Contact us today:
No. 967 is an electrically-heated 500°F(~260°C) inert atmosphere oven from Grieve, currently used for various heat treating operations at the customer’s facility. 9 KW are installed in Incoloy sheated tubular heating elements. Workspace dimensions are 24” wide x 24” deep x 24” high. A 400 CFM, 1/3-HP recirculating blower provides horizontal front-to-rear airflow to the workload.
The unit has 4” insulated walls, an aluminized steel exterior and Type 430, 2B finish stainless steel interior. The door is equipped with adjustable positive-latching door hardware and adjustable offset hinges. A 130 CFM blower pulls air through the air jacket on the inner oven for cooling and a solenoid automatically opens the outlet for purging.
On this Grieve inert atmosphere oven, the inner oven walls are sealed directly against a 1/2” thick silicone rubber door seal with an air jacket installed on the inner oven for cooling and a blower shaft seal and outlet with pressure relief also onboard. All the interior seams are welded gas-tight and all wall penetrations are equipped with compression fittings.
Controls onboard No. 967 include a digital programming temperature controller, manual reset excess temperature controller with separate contactors and a recirculating blower airflow safety switch. The critical pressure of the oven chamber is monitored with a pressure regulator, flow meter and pressure gauge.
For more information, please contact: THE GRIEVE CORPORATION, 500 Hart Road, Round Lake, Illinois 60073-2835 USA. Phone: (847) 546-8225. Fax: (847) 546-9210. Web: www.grievecorp.com. Email: firstname.lastname@example.org. Attention: Frank Calabrese.
NEWS RELEASE: THE GRIEVE CORPORATION Agency contact: DATE: May 21, 2010 Tim Daro 847-934-4500