Contact us today:
(847) 934-4500
tdaro@bernardandcompany.com
Contact us today:
(847) 934-4500
tdaro@bernardandcompany.com
Market leader in sludge and industrial wastewater treatment equipment brings new ideas to market at major Chicago event
Centrisys/CNP (Kenosha, Wisconsin) will attend the 92nd WEFTEC (Water Environment Federation Technical Exhibition and Conference) in Chicago, IL. The event runs from September 23 through the 25 at McCormick Place Convention Center. Centrisys/CNP is located at Booths 7708 and 7711 in the North Hall. The company’s THK Sludge Thickener and PONDUS™ Thermo-Chemical Hydrolysis Process will be featured at the show.
During the event, Centrisys personnel will conduct three in-booth presentations. On Monday, September 23 at 3 p.m., Centrisys/CNP shares an update on the first U.S. installation of a Passavant® hydrograv® adapt system that eliminates the need for clarifier systems. An in-booth demonstration unit will be on display. On Tuesday, September 24 at Noon, the company announces the CalPrex Pre-Digestion WRF project results and at 3 p.m., they talk about the recent THK installation updates.
Centrisys/CNP also has two technical sessions during WEFTEC. On Tuesday, September 24 at 4 p.m. in Room N426C, CNP President Gerhard Forstner discusses the “Economic Analysis of Removing Orthophosphate and Improving Dewaterability of Digested Sludge by Post-Digestion AirPrex® Technology.”
The second session is on Wednesday, September 25 at 2 p.m. in Room S505A, where Menachem Tabanpour, CNP Vice President of Business Development, presents his paper, “High Efficiency Calcium Phosphate Recovery Technology at the Madison Metropolitan Sewerage District: Stability Metrics, Design Optimization and Performance.”
Stop by Booth 7708 and 7711 to learn more about the Centrisys/CNP technology.
For more information, please contact:
Centrisys/CNP
9586 58th Place
Kenosha, WI 53144
262-654-6006
marketing@centrisys.com
www.centrisys-cnp.com
Michele Whitfield or Jessie Jones
No. 1048 is a 350°F (177°C), clean room oven from Grieve, currently used for final cure of hardcoated optical lenses at the customer’s facility. Workspace dimensions of this oven measure 54” W x 63” D x 72” H. 60 KW are installed in Incoloy sheathed tubular heating elements, while a 6000 CFM, 5-HP recirculating blower provides horizontal airflow to the workload.
The Grieve clean room oven features 6” insulated walls, Type 304, 2B finish stainless steel interior with continuously backwelded seams and an aluminized steel exterior which is finished with white epoxy paint and a #4 brushed finish stainless steel door cover. The oven is humidity controlled, including dew point sensor and steam humidifier.
Additional features include a motorized damper on exhaust for accelerated cooling, 24” x 24” x 6” thick HEPA fresh air filter with 2” prefilter, four (4) 30” x 24” x 12” thick stainless steel high temperature HEPA recirculating filters and minihelic pressure gauge across recirculation filters, as well as an 8” x 10” double pane window, interior oven light and a circuit breaker disconnect switch. The oven includes all safety equipment for handling flammable solvents (including explosion venting door hardware and 325 CFM powered forced exhauster) and NFPA 79 electrical construction (including NEMA 12 control panel and rigid conduit.)
Controls on the No. 1048 include a digital programming temperature controller to control temperature and humidity, manual reset excess temperature interlock with separate contactors and an SCR power controller.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, Illinois 60073-2835
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese
SencorpWhite, Hyannis, Massachusetts, industry leader in thermoforming machines, is pleased to announce today a new distribution agreement for the United States and Canada with WM Thermoforming Machines.
WM Thermoforming Machines of Stabio, Switzerland, www.wm-thermoforming.com designs and manufactures both in-line and tilt-bed thermoformers that will greatly expand market presence for SencorpWhite. Their FC and Flex Series in-line thermoformers are all-electric with the size and through-put that complements SencorpWhite 2500 and ULTRA series thermoformers. The FT and Twist Series tilt-bed thermoformers, with optional extrusion and rimming stations, fulfils the market requirement for high-volume food container applications.
With this new partnership, SencorpWhite now offers an extended range of thermoforming technology for a broader range of applications. In addition, WM enters the North American market with a highly respected partner, and the expertise and service backed by over seventy years of experience.
The WM-Sencorp team will be at the SPE Thermoforming Conference in Milwaukee, Wisconsin from September 9-11. For more information, please visit: https://thermoformingdivision.com/conference. SencorpWhite will also be exhibiting at Pack Expo in Las Vegas at Booth C-2205 from September 23-25, www.packexpolasvegas.com and the K-Show in Dusseldorf, Germany from October 16-23 www.k-online.com
About SencorpWhite
SencorpWhite, a Connell Limited Partnership portfolio company, is a leading provider of unique end-to-end solutions for the packaging and management of high-value inventory. The company’s products and services, which range from innovative thermoformers and other packaging technologies to automated storage and retrieval systems plus inventory management software, cover the entire supply chain spectrum, from the point-of-manufacture through distribution and point-of-use.
For more information, please contact:
Victoria Garofalo
SencorpWhite
400 Kidds Hill Rd
Hyannis, MA 02601 USA
Phone: 508-771-9400
Email: VGarofalo@sencorpwhite.com
www.sencorpwhite.com
Exact Metrology, a leading provider of 3D and CT scanning equipment and metrology services, now offers the GOM CT scanner — the most accurate industrial CT scanner currently on the market. The GOM CT scanner offers the highest accuracy and highest resolution of any 225kV system available today and Exact Metrology devised the “GOM CT Challenge” to prove this.
“If a company is considering the purchase of a CT scanner, they can call us and validate the suitability, then send us a part. We’ll scan it and send them the images. If they don’t believe the output is superior to other scanners in the 225kV range, we’ll send them $100…no strings attached,” said Steve Young, co-president of Exact Metrology.
For more details and an entry form, please use this link: https://www.exactmetrology.com/challenge
If you have any questions regarding the GOM CT Challenge, please call Steve Young from Exact Metrology at 513-815-4491.
For more information on the GOM CT scanner, please see:
https://www.exactmetrology.com/metrology-equipment/gom-ct-scanner
Exact Metrology is an ISO 9001:2008, AS9100, FFL and ITAR Certified Company.
Exact Metrology, with facilities in Cincinnati and Milwaukee and affiliated offices throughout the Midwest, is a comprehensive metrology services provider, offering customers 3D scanning, reverse engineering, quality inspection, product development CT scanning and services and 2D drawings. The company also provides turnkey metrology solutions, including equipment sales and lease/rental arrangements.
GOM GmbH
GOM develops, produces and distributes software, machines and systems for 3D coordinate measuring technology, 3D computed tomography and 3D testing based on latest research results and innovative technologies. With more than 60 sites globally and more than 1,000 metrology specialists, GOM guarantees professional advice as well as support and service. More than 14,000 system installations improve the product quality and manufacturing processes in the automotive, aerospace and consumer goods industries.
For more information, please contact:
EXACT METROLOGY, INC.
Steve Young
11575 Goldcoast Drive
Cincinnati, OH 45249
Telephone:
Local: 513.831.6620
Toll Free: 855.727.9226
www.exactmetrology.com
stevey@exactmetrology.com
Stay tuned for more on this story and for additional information, please contact:
Steve Young
Exact Metrology, Inc.
11575 Goldcoast Drive
Cincinnati, OH 45249
Phone: 614-264-8587
Local: 513-831-6620
www.exactmetrology.com
stevey@exactmetrology.com
No. 841 is a 650°F (343°C), universal oven from Grieve, currently used for a variety of heat treatments at the customer’s facility. Workspace dimensions of this oven measure 36” W x 36” D x 36” H. 9 KW are installed in Incoloy sheathed tubular heating elements, while a 600 CFM, 1/2 HP recirculating blower provides universal airflow to the workload.
This Grieve universal oven features 6” insulated walls, aluminized steel exterior and Type 430 stainless steel interior with double doors. Additional features include a workspace floor reinforced for 500 lbs loading at removable subway grate and an integral leg stand.
Controls on the No. 841 include a digital programming temperature controller, manual reset excess temperature controller with separate contactors and a recirculating blower airflow safety switch.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, Illinois 60073-2835
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese
Durex Industries, Cary, Illinois, a leading manufacturer of electric industrial heaters, sensors, and systems, now offers screw plug, flange immersion and circulation heaters with fast turn shipping capabilities.
Durex uses product platforms to provide standard “catalog” type designs as well as customized designs in the same fast turnaround window. Plug heaters ship in 3 to 5 days. Flange heaters ship in 5 to 7 days. Circulation heaters in 9 to 12 days. Regardless if standard or custom configured. In addition, there is no upcharge for customized units or “non-standard” configurations.
To facilitate this fast response, Durex has tech support personnel manning the phones to provide fast, intelligent support to get the right solution into customer hands as quickly as possible.
Durex builds standard as well as custom heaters for a host of applications and industries, including power plants, oil & gas, chemical and petrochemical, pharmaceutical, plastics, packaging, heat treating, cleaning & plating, aerospace, semiconductor processing, and food service equipment.
About Durex Industries
Durex Industries is a leader in the design and manufacture of electric industrial heaters, temperature sensors, controls and process heating systems. Located in Cary, Illinois, company facilities were recently expanded to over 200,000 square feet to accommodate production expansion as well as R&D and engineering support teams.
For more information, please contact:
Rich Hartfelder, Director of Sales & Marketing
Durex Industries
190 Detroit Street
Cary, IL 60013
Phone: 866-712-5014
sales@durexindustries.com
www.durexindustries.com
NEMA 1 enclosed drive system is listed to UL508A and offered as wall-mounted or free-standing enclosures
Today, Siemens announces the immediate availability of a new enclosed drive system, the SINAMICS G120XE, designed specifically for the demands of industrial pump, fan and compressor applications in a wide variety of markets. Built around the popular SINAMICS G120X infrastructure drive, this new enclosed system is ideal for fast design and commissioning in industries such as oil-and-gas/petrochemical, water/wastewater, power plants, industrial climate control, refrigeration and chillers in harsh environments. A NEMA 1 enclosure is standard, with a NEMA 12 version optional, featuring appropriate ventilation and air filters. The base enclosure is suitable for wall-mounting to 75 hp applications, while the free-standing floor module accommodates uses to 200 hp.
Standard electrical characteristics of this new enclosed drive system also include a UL508A listing, SCCR rating to 65kA, circuit breaker disconnect with flange-mounted operator handle and mechanical door interlock, plus control power transformer for internal power control and power module with PWM IGBT inverter. Overload ratings allow operation in either light or high overload duty conditions.
The enclosure ventilation fans on the SINAMICS G120XE are controlled via a relay and run only as needed, a significant energy saver and noise reduction feature. Optional features on the enclosure include output filters and reduced voltage soft start (RVSS) bypass.
A key feature of the G120XE is the intelligent operator panel, IOP-2. As Siemens Enclosed Drive Product Manager Chuck Fernandez notes, “One of the really exciting aspects of this new enclosed drive system is the intuitive simplicity in setup and commissioning. There’s no need for extensive parameter knowledge and the unit literally self-guides the operator with on-screen instructions on a keypad-guided menu.” Fernandez further notes, every rating of the G120XE is fully tested during the development stage for shock, vibration and electro-magnetic interference (EMI) in addition to many other tests.
In addition to the door-mounted IOP-2 keypad / display, the drive can also be commissioned, setup or modified using any Wi-Fi-enabled laptop, tablet or smartphone by installing the Smart Access Module. Another option for commissioning, setup or drive modification is to use the Siemens Totally Integrated Automation (TIA) Portal via a GSD file.
The popular Siemens SIZER configuration software tool can also be provided to help with selecting and matching the G120X drive system with a Siemens motor and other system components.
Communications with higher level SCADA and PLC systems is possible via PROFINET or EtherNet/IP™ with additional communication options available like PROFIBUS, MODBUS RTU and BacNet MS/TP.
SINAMICS G120XE is ready for digitalization and remote monitoring with a built-in web-server and the ability to connect to the SINAMICS Connect 300 allowing operators and maintenance personnel to access real-time status and cloud-based analytics from anywhere using the Analyze MyDrive app installed on their mobile device.
Chuck Fernandez is the enclosed drives product manager for Siemens Industry, Inc.
For more information regarding SINAMICS G120XE, please visit:
usa.siemens.com/sinamics-g120xe
Siemens Digital Industries (DI) is an innovation leader in automation and digitalization. Closely collaborating with partners and customers, DI drives the digital transformation in the process and discrete industries. With its Digital Enterprise portfolio, DI provides companies of all sizes with an end-to-end set of products, solutions and services to integrate and digitalize the entire value chain. Optimized for the specific needs of each industry, DI’s unique portfolio supports customers to achieve greater productivity and flexibility. DI is constantly adding innovations to its portfolio to integrate cutting-edge future technologies. Siemens Digital Industries has its global headquarters in Nuremberg, Germany, and has around 75,000 employees internationally.
Siemens Corporation is a U.S. subsidiary of Siemens AG, a global powerhouse focusing on the areas of power generation and distribution, intelligent infrastructure for buildings and distributed energy systems, and automation and digitalization in the process and manufacturing industries. Through the separately managed company Siemens Mobility, a leading supplier of smart mobility solutions for rail and road transport, Siemens is shaping the world market for passenger and freight services. Due to its majority stakes in the publicly listed companies Siemens Healthineers AG and Siemens Gamesa Renewable Energy, Siemens is also a world-leading supplier of medical technology and digital healthcare services as well as environmentally friendly solutions for onshore and offshore wind power generation. For more than 160 years, the company has innovated and invented technologies to support American industry spanning manufacturing, energy, healthcare and infrastructure. In fiscal 2018, Siemens USA reported revenue of $23.7 billion, including $5.0 billion in exports, and employs approximately 50,000 people throughout all 50 states and Puerto Rico.
Continue reading
Machine tool builder of various mills introduces new moldmaking machine
Wixom, Michigan-On July 24-25, Zimmermann Inc., the North American affiliate of Zimmermann GmbH in Germany, hosted an open house at its headquarters here for its customers and prospects in North America. Among the crowd were many major suppliers to aerospace and automotive, as well as other large part producers for the OEM, media from the industry, suppliers and other associates of Zimmermann. Machines were on display, highlighted by the company’s FZ33, a compact and highly flexible 5-axis gantry mill designed specifically for moldmaking.
Presentations were given throughout the event, which also featured displays from a number of Zimmermann business partners, including Mapal, Keller, Siemens, Zoller, Heidenhain, Fischer, Tebis, Unisorb, Weiss and Haimer.
The open house was hosted by Zimmermann GmbH President Frieder Gänzle, as well as Zimmermann, Inc. President Cornelius Kiesel and his team for North American engineering, sales and service.
Gänzle commented, “We are very committed to success in the American moldmaking market, as we have experienced good results in aerospace and other large component production for years here.” Kiesel echoed that sentiment, “Our customers are growing in number in the moldmaking industry, owing to the solid stability of our machines, with their highly flexible programming capability and swivel 5-axis head, that allow very fine finishing on the mold surfaces, as well as intricate pocket machining with a high degree of accuracy and repeatability.”
One of the main suppliers to Zimmermann for CNC is Heidenhain and Gisbert Ledvon, the company’s marketing manager who attended the event, observed, “Zimmermann is a very good customer, as they work closely with us and their customers to produce CNC programs for application-specific purposes. They also put on a very fun event!”
As a testimony to the long-lasting quality of Zimmermann milling machines, a unit built over 20 years ago was also on display. This machine is currently being retrofitted for resale to an interested customer. (Interested parties may contact Cornelius Kiesel at Zimmermann for details.) The machine is well suited to the aerospace industry, where Zimmermann offers its portal milling machines for spars and stringers for all commercial aircraft currently in use.
All attendees enjoyed the food, evening entertainment and collegiality at the event.
For more information, please contact:
Zimmermann, Inc.
30587 Century Drive
Wixom, MI 48393
Phone: 248-305-9707
www.f-zimmermann-inc.com
Attention: Lena Kiesel, Marketing Manager
Leading supplier of fast hole EDMs now offers a new CNC wire-cut EDM machine, S-EW3 at an affordable price.
Beaumont Machine, located in Southwest Ohio, has updated its EDM line with a new machine, the S-EW3. This 5-axis servo motor EDM (Electrical Discharge Machine) combines several key features for only $69,900.00. These include compact space, approach control, corner control, auto threader and training software.
The S-EW3 Wire EDM is designed by Optimum Machine Solutions and built by a strong Taiwan manufacturer of wire cutting machines, established in 2006. The company specializes in various series of wire cutting EDM machines. In addition, the machine takes up only 42 square feet of floor space, including the machine’s filtration unit. Programmable reduced power settings eliminate wire breaks on lead-in cutting. Automatic adjustment to power settings and feed rate improve corner accuracy. The EDM machine also features an AWT (Auto Wire Threading) that is low maintenance and highly capable.
Regarding the CNC controller, it features a Windows embedded operating system, an independently developed CNC control device, a 15” Color LCD, 64 bits industrial computer and a memory card with capacity of 2GB CF. Furthermore, it includes keyboard, mouse stand, RS-232, USB disk, network and FTP.
The discharge power supply has high speed voltage withstanding MOSFET, a modular design discharge power unit and real-time sparking pulse control.
S-EW3’s features a 5-axis linear guide way, 5-axes AC servo motors, ball screws (grade X/Y C1, U/V C3, Z C5), high stability mechanical structure and a reliable AWT system.
Optional features available are a 3 phase transformer, short message service, remote monitor system, jumbo feeder, a wire guide on top and one on the bottom.
A new “E” learning training software enhances the customer’s S-EW3 experience.
For more information, please contact:
Ed Beaumont
President
BEAUMONT MACHINE
4001 Borman Drive
Batavia, OH 45103
Phone: 513-701-0421
Web: www.beaumontmachine.com
Email: beaumach@msn.com
The company’s marketing manager prepares his August trip to Peru with Peruvian archeologist to collect scan data
Jason Kleinhenz, the Exact Metrology marketing manager and a degreed engineer, is getting ready to visit Peru from August 5 to August 19. He will be assisting archeologist and teacher, Daniel Fernandez-Davila and a group of 12. Kleinhenz wants to collect scan data with the Artec scanners (sponsored and supplied by Artec) of ancient artifacts and up to three monoliths. Once the data is processed, it will be given to the local museum and the local area communities.
Daniel Fernandez-Davila teaches in Massachusetts. For 21 years, he has explored one of the most remote areas of Peru, the north high jungle of the Chacapoyas. Besides students from Wayland, Massachusetts and Kleinhenz, the team lead by Fernandez-Davila includes Rachel Lorenc and Nick Ciorogan. Lorenc is a research assistant at John Hopkins University. Ciorogan is a filmmaker working on the film “My Teacher,” which talks about how Fernandez-Davila is making an impact with his visits to Peru.
In addition to exposing students to the culture of Peru, Fernandez-Davila challenges them emotionally, mentally and physically by introducing them to a completely different way of life. As part of the trip, the team will perform philanthropic work for rural communities such as: dental work and providing school supplies.
Fernandez-Davila is excited to use Exact Metrology’s 3D scanners to preserve Peru’s archeological treasures. In the past, he could only take one photo and this worried him because the moisture of the jungle would destroy everything. This year, he decided to take action and start small. His goal is to 3D scan one large monolith with carvings. There are two other monoliths in the area that must be scanned before the rain erodes the carvings. In order to best achieve this, Fernandez-Davila declared that “I am hiring an engineer from Exact Metrology who will accompany me and digitalize the whole monolith and reveal its complex carvings with 3D portable deep laser scanners. This will allow me to create images and drawings I can give to the local museum of Leymebamba and I will also share them with the communities of peasants around the monolith.”
Exact Metrology is an ISO 9001:2008, AS9100, FFL and ITAR Certified Company.
Exact Metrology, with facilities in Cincinnati and Milwaukee and affiliated offices throughout the Midwest, is a comprehensive metrology services provider, offering customers 3D scanning, reverse engineering, quality inspection, product development CT scanning and services and 2D drawings. The company also provides turnkey metrology solutions, including equipment sales and lease/rental arrangements.
Stay tuned for more on this story and for additional information, please contact:
Steve Young
Exact Metrology, Inc.
11575 Goldcoast Drive
Cincinnati, OH 45249
Phone: 614-264-8587
Local: 513-831-6620
www.exactmetrology.com
stevey@exactmetrology.com
