, manual reset excess temperature controller with separate contactors and a recirculating blower airflow safety switch. The critical pressure of the oven chamber is monitored with a pressure regulator, flow meter and pressure gauge.
For more information, please contact: THE GRIEVE CORPORATION, 500 Hart Road, Round Lake, Illinois 60073-2835 USA. Phone: (847) 546-8225. Fax: (847) 546-9210. Web: www.grievecorp.com. Email: sales@grievecorp.com. Attention: Frank Calabrese.
NEWS RELEASE: THE GRIEVE CORPORATION Agency contact: DATE: May 21, 2010 Tim Daro 847-934-4500
Continue reading
No. 964 is an electrically-heated, 1000ºF (~538ºC) inert atmosphere oven from Grieve, currently used for bluing steel at the customer’s facility. Workspace dimensions measure 24” W x 24”D x 36”H. 18KW are installed in Incoloy sheathed tubular elements to heat the unit, while a 750 CFM, 3/4-HP recirculating blower motor provides horizontal front-to-rear airflow to the workload.
This Grieve inert atmosphere oven features 8” thick insulated walls comprising 2” of 1900ºF block and 6” of 10 lb/cf density rockwool, aluminized steel exterior and Type 304, 2B stainless steel interior with continuously backwelded seams. Special construction features for inert atmosphere use with the customer’s steam boiler include a pressure gauge, internal high-temperature gasket, all-welded expansion connection in doorway throat, air jacket on the inner oven for cooling, 1/2” thick cellular silicone rubber atmosphere door seal, blower shaft seal, positive door latching hardware, adjustable offset door hinges, outlet with pressure relief, all interior seams welded gas-tight and all wall penetrations fitted with compression fittings. An integral oven leg stand is also provided.
Controls on No. 964 include a digital programming temperature controller, manual reset excess temperature controller with separate contactors, recirculating blower airflow safety switch, 10” diameter, 2-pen circular chart temperature recorder, SCR power controller and fused disconnect switch.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 968 is an electrically-heated, 750ºF inert atmosphere oven from Grieve, currently used for processing glass and stainless steel components for lab and production use at a customer’s facility. Workspace dimensions of this oven measure 24” W x 36” D x 24”H. 12KW installed in Incoloy sheathed tubular heating elements power the unit, while a 400CFM, 1/3HP recirculating blower provides horizontal front-to-rear airflow to the workload.
This Grieve oven features 6” thick insulated walls, an aluminized steel exterior, Type 304, 2B finish stainless steel interior, a door equipped with adjustable positive latching door hardware and adjustable offset hinges, plus an integral leg stand.
Inert atmosphere construction on No. 968 also includes a pressure regulator, flow meter, pressure gauge, inner oven walls sealing directly against a 1/2” thick silicone rubber door seal, air jacket on the inner oven for cooling, blower shaft seal, outlet with pressure relief, interior seams welded gas-tight and all wall penetrations equipped with compression fittings.
A 325CFM blower is onboard to pull air through the air jacket on the inner oven for cooling.
Controls on this inert atmosphere oven include a solenoid to open an outlet for automatic purge, digital programming temperature controller, manual reset excess temperature controller with separate contactors and recirculating blower airflow safety switch.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 938 is a 1250°F electrically-heated inert atmosphere oven from Grieve, currently used for heat treating copper parts at the customer’s facility. Workspace dimensions measure 36”W x 120”D x 36”H. 80kW installed in Incoloy-sheathed tubular heating elements deliver power to the unit, while a 6,000 CFM, 5 HP recirculating blower provides a universal front to rear airflow to the load.
This inert atmosphere oven features an aluminized steel exterior, Type 304, 2B finish stainless steel interior and 10” insulated walls, comprising 2” of 1900°F block and 8” of 10 lb./cu. ft. density rockwool insulation. Inner and outer door gaskets are provided, with the inner gasket sealing against the door plug, while the outer gasket seals directly against the front face of the oven body.
No. 938 has all construction features onboard for inert atmosphere operation, including pressure regulator, pressure gauge, internal high temperature gasket, all-welded expansion connection in doorway throat, air jacket on inner oven body for cooling, 1/2” thick silicone rubber atmosphere seal, blower shaft seal, positive latching door hardware, adjustable offset door hinges, outlet with pressure relief, interior seams welded gas-tight and all wall penetrations fitted with compression fitting for maximum integrity.
Additionally, a 975 CFM blower is provided to pull air through the air jacket on inner oven for cooling. The entire unit is built to meet JIC / NEMA 12 electrical standards.
A digital programming temperature controller, manual reset excess temperature controller with separate contactors and SCR power controller are included, as well.
This Grieve inert atmosphere oven is mounted to an integral leg stand.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 930 is an electrically-heated, 500°F inert atmosphere cabinet oven from Grieve, currently used for liquid flow solder masking under a nitrogen atmosphere. Workspace dimensions measure 38” W x 38” D x 38” H. 30 kW are installed in Incoloy-sheathed tubular heating elements, while a 1500 CFM, 1-1/2 HP recirculating blower provides horizontal airflow to the load.
This Grieve inert atmosphere cabinet oven features 4” insulated walls, aluminized steel exterior, Type 430 stainless steel interior and an automatic door switch to shut off heaters and blower when the door is opened.
Special inert atmosphere construction features include a pressure regulator, flowmeter, pressure gauge, inner oven walls sealing directly against a 1/2” thick silicone rubber door seal, air jacket on the inner oven for cooling, blower shaft seal, positive latching door hardware, adjustable offset door hinges, outlet with pressure relief, interior seams welded gas-tight and all oven wall penetrations equipped with compression fittings to maintain atmosphere integrity.
No. 930 also includes a digital programming temperature controller, manual reset excess temperature controller with separate contactors, recirculating blower airflow safety switch and fused disconnect switch.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 842 is a high-temperature, 1250oF electrically-heated inert atmosphere oven from Grieve, currently used for various stress relieving operations at a customer’s facility.
Workspace dimensions of this oven measure 36” wide x 48” deep x 36” high. 24KW installed in Incoloy-sheathed tubular heating elements furnish the heat, while a 1400 CFM, 1 ½-HP recirculating blower provides front to back horizontal airflow to the workload.
This Grieve oven has 10” insulated walls, aluminized steel exterior and Type 304, 2B finish stainless steel interior, plus three roller rails at the bottom of the workspace to support 2,500 lb. loads. The oven includes an integral, heavy-duty leg stand.
Safety and control equipment on-board this Grieve oven include a 975 CFM blower to pull air through an air jacket on the inner oven for cooling, a digital indicating temperature controller, manual reset excess temperature controller with separate contactors, recirculating blower airflow safety switch, 10” diameter circular chart recorder and SCR power controller.
Grieve inert atmosphere oven construction features include all interior seams welded gas-tight, all wall penetrations welded inside and fitted with compression fittings outside, inner oven walls extended through oven throat area to seal directly against silicone rubber door seal, 2-point cam action positive latching door hardware, inert atmosphere inlet with pressure regulator, atmosphere flowmeter, and pressure gauge to indicate interior oven pressure.
For more information, please contact: