(847) 934-4500

Contact us today:

Tag Archives: shelf oven

550°F Shelf Oven from Grieve

Grieve Shelf OvenNo. 859 is a 550°F (288°C), shelf oven from Grieve, currently used for drying powdered resin in trays at the customer’s facility. Workspace dimensions of this oven measure 44” W x 30” D x 60” H. 12 KW are installed in Nichrome wire heating elements, while a 1000 CFM, 1-HP recirculating blower provides horizontal airflow to the workload.

This Grieve oven has 4” insulated walls, Type 430 stainless steel interior and 4 independent doors for access to workspace, each opening 20-1/2” wide x 28-1/2” high. Features include 32 trays 19” wide x 29” long x 2-1/2” deep, a weekly timer to start and stop oven and a digital timer for each compartment with button and pilot light to indicate end of cycle.

Controls on the No. 859 include a digital indicating temperature controller, manual reset excess temperature controller with separate contactors, recirculating blower air flow safety switch and a 10” diameter circular chart recorder.


For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, Illinois 60073-2835
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese.

Continue reading

550ºF Shelf Oven

No. 834 is an electrically-heated 550°F(~287.78°C) shelf oven from Grieve, currently used for drying trays of ore samples. 12 KW are installed in Nichrome wire heating elements. Workspace dimensions are 50” wide x 30” deep x 54” high.

The unit has 4” insulated walls and a Type 430 stainless steel interior. A 1000 CFM, 1-HP recirculating blower provides horizontal airflow to the workload. Stainless steel pans are held by three tiers of seventeen shelf supports on a 3” vertical center.

Controls onboard No. 834 include a digital indicating temperature controller, recirculating blower airflow safety switch and a manual reset excess temperature controller with separate contactors.

For more information, please contact: THE GRIEVE CORPORATION, 500 Hart Road, Round Lake, Illinois 60073-2835 USA.  Phone: (847) 546-8225.  Fax: (847) 546-9210.  Web: www.grievecorp.com. Email: sales@grievecorp.com. Attention: Frank Calabrese.

NEWS RELEASE:  THE GRIEVE CORPORATION

Agency contact:  Tim Daro 847-934-4500

Continue reading

250°F Electric Shelf Oven

926 GrieveNo. 926 is an electrically-heated, 250°F shelf oven and environmental test chamber from Grieve, currently used for age testing electrical/electronic components. 12kW installed in Nichrome wire elements provide heat to the load.  Workspace dimensions measure 68” W x 30”D x 66” H.  A 1000 CFM, 1 HP recirculating blower provides horizontal airflow.

This Grieve shelf oven features 4”insulated walls, aluminized steel interior and exterior, plus a 20” W x 56” H double-pane Lexan window in each of the unit’s two doors.

No. 926 also includes a disposable fresh air filter, digital indicating temperature controller, manual reset excess temperature controller with separate contactors, recirculating blow airflow safety switch and a remote control panel, shown separate in the photo provided here.

For more information, please contact:

THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL  60073-2898
Phone:  (847) 546-8225
Fax:  (847) 546-9210
Web:  www.grievecorp.com
Email:  sales@grievecorp.com
Attention:  Frank Calabrese, VP

Continue reading

350°F Gas-fired Shelf Oven from Grieve

918 GrieveNo. 918 is a gas-heated, 350°F shelf oven from Grieve, currently used for a variety of lower temperature heat processing operations at a customer’s facility.    Workspace dimensions measure 68”W x 30”D x 66”H.  100,000 BTU/hr. are installed in a modulating natural gas burner, while a 1000 CFM, 1-HP recirculating blower provides horizontal airflow to the workload.

This Grieve shelf oven features an aluminized steel exterior and Type 430 stainless steel interior with 4” thick insulated walls, integrally welded construction and silicone rubber door gasket.

No. 918 has onboard all safety devices required by IRI, FM and NFPA Standard 86 for gas-heated equipment, including a 325 CFM, 1/3-HP powered forced exhauster.  In addition, a digital indicating temperature controller displays actual and set point values.

Two nickel-plated wire shelves are included with channel shelf supports to prevent tipping.

For more information, please contact:

THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL  60073-2898
Phone:  (847) 546-8225
Fax:  (847) 546-9210
Web:  www.grievecorp.com
Email:  sales@grievecorp.com
Attention:  Frank Calabrese, VP

Continue reading