(847) 934-4500

Contact us today:

Tag Archives: cleanroom cabinet oven

Class 100 Cleanroom Cabinet Oven for Curing Rubber

Class 100 cleanroom cabinet oven for curing small rubber pieces | Grieve Corporation

Class 100 cleanroom cabinet oven for curing small rubber pieces | Grieve Corporation

No. 1023 is a 550ºF, electrically-heated, Class 100 cleanroom cabinet oven from Grieve, currently used for curing small rubber pieces in rotating drums at the customer’s facility.  Workspace dimensions of this oven measure 26” W x 26” D x 60” H.  36 kW are installed in Incoloy-sheathed tubular elements to heat the oven chamber, while a 2000 CFM, 2-HP recirculating blower provides horizontal airflow to the workload.

This Grieve cleanroom cabinet oven features 6” insulated walls, Type 304, 2B stainless steel interior with ½” inside radius corners and all seams welded, ground and polished, top-mounted heat chamber, two motorized stainless steel shafts cantilevered through the rear wall of the oven with a drum coupling device to rotate the loads, four 18” diameter x 18” deep perforated stainless steel drums with internal stirring paddles and access doors on one end.    The oven also contains 24” x 24” x 6” thick HEPA fresh air filters with 2” prefilters and two 24” x 24” x 12” thick stainless steel, high-temperature HEPA recirculating filters.

No. 1023 controls include all safety equipment required for handling flammable solvents, solid state heater control relays, circuit breaker disconnect switch, automatic door switch to shut off the heaters and drum drive when the door is opened, plus a minihelic pressure gauge and validation port across each set of filters on the oven.

For more information, please contact:

THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL  60073-2898
Phone:  (847) 546-8225
Fax:  (847) 546-9210
Web:  www.grievecorp.com
Email:  sales@grievecorp.com
Attention:  Frank Calabrese, VP

Continue reading

Class 100 Cleanroom Cabinet Oven From Grieve

No. 797 is a 260ºF (127ºC), electrically-heated, Class 100 cleanroom cabinet oven from Grieve, currently used for drying coatings onto printed circuit boards at the customer’s facility.  Workspace dimensions of this oven measure 36” W x 36” D x 39” H.  20 kW are installed in Incoloy-sheathed tubular elements to heat the oven chamber, while a 1000 CFM, 1-1/2-HP recirculating blower provides horizontal airflow to the workload.

This Grieve cleanroom cabinet oven features 4” insulated walls, Type 304, 2B finish stainless steel interior with continuously back-welded seams, exterior finished with white epoxy paint, #4 brushed stainless steel door cover and control panel face, 30” x 24” x 6” thick stainless steel high-temperature HEPA recirculating filter, plus all safety equipment for handling flammable solvents, including explosion-venting door hardware.

Controls on No. 797 include a digital indicating, programming temperature controller and SCR power controller.

For more information, please contact:

THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL  60073-2898
Phone:  (847) 546-8225
Fax:  (847) 546-9210
Web:  www.grievecorp.com
Email:  sales@grievecorp.com
Attention:  Frank Calabrese, VP

Continue reading

500°F Cleanroom Cabinet Oven

No. 796 is an electrically-heated 500°F(~260°C) Class 100 cleanroom cabinet oven from Grieve, currently used for drying water from stainless steel and Teflon filter assemblies. 10 KW are installed in Incoloy sheathed tubular heating elements. Workspace dimensions are 24” wide x 36” deep x 27” high.

The unit has 4” insulated walls and a Type 304, 2B finish stainless steel interior with continuously welded seams. The exterior is finished in white epoxy paint and has a #4 brushed finish stainless steel door cover and control panel face.

A 600 CFM, 3/4-HP recirculating blower provides horizontal airflow to the oven and a 24” x 24” x 6” thick stainless steel high temperature HEPA recirculating filter helps to purify the air to the Class 100 standard. The oven is also equipped with a 12” x 12” x 6” thick HEPA fresh air filter with 2” prefilter. Safety equipment is included for handling flammable solvents, including explosion venting door hardware.

Controls onboard this Grieve cleanroom oven include a digital programming temperature controller and SCR power controller.

For more information, please contact: THE GRIEVE CORPORATION, 500 Hart Road, Round Lake, Illinois 60073-2835 USA.  Phone: (847) 546-8225.  Fax: (847) 546-9210.  Web: www.grievecorp.com. Email: sales@grievecorp.com. Attention: Frank Calabrese.

Continue reading

500°F Cleanroom Cabinet Oven

922No. 922 is an electrically-heated 500°F(~260°C) cleanroom cabinet oven from Grieve, currently used for drying precision parts in baskets at the customer’s facility. 30KW are installed in Incoloy sheathed tubular heating elements to heat the load. Workspace dimensions are 36”wide x 36” deep x 51” high.

The unit has 4” insulated walls, aluminized steel exterior, type 304, 2B finish stainless steel interior with continuously backwelded seams, while the exterior is finished in white epoxy paint with a #4 brushed finish stainless steel door cover and control panel face. The oven is also equipped with double doors and positive latching door hardware.

A 1500 CFM, 2-HP recirculating blower provides horizontal airflow to the oven and two 30” x 24” x 6” thick stainless steel high temperature HEPA recirculating filters further purify the air. The ductwork is easily removable to expose filters for inspection or replacement.

Controls onboard No. 922 include a digital indicating temperature controller, manual reset excess temperature controller with separate contactors, recirculating blower airflow safety switch and solid state contactors.

For more information, please contact:

THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL  60073-2898
Phone:  (847) 546-8225
Fax:  (847) 546-9210
Web:  www.grievecorp.com
Email:  sales@grievecorp.com
Attention:  Frank Calabrese, VP

Continue reading

500°F Class 100 Cleanroom Cabinet Oven

869 GrieveNo. 869 is an electrically-heated 500ºF (~260ºC) Class 100 cleanroom cabinet oven from Grieve, currently used for curing medical rubber products at the customer’s facility.  Workspace dimensions of this oven measure 36”W x 36”D x 27”H.  15KW are installed in Incoloy-sheathed tubular elements to heat the unit, while a 750 CFM, 1-HP recirculating blower provides horizontal airflow across the load.

This Grieve Class 100 cleanroom cabinet oven features 4” insulated walls throughout, aluminized steel exterior, Type 304 2B stainless steel interior with continuously welded seams, exterior finished with white epoxy paint, #4 brushed finish stainless steel door cover and control panel face.

All necessary safety equipment is onboard No. 869 for handling flammable solvents, including explosion venting door hardware.  A 130 CFM stainless steel powered forced exhauster, 12” x 12” x 6” thick HEPA fresh air filter with 2” prefilter and 24” x 30” x 6” thick stainless steel high-temperature HEPA recirculating filter are also featured on the unit.

This Grieve Class 100 cleanroom cabinet oven includes a programming and recording temperature controller and SCR power controller.

For more information, please contact:

THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL  60073-2898
Phone:  (847) 546-8225
Fax:  (847) 546-9210
Web:  www.grievecorp.com
Email:  sales@grievecorp.com
Attention:  Frank Calabrese, VP

Continue reading

500°F Class 100 Cleanroom Cabinet Oven

795 GrieveNo. 795 is an eletrically-heated cabinet oven from Grieve, designed for use in a Class 100 cleanroom.  It is currently being utilized for drying water from stainless steel and quartz parts.  The unit has a maximum operating temperature of 500°F and workspace dimensions of 48″ W x 27″ D x 66″ H.

A 30 KW total heat input is installed in Incoloy sheathed tubular heating elements.  A 1,500 CFM, 2 HP recirculating blower provides vertical downward airflow to the workload.

This Grieve cleanroom oven features a stainless steel exterior with #4 brushed finish, as well as a Type 304, 2B finish stainless steel interior with 1/2″ inside radius corners, seams welded, ground and polished.

A 12″ x 12″ x 6″ thick HEPA fresh air filter with 2″ prefilter and a 30″ x 24″ x 12″ thick stainless steel, high-temperature HEPA recirculating filter are provided, with a minihelic pressure gauge and DOP validation port across each filter.

Safety equipment includes a digital indicating temperature controller, manual reset excess temperature controller and SCR power controller.

No. 795 construction features 4″ insulated walls, independent double doors and twenty pairs of shelf supports with ten removable shelves included.

For more information, please contact:

THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL  60073-2898
Phone:  (847) 546-8225
Fax:  (847) 546-9210
Web:  www.grievecorp.com
Email:  sales@grievecorp.com
Attention:  Frank Calabrese, VP

Continue reading

500°F Class 100 Cleanroom Cabinet Oven

880 GrieveNo. 880 is a 500°F electric Class 100 cleanroom cabinet oven from Grieve, currently used to cure urethane, silicone and steel parts at a customer’s facility.  Workspace dimensions of this unit measure 36”W x 36”D x 51”H.

30kW installed in Incoloy sheathed tubular elements heat the workspace, while a 1500 CFM, 2-HP recirculating blower provides horizontal airflow across the workload.

This cabinet oven features a 16 ga. Type 304, 2B finish stainless steel interior with continuously backwelded seam construction.  The exterior of the oven is finished with white epoxy paint and includes a #4 brushed stainless steel door cover and control panel face.  The unit has single side-swinging doors on the front and back of the workspace for easy access, plus 4” thick insulated walls.

No. 880 also features two 30” x 24” x 6” thick stainless steel, high-temperature HEPA recirculating filters.

All safety equipment required for handling flammable solvents is onboard this oven, including explosion-venting door hardware.

For more information, please contact:

THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL  60073-2898
Phone:  (847) 546-8225
Fax:  (847) 546-9210
Web:  www.grievecorp.com
Email:  sales@grievecorp.com
Attention:  Frank Calabrese, VP

Continue reading