Contact us today:
(847) 934-4500
tdaro@bernardandcompany.com
Contact us today:
(847) 934-4500
tdaro@bernardandcompany.com
No. 900 is a gas-heated 350°F(~176.67°C) floor level cabinet oven from Grieve, currently used for drying polycarbonate plastics. 100,000 BTU/HR is installed in a modulating natural gas burner and workspace dimensions are 36” wide x 36” deep x 60” high.
The oven has 4” insulated walls and a 750 CFM, 3/4-HP recirculating blower provides vertical airflow to the oven. Safety equipment, such as a 325 CFM, 1/3-HP powered force exhauster, is included as required by IRI, FM and the National Fire Protection Association Standard 86 for gas-heated equipment. The oven also features shelf supports on 3” vertical centers that are rated 200 lb. per level for a 1000 lb. maximum oven load.
Controls onboard No. 900 include a recirculating blower airflow safety switch, digital indicating temperature controller and a manual reset excess temperature controller with separate contactors.
For more information, please contact: THE GRIEVE CORPORATION, 500 Hart
Road, Round Lake, Illinois 60073-2835 USA. Phone: (847) 546-8225. Fax: (847) 546-
9210. Web: www.grievecorp.com. Email: sales@grievecorp.com. Attention: Frank Calabrese.
Agency Info: Tim Daro 847-934-4500
Continue reading
No. 905 is an electrically-heated 1200°F(~648.89°C) high temperature walk-in oven from Grieve, currently used for heat treating. 120 KW are installed in Incoloy sheathed tubular heating elements. Workspace dimensions are 48” wide x 180” deep x 72” high.
The oven has 10” thick insulated walls comprised of 2” of 1900°F block and 8” of 10 lb/cf density rockwool, an aluminized steel exterior and a Type 304, 2B finish stainless steel interior. A 12,500 CFM, 10-HP recirculating blower provides universal front to rear airflow to the unit.
The unit is also equipped with a 7” insulated floor with truck wheel guide tracks and a flatbed loading truck with a 5000 lb capacity. The external frame works with lifting eyes to allow this 18,000 lb oven to be moved by crane. It also features inner and outer gaskets; the inner gasket seals directly against the door plug and the outer gasket seals directly against the front face of the oven.
Controls onboard No. 905 include a digital programming temperature controller, free standing remote control panel, manual reset excess temperature controller with separate contactors, SCR power controller, strip chart recorder and recirculating blower airflow safety switch.
For more information, please contact: THE GRIEVE CORPORATION, 500 Hart
Road, Round Lake, Illinois 60073-2835 USA. Phone: (847) 546-8225. Fax: (847) 546-9210. Web: www.grievecorp.com. Email: sales@grievecorp.com. Attention: Frank Calabrese.
Agency Contact: Tim Daro: 847-934-4500
Continue reading
No. 874 is an electrically-heated 650°F(~343.3°C) indexing chain conveyor oven from Grieve, currently used for processing pallets of PVC parts on mandrels. 40 KW are installed in Incoloy sheathed tubular heating elements. Workspace dimensions are 42” wide x 84” deep x 15” high.
The oven has 5” insulated walls and an aluminized steel interior and exterior. It features three zones: 2’ long open belt loading zone, 7’ long insulated heat zone with recirculated airflow and 4’ long open unloading zone. The mandrels holding product move through the oven on two strands of 60 pitch roller chain on 35” centers, powered by a ¼ HP motor drive with fixed speed of 32 inches per minute.
A 4200 CFM, 3-HP recirculating blower provides vertical downward airflow to the workload, while a 325 CFM powered forced exhauster is also onboard. Motor operated vertical lift doors are provided at each end of the oven.
Controls onboard No. 874 include SCR power controller and fused disconnect switch. A PLC controls temperature and conveyor indexing.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 829 is an electrically-heated 250°F(~121.11°C) belt conveyor oven from Grieve, currently used for curing epoxy on metal and nylon filter assemblies. 40 K are installed in Incoloy sheathed tubular heating elements. Workspace dimensions are 30” wide x 10’ deep x 15” high.
The oven has 4” insulated walls and an aluminized steel interior and exterior. A 4200 CFM, 3-HP recirculating blower provides vertical upward and downward airflow to the unit. The oven has three zones: a 2’ long open belt loading zone, 10’ long insulated heat zone with recirculated airflow and a 2’ long open unloading zone. The product is moved through the oven on a 24” wide, 1” x 1” Type 304 stainless steel flatwire conveyor belt with a 1/4 HP motor drive, with variable speed from 0.3 to 6 feet per minute.
Controls onboard No. 829 include a digital indicating temperature controller, manual reset excess temperature controller with separate contactors, SCR power controller, fused disconnect switch and a recirculating blower airflow safety switch.
For more information, please contact: THE GRIEVE CORPORATION, 500 Hart Road, Round Lake, Illinois 60073-2835 USA. Phone: (847) 546-8225. Fax: (847) 546-9210. Web: www.grievecorp.com. Email: sales@grievecorp.com. Attention: Frank Calabrese.
Continue readingNo. 948 is an indirect gas-heated 650°F(~343.3°C) walk-in oven from Grieve, currently used for evaporating water from plastic. 500,000 BTU/HR are installed in a modulating natural gas burner 
that fires into an alloy radiant tube. Workspace dimensions are 60” wide x 72” deep x 72” high.
The oven has a top-mounted heat chamber, Type 304, 2B finish stainless steel interior and an aluminized steel exterior, with 5” thick insulated walls. The insulated floor is lined with truck wheel guide tracks. A 6000 CFM, 5-HP recirculating blower provides horizontal airflow to the workload. The oven is equipped with a 1500 CFM stainless steel powered forced exhauster with motorized dampers on the intake and exhaust for accelerated cooling. For protection, safety equipment is included as required by IRI, FM and National Fire Protection Association Standard 86 for gas-heated equipment.
Controls onboard No. 948 include a digital programming temperature controller, manual reset excess temperature controller with separate contactors, 10” diameter circular chart recorder and a recirculating blower safety switch.
For more information, please contact: THE GRIEVE CORPORATION, 500 Hart Road, Round Lake, Illinois 60073-2835 USA. Phone: (847) 546-8225. Fax: (847) 546-9210. Web: www.grievecorp.com. Email: sales@grievecorp.com. Attention: Frank Calabrese.
Continue readingNo. 863 is an electrically-heated 1400°F(~760°C) box furnace from Grieve, currently used for preheating molds. 52 KW are installed in nickel chrome wire coils supported by a stainless steel frame. A
heat resisting alloy recirculating blower is powered by a 7½ HP motor with a V-belt drive. The blower provides upward airflow to the oven. Workspace dimensions are 30” wide x 48” deep x 30” high.
The unit has 7” thick insulated walls with stainless steel covers. The oven was specially built with inert atmosphere construction. This consists of a continuously welded outer shell, high temperature door gasket, sealed heater terminal boxes, inert atmosphere inlet and inert atmosphere outlet.
Controls onboard No. 863 include a motor-operated vertical lift door and a 4-point strip chart recorder.
For more information, please contact: THE GRIEVE CORPORATION, 500 Hart Road, Round Lake, Illinois 60073-2835 USA. Phone: (847) 546-8225. Fax: (847) 546-9210. Web:www.grievecorp.com. Email: sales@grievecorp.com. Attention: Frank Calabrese.
Continue readingNo. 983 is an electrically-heated 550°F(~287.78°C) bench oven from Grieve, currently used for curing medical instruments. 3KW are installed in Incoloy sheathed tubular heating elements. 
Workspace dimensions are 26” wide x 22” deep x 16” high.
The oven has 3” insulated walls, a Type 304, 2B finish stainless steel interior and a #4 brushed finish stainless steel exterior. Two 13” x 4” access slots are equipped with insulated covers on the rear wall of the oven. An 8” x 10” double-pane Pyrex window is used for viewing the oven chamber. An interior oven light is also provided.
Controls onboard No. 983 include recording and programming temperature controllers and a recirculating blower for this oven.
For more information, please contact: THE GRIEVE CORPORATION, 500 Hart
Road, Round Lake, Illinois 60073-2835 USA. Phone: (847) 546-8225. Fax: (847) 546-
9210. Web: www.grievecorp.com. Email: sales@grievecorp.com. Attention: Frank
Calabrese.
-0-
Photo enclosed
No. 834 is an electrically-heated 550°F(~287.78°C) shelf oven from Grieve, currently used for drying trays of ore samples. 12 KW are installed in Nichrome wire heating elements. Workspace dimensions are 50” wide x 30” deep x 54” high.
The unit has 4” insulated walls and a Type 430 stainless steel interior. A 1000 CFM, 1-HP recirculating blower provides horizontal airflow to the workload. Stainless steel pans are held by three tiers of seventeen shelf supports on a 3” vertical center.
Controls onboard No. 834 include a digital indicating temperature controller, recirculating blower airflow safety switch and a manual reset excess temperature controller with separate contactors.
For more information, please contact: THE GRIEVE CORPORATION, 500 Hart Road, Round Lake, Illinois 60073-2835 USA. Phone: (847) 546-8225. Fax: (847) 546-9210. Web: www.grievecorp.com. Email: sales@grievecorp.com. Attention: Frank Calabrese.
NEWS RELEASE: THE GRIEVE CORPORATION
Agency contact: Tim Daro 847-934-4500
Continue reading
No. 961 is an electrically-heated 350°F(~176.67°C) vertical conveyor oven from Grieve, currently used for preheating baskets of steel parts. 30 KW are installed in Incoloy sheathed tubular heating elements. Workspace dimensions are 30” wide x 62” deep x 118” high.
The unit has 4” insulated walls and an aluminized steel interior and exterior. It is also equipped with a removable top-mounted heat chamber (shown on floor in photo) and a motor-operated vertical lift door.
A 4200 CFM, 3-HP recirculating blower provides vertical upward airflow to the workload. Ten 200 lb. capacity carriers with roller surfaces, 31” wide x 14” long, are supported on each side by a heavy-duty roller chain. The carriers are driven through the conveyor by a 3/4-HP drive motor controlled by a variable frequency drive. Fifteen loading baskets are included with the oven. A loading table with rollers lines up with the rollers on the carriers and a latch holds the baskets in place on the carrier.
Controls onboard No. 961 include a digital temperature controller, recirculating blower airflow safety switch, 10” diameter circular chart recorder and a manual reset excess temperature controller with separate contactors.
For more information, please contact: THE GRIEVE CORPORATION, 500 Hart
Road, Round Lake, Illinois 60073-2835 USA. Phone: (847) 546-8225. Fax: (847) 546-
9210. Web: www.grievecorp.com. Email: sales@grievecorp.com. Attention: Frank
Calabrese.
No. 871 is an electrically-heated 2000°F(~1093.3°C) gas-heated box furnace from Grieve, currently used for heat treating and high temperature testing. 650,000 BTU/HR are installed in three modulating natural gas burners with a floor mounted combustion air blower. Workspace dimensions are 30” wide x 48” deep x 30” high.
The unit has 7” insulated walls comprised of 5” of 2300°F ceramic fiber and 2” of 1700°F block insulation. The 6½” floor insulation is made of 4½” of 2300°F firebrick and 2” of 1900°F block insulation. The plate hearth is made of firebrick and is supported by firebrick piers.
Controls onboard No. 871 include a Partlow MRC 7000 recording and programming temperature controller and an electrically-operated vertical lift door.
For more information, please contact: THE GRIEVE CORPORATION, 500 Hart Road, Round Lake, Illinois 60073-2835 USA. Phone: (847) 546-8225. Fax: (847) 546-9210.
Web: www.grievecorp.com. Email: sales@grievecorp.com. Attention: Frank Calabrese.
Continue reading