Contact us today:
(847) 934-4500
tdaro@bernardandcompany.com
Contact us today:
(847) 934-4500
tdaro@bernardandcompany.com
No. 832 is a 350OF electrically-heated belt conveyor oven from Grieve, currently used to cure an epoxy resin bond between a plastic frame and a glass mirror panel at a customer’s production facility.
Workspace on this oven measures 30” wide x 120” deep x 15” high. At each end of the workspace, an 18” open belt zone is provided for loading and unloading.
18KW installed in Nichrome wire heating elements heats the workspace, where a 4100 CFM, 3HP recirculating blower provides downward vertical airflow to the load. 4” insulated walls are built into No. 832, which features an aluminized steel interior and exterior.
The 24” wide Chemglas 5×5 mesh fiberglass fabric conveyor belt coated with Teflon is powered by a ¼-HP motor belt drive with variable speeds from 1.5 to 30 ipm. A belt tracking system is on-board, consisting of photoelectric eyes to sense belt position and shift a pneumatically operated steering roller.
A digital indicating temperature controller, manual reset excess temperature controller with separate contactors and a recirculating blower airflow safety switch are all included on this oven. A built-in side access door allows service to the workspace.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 833 is a standard 500oF gas-fired walk-in oven from Grieve, currently used to cure adhesive bonds between glass and plastic surfaces on products manufactured at a customer’s facility.
Workspace in this oven measures 6’ wide x 12’ deep x 6’6” high. A 600,000 BTU/HR modulating natural gas burner provides heat to this oven, while a 12,500 CFM, 10-HP recirculating blower maintains full horizontal airflow across the workload.
Safety equipment on No. 833 includes all components required by IRI, FM and NFPA Standard 86 for gas-heated equipment, including a 650 CFM, ½-HP powered forced exhauster. A digital indicating temperature controller is also installed.
This Grieve walk-in oven features an aluminized steel interior and exterior, 4” insulated walls throughout and double doors equipped with drag seals, since the customer required the doorsill be eliminated.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 912 is an electrically-heated, 500°F cabinet oven from Grieve, currently used for curing rubber parts. Workspace dimensions measure 20”W x 20”D x 26”H on this oven, which features a stainless steel exterior with #4 brushed finish and a Type 430 stainless steel interior with continuously backwelded seams and 4” thick insulated walls.
10kW installed in Incoloy-sheathed tubular heating elements and a 600 CFM, 1/2HP recirculating blower provide heated horizontal airflow across the workload.
This oven includes a 325 CFM powered forced exhauster, as well as a motorized damper on the exhaust for accelerated cooling. The oven exhaust discharges into a Type 304 stainless steel scrubber unit with brass piping. The scrubber uses recirculated water sprayed by a 1-1/2HP pump into the exhaust to remove particulates.
No. 912 has a digital indicating temperature controller, 10” diameter circular chart recorder, fused disconnect switch and eight permanently-mounted survey thermocouples connected to a jack strip on the oven’s control panel.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 916 is a gas-heated, 500°F high-capacity walk-in oven from Grieve, currently used for curing epoxy / phenolic fiber-reinforced parts inside steel molds. Workspace dimensions measure 120”W x 144”D x 84”H. 800,000 BTU/hr. are installed in a modulating natural gas burner, while a 24,500 CFM, 20HP recirculating blower provides combination airflow to the workload.
This walk-in oven features an aluminized steel exterior and interior, plus 4” thick insulated walls and a removable top-mounted heat chamber (shown removed in photo). The door sill is eliminated, as two front doors are equipped with drag seals. The oven body was designed to split into two sections for easier shipment.
No. 916 has all safety devices required by IRI, FM, and NFPA Standard 86 for gas-heated equipment, including a 325 CFM, 1/3 HP powered forced exhauster. This Grieve oven also features a digital programming temperature controller and 10” diameter circular chart recorder.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 917 is a gas-heated, 750°F vertical conveyor oven from Grieve, currently used for sintering Teflon tubes. Workspace dimensions measure 24”W x 26”D x 53”H. The secondary cooling zone on this oven measures 24”W x 26”D x 54”H. 350,000 BTU/hr. are installed in a modulating natural gas burner, while a 2,000 CFM, 2-HP recirculating blower provides horizontal airflow to the workload.
29 trays, each 18” x 5”, rise vertically through load / unload zone, pass up through the oven heat and then down into the cooling zone below the oven. A 1/2-HP motor drive, variable from .05 to 9 inches per minute, moves the trays through the unit.
This Grieve vertical conveyor oven features an aluminized steel exterior and interior, plus 6” thick insulated walls. Two 12” diameter tubeaxial fans, each driven by a 3/4-HP motor, push / pull air through the cooling zone.
All safety devices required by IRI, FM and NFPA Standard 86 for gas-heated equipment are onboard this Grieve oven, including a 325 CFM, 1/3-HP powered forced exhauster. No. 917 also features a digital indicating temperature controller and 10” diameter circular chart recorder.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 918 is a gas-heated, 350°F shelf oven from Grieve, currently used for a variety of lower temperature heat processing operations at a customer’s facility. Workspace dimensions measure 68”W x 30”D x 66”H. 100,000 BTU/hr. are installed in a modulating natural gas burner, while a 1000 CFM, 1-HP recirculating blower provides horizontal airflow to the workload.
This Grieve shelf oven features an aluminized steel exterior and Type 430 stainless steel interior with 4” thick insulated walls, integrally welded construction and silicone rubber door gasket.
No. 918 has onboard all safety devices required by IRI, FM and NFPA Standard 86 for gas-heated equipment, including a 325 CFM, 1/3-HP powered forced exhauster. In addition, a digital indicating temperature controller displays actual and set point values.
Two nickel-plated wire shelves are included with channel shelf supports to prevent tipping.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 915 is a gas-fired, 650°F cabinet oven from Grieve, currently used for testing paint coupons. Workspace dimensions measure 26”W x 26”D x 38”H. 100,000 BTU/hr. are installed in a modulating natural gas burner, while a 1000 CFM, 1-HP recirculating blower provides vertical upward airflow to the workload.
This cabinet oven features an aluminized steel exterior, 6” thick insulated walls and Type 430 finish stainless steel interior. A 12”W x 8”H access hatch is installed in the main door of this oven.
Also onboard No. 915 are a digital indicating temperature controller, a top-mounted control panel and all safety devices required by IRI, FM and NFPA Standard 86 for gas-heated equipment, including a 325 CFM, 1/3-HP powered forced exhauster.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 920 is a gas-heated, 500°F walk-in oven from Grieve, currently used for curing various rubber parts. Workspace dimensions measure 52”W x 48”D x 48”H. 350,000 BTU/hr. are installed in a modulating gas burner, while a 4,200 CFM, 3-HP recirculating blower provides horizontal airflow to the workload.
This Grieve walk-in oven features a stainless steel exterior with #4 brushed finish, Type 430 stainless steel interior with continuously backwelded seam construction and 4” thick insulated walls. A top-mounted heating chamber is provided to conserve floor space, while a motorized damper on the exhaust accelerates the unit’s cooling. Oven exhaust discharges into a Type 304 stainless steel scrubber with brass piping. The scrubber uses recirculated water, sprayed by a 1-1/2-HP pump into the exhaust, to remove particulates.
Workloads are carried on the unit’s dual shelf trucks, each with channel supports on 3-1/2” centers. A transfer dolly is provided to carry two trucks and features oven-to-dolly and dolly-to-truck latches for easy loading / unloading. The oven has a 4” insulated floor with two pairs of truck wheel guide tracks built atop the floor.
No. 920 has all safety devices required by IRI, FM and NFPA Standard 86 for gas-heated equipment, including a 650 CFM, 1/2-HP powered forced exhauster. This oven also features a digital programming temperature controller, 10” diameter circular chart recorder and fused disconnect switch.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 914 is an indirect gas-heated, 650°F walk-in oven from Grieve, currently used for drying plastic molds. Workspace dimensions measure 60”W x 72”D x 72”H. This oven has 800,000 BTU/hr. installed in a modulating natural gas burner fired into an alloy radiant tube for indirect heating. A 6,000 CFM, 5-HP recirculating blower provides horizontal airflow to the workload.
This Grieve walk-in oven has an aluminized steel exterior, 5” thick insulated walls and a Type 304, 2B stainless steel interior.
A 1500 CFM powered forced exhauster, motorized dampers on the fresh air intake and exhaust for accelerated cooling, digital programming temperature controller and 10” diameter circular chart recorder are onboard.
No. 914 further features all safety devices required by IRI, FM and NFPA Standard 86 for indirect gas-heated equipment.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 911 is an electrically-heated, 500°F truck oven, currently used for paint baking. Workspace dimensions measure 39”W x 36”D x 48” H, while 30KW installed in Nichrome wire tubular heating elements and a 2,000 CFM, 2-HP recirculating blower provide heated horizontal airflow to the workload.
This truck oven features an aluminized steel exterior, 4” thick insulated walls and Type 304, 2B finish stainless steel interior with continuously backwelded seam construction. A 650 CFM powered forced exhauster, plus motorized dampers on the fresh air intake and exhaust for accelerated cooling, are also included.
Two pairs of oven truck wheel guide tracks are built on top of the 2” insulated oven floor of this Grieve unit.
A digital indicating temperature controller, strip chart recorder, SCR power controller and a 4-color tower light to indicate process status and over-temperature alarm are onboard No. 911.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP