Contact us today:
(847) 934-4500
tdaro@bernardandcompany.com
Contact us today:
(847) 934-4500
tdaro@bernardandcompany.com
No. 869 is an electrically-heated 500ºF (~260ºC) Class 100 cleanroom cabinet oven from Grieve, currently used for curing medical rubber products at the customer’s facility. Workspace dimensions of this oven measure 36”W x 36”D x 27”H. 15KW are installed in Incoloy-sheathed tubular elements to heat the unit, while a 750 CFM, 1-HP recirculating blower provides horizontal airflow across the load.
This Grieve Class 100 cleanroom cabinet oven features 4” insulated walls throughout, aluminized steel exterior, Type 304 2B stainless steel interior with continuously welded seams, exterior finished with white epoxy paint, #4 brushed finish stainless steel door cover and control panel face.
All necessary safety equipment is onboard No. 869 for handling flammable solvents, including explosion venting door hardware. A 130 CFM stainless steel powered forced exhauster, 12” x 12” x 6” thick HEPA fresh air filter with 2” prefilter and 24” x 30” x 6” thick stainless steel high-temperature HEPA recirculating filter are also featured on the unit.
This Grieve Class 100 cleanroom cabinet oven includes a programming and recording temperature controller and SCR power controller.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
Grieve Corporation introduces No. 819, a Model LD-500, standard 500ºF electric top-loading oven.
This Grieve top-loading oven features rugged construction, with an aluminized steel interior and exterior, reinforced 1/4” steel plate top, wear bars at sides of workspace, reinforced floor for 4000 lbs. loading at removable subway grate and an automatically air-operated, rear-hinged door which opens fully for easy loading via overhead material handling equipment.
Standard equipment on No. 819 includes a digital indicating temperature controller, manual reset excess temperature controller with separate heating element control contactors and a recirculating blower airflow safety switch. The UL Listed control panel is front-mounted on this oven for easy access.
All standard top loading ovens by Grieve meet the requirements of National Fire Protection Association Standard 86, Industrial Risk Insurers, Factory Mutual and OSHA standards.
This oven was entirely designed, engineered, built and fully tested by Grieve.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
This Grieve walk-in oven features 6” insulated walls throughout, Type 304 2B stainless steel interior with continuously welded seams, stainless steel exterior with #4 brushed finish and heavy-duty double front doors.
No. 941 also features a digital programming temperature controller and 10” diameter circular chart recorder onboard.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
Grieve Corporation introduces No. 815, a 500°F electric rotary hearth oven, currently in use for preheating gears at a customer’s facility.
Workspace dimensions inside this unit measure 76” wide x 76” deep x 24” high. A 72” diameter rotary hearth is constructed from angle rings with 90 1-3/8” wide x 7-3/8” long x 3-5/8” high slots to hold the workpieces on edge while processing. The hearth is driven by a 1/4 HP motor through a gear reducer with torque limiting device. The hearth indexes one position each time the loading door is opened and closed.
Two 2000 CFM, 2 HP recirculating blowers provide a vertical downward airflow over the workload. Special safety equipment for handling flammable solvents is featured on this Grieve rotary hearth oven, including a manual reset excess temperature controller, separate heating element control contactors, a 325 CFM powered exhauster, and a purge timer.
No. 815 features an aluminized steel interior and exterior, plus 4” insulated oven walls. The unit was entirely designed, engineered, built and full tested by Grieve.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
Grieve Corporation introduces No. 809, a 650°F electric drawer oven, currently in use for preheating spin packs at a customer’s facility.
Workspace dimensions inside this unit measure 54” wide x 50” deep x 66” high and are accessed by placing the workloads on two tiers of four oven drawers, each 20” x 24” x 7-1/2” and rated at 400 lbs. per drawer.
80 kW power is installed in Incoloy sheathed tubular heating elements. No. 809 features 6” insulated walls and aluminized steel interior/exterior construction. A 6000 CFM, 5 HP recirculating blower provides horizontal airflow across each side of the workspace.
A digital, microprocessor-based, thermocouple-actuated indicating temperature controller and fused disconnect switch are also included on this unit, which was entirely designed, engineered, built and fully tested by Grieve.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 956 is a gas-fired, 800ºF (~427ºC) belt conveyor oven from Grieve, currently used for preheating steel parts at the customer’s facility. Workspace dimensions measure 30”W x 108”D x 39”H. 400,000 BTU/HR are installed in a modulating natural gas burner to heat the unit, while a 4200 CFM, 3-HP recirculating blower provides vertical downward airflow across the load.
The workload travels through a 24” long open belt loading zone, 108” long insulated heat zone with recirculated airflow and a 24” long open belt unloading zone. In process, the load rides on a 24” wide, 1” x 1” stainless steel conveyor belt with ¼-HP motor drive to index the belt through the oven heat chamber.
This Grieve belt conveyor oven features 6” insulated walls throughout, aluminized steel interior and exterior, motor-operated vertical lift doors at each end of the heat chamber, plus all safety equipment required by IRI, FM and the National Fire Protection Association (NFPA) Standard 86 for gas-heated equipment, including a 325 CFM, 1/3-HP powered forced exhauster.
No. 956 also features a digital indicating temperature controller onboard.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
Grieve Corporation introduces No. 830, a 1200°F gas-heated belt conveyor oven, currently in use for preheating electric motor rotors at a customer’s location.
Workloads travel atop a 24” wide, 1” x 1” Type 304 stainless steel flatwire conveyor belt with 3/4 HP motor drive, fixed speed of 15 feet per minute, through a 54” long open belt loading zone, 105” long insulated heat zone with recirculated airflow and a 36” long open unloading zone.
800,000 BTU/HR are installed in a modulating gas burner, while a 6000 CFM, 5 HP recirculating blower provides vertical downward airflow to the workload.
No. 830 features 10” thick insulated walls, comprising 2” of 1900°F block and 8” of 10 lb./cu.ft. density rockwool insulation. This conveyor oven has an aluminized steel exterior, Type 304, 2B finish stainless steel interior, motor-operated vertical lift doors at each end of the heat zone and 1/4” plate work surfaces at each end of the oven.
All safety devices required by IRI, FM and NFPA Standard 86 for gas-heated equipment are built into this unit, including electronic flame safeguard protection, powered forced exhauster, exhauster airflow safety switch, purge timer, hi/lo gas pressure switches, manual reset main gas valve and testing device for tight closure of main gas valve.
This conveyor oven was entirely designed, engineered, built and fully tested by Grieve.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 804 is a HIGH TEMPERATURE WALK-IN OVEN for heat treating and curing paint and varnish.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 1001 comprises two electrically-heated, 500ºF (~260ºC) universal ovens from Grieve, specially modified for simultaneous operation with reduced movement by one worker at the customer’s facility, in the performance of general heat processing operations. Workspace dimensions in each oven measure 24”W x 24”D x 24”H. 5KW are installed in Nichrome wire elements to heat each unit, while a 400 CFM, 1/3-HP recirculating blower provides front-to-rear universal airflow across the load in each unit.
These Grieve universal ovens each feature 4” insulated walls throughout, aluminized stainless steel interior and exterior, motor-operated vertical lift door with foot pedal actuation and an integral leg stand.
Identical controls on each oven of No. 1001 are housed in a NEMA 12 control panel, mounted on opposite sides of the respective ovens for easy access by one individual positioned between them. The controls on each oven include an automatic door switch to shut off heat and blower motor when the door is opened, as well as a digital indicating temperature controller, manual reset excess temperature controller with separate control contactors, recirculating blower airflow safety switch and 7-day, 24-hour start-up timer.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 794 is a three-zone, electrically-heated belt conveyor oven from Grieve, currently in use curing a cast silicone rubber layer onto steel rollers. This unit has a maximum operating temperature of 500°F and a workspace of 30″ W x 96″ D x 24″ H.
The conveyor consists of an 18″ long open belt loading zone, 36″ long insulated unheated entrance vestibule, three 32″ long insulated heat zones with independent recirculated airflow and temperature control, 12″ long insulated unheated exit vestibule and 60″ long open unloading zone.
A 90 KW total heat input is installed in Nichrome wire heating elements, with 30 KW per heating zone. Three 1,000 CFM, 1 HP recirculating blowers provide vertical downward airflow to the workload.
No. 794 features aluminized steel interior and exterior, as well as 4″ thick insulated walls, a three-pen, 10″ dia. circular chart recorder and a 24″ W, 1″ x 1″ flatwire conveyor belt with 1/2 HP motor drive and variable speed from 1.5 to 4.3 inches per minute.
A customer-specified, multi-color paint finish was also supplied by Grieve on this conveyor oven.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP