Contact us today:
(847) 934-4500
tdaro@bernardandcompany.com
Contact us today:
(847) 934-4500
tdaro@bernardandcompany.com
No. 1013 is an electrically-heated, 350ºF (~177ºC) cabinet oven from Grieve, currently used for curing rubber parts at the customer’s facility. Eight workspace openings with roller supported shelves each measure 36” W x 6-1/4” H x 24” D. 45 KW are installed in Incoloy-sheathed tubular heating elements, while a 7800 CFM, 5-HP recirculating blower provides horizontal airflow to the common central duct of the oven to heat the load.
This Grieve cabinet oven features 4” thick insulated walls, aluminized steel interior and exterior, top mounted heat chamber with access doors and 200 lb. capacity shelves that extend 24” in front of the oven for easier loading.
No. 1013 is also equipped with a digital indicating temperature controller, manual reset excess temperature controller with separate contactors, recirculating blower airflow safety switch and all required safety equipment for handling flammable solvents, including explosion venting door hardware. A programmable timer, interlocked to each door via a proximity switch, plus green lights for each door to indicate when curing time is completed are also onboard this oven.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 1003 is a gas-fired, 500ºF (~260ºC) walk-in oven from Grieve, currently used for drying molded fiber parts at the customer’s facility. Workspace dimensions in this oven measure 48” W x 48” D x 72” H. 800,000 BTU/HR are installed in a modulating natural gas burner to heat the oven chamber, while a 4200 CFM, 3-HP recirculating blower provides vertical upward airflow from a duct beneath the loading truck to the workload.
This Grieve walk-in oven features 4” thick insulated walls, aluminized steel exterior, Type 304, 2B finish stainless steel interior with continuously welded seams and insulated floor with integral truck wheel guide tracks.
No. 1003 has all safety equipment onboard to process flammable solvents, as required by IRI, FM and National Fire Protection Association Standard 86 for gas-heated equipment, including a 975 CFM powered forced exhauster and purge timer.
Additionally, controls on this Grieve walk-in oven include a digital programming temperature controller, digital shut down timer with audible alarm, fused disconnect switch and 8-point internal thermocouple jack panel wired to the jack panel on the face of the control panel.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 995 is an electrically-heated, 1250ºF (~670ºC) high-temperature cabinet oven from Grieve, currently used for preheating steel forgings at the customer’s facility. Workspace dimensions in this oven measure 20” W x 40” D x 20” H. 60 KW are installed in Incoloy-sheathed tubular elements to heat the oven chamber, while a 2000 CFM, 2HP recirculating blower provides horizontal airflow to the workload.
Specially designed to handle high-temperature operation, this Grieve cabinet oven features 10” thick insulated walls, comprising 2” of 1900ºF block and 8” of 10 lb./cf density rockwool, plus Type 304, 2B stainless steel interior, motor-operated vertical lift door and alloy roller rails at the workspace floor level, rated for 1500 lb. loading.
No. 995 is built to NEMA 12 electrical standards and is equipped with SCR power control.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
Grieve Corporation introduces Model VA-500, a standard 500ºF electric cabinet oven, which features full vertical-up air flow. This unit is specifically designed for workloads where heated air must pass upward through the load – such as open-ended cylinders or hanging parts.
Workspace dimensions inside this unit measure 26” wide x 26” deep x 38” high. 6.6 kW power is installed in Nichrome wire heating elements, while a 700 CFM, 1/2 HP recirculating blower provides vertical upward airflow to the workload.
No. 828 has 4” thick insulated walls, an aluminized exterior, Type 430 stainless steel interior, 12 shelf supports on 3” centers, two (2) standard nickel plated wire shelves with 200 lb. capacity each and a heavy-duty door with explosion-venting latches and a high-temperature door gasket with stainless steel spring insert.
Standard equipment on this Grieve cabinet oven include a digital indicating temperature controller, manual reset excess temperature controller with separate heating element control contactors and recirculating blower airflow safety switch. This unit also meets the requirements of National Fire Protection Association Standard 86, Industrial Risk Insurers, Factory Mutual and OSHA Standards, as do all standard Grieve cabinet ovens.
This unit was completely designed, engineered, built and fully tested by Grieve.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 1000 is a gas-fired, 500ºF (~260ºC) walk-in oven from Grieve, specially modified for overhead crane loading at the customer’s facility, in the performance of general heat processing operations. Workspace dimensions of this oven measure 81”W x 14’D x 12’H. 600,000 BTU are installed in a modulating natural gas burner to heat the unit, while a 17,500 CFM, 15-HP recirculating blower provides combination horizontal/vertical airflow to the load.
This unique Grieve walk-in oven features 4” insulated walls throughout, aluminized steel interior and exterior, air-operated crane access door atop the oven, plus all safety equipment required by IRI, FM and NFPA Standard 86 for gas-heated equipment, including a 1500 CFM powered forced exhauster.
Controls on No. 1000 include a digital programming temperature controller.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 1002 is an electrically-heated, 500ºF (~260ºC) cabinet oven from Grieve, currently used for various test procedures in the customer’s laboratory. 8KW are installed in Incoloy sheathed tubular elements to heat the unit, while a 400CFM, 1/3-HP recirculating blower provides horizontal airflow across the load.
This Grieve oven features 4” insulated walls throughout, Type 304, 2B stainless steel interior with continuously backwelded seam construction, stainless steel exterior with #4 brushed finish, heavy-duty door and door frame, three nickel-plated wire shelves and adjustable patented opposed louvers on full coverage supply and return ductwork.
No. 1002 is equipped with all safety equipment for handling flammable solvents, including explosion-venting door hardware, powered forced exhauster airflow safety switch, purge timer and digital indicating temperature controller.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 926 is an electrically-heated, 250°F shelf oven and environmental test chamber from Grieve, currently used for age testing electrical/electronic components. 12kW installed in Nichrome wire elements provide heat to the load. Workspace dimensions measure 68” W x 30”D x 66” H. A 1000 CFM, 1 HP recirculating blower provides horizontal airflow.
This Grieve shelf oven features 4”insulated walls, aluminized steel interior and exterior, plus a 20” W x 56” H double-pane Lexan window in each of the unit’s two doors.
No. 926 also includes a disposable fresh air filter, digital indicating temperature controller, manual reset excess temperature controller with separate contactors, recirculating blow airflow safety switch and a remote control panel, shown separate in the photo provided here.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 799 is an electrically-heated 1382°F(~750°C) inert atmosphere cabinet oven from Grieve, currently used for processing ceramic components, prior to assembly. 60KW are installed in alloy wire high temperature plug heaters. Workspace dimensions are 38” wide x 38” deep x 50” high.
The unit has 12” thick insulated walls comprised of 2” of 1900°F block and 10” of 10lb. density rockwool. The oven has a type 304, 2B finish stainless steel interior and is equipped with a solenoid operated door lock.
A 3000 CFM, 3-HP alloy recirculating blower provides horizontal airflow to the oven and a 325 CFM cooling blower pulls room air through the air jacket on the inner oven for additional cooling.
An inert atmosphere oven requires a pressure regulator, flow meter, pressure gauge and internal high temperature gasket. Also needed was a bellow type seal in the doorway throat area, 1/2” thick silicone rubber atmosphere seal and blower shaft seal. Positive latching door hardware, adjustable offset door hinges and an outlet with pressure relief were added as well. To keep gas from escaping, the interior seams were welded gas-tight and all wall penetrations fitted with compression fittings.
No. 918 is a gas-heated, 350°F shelf oven from Grieve, currently used for a variety of lower temperature heat processing operations at a customer’s facility. Workspace dimensions measure 68”W x 30”D x 66”H. 100,000 BTU/hr. are installed in a modulating natural gas burner, while a 1000 CFM, 1-HP recirculating blower provides horizontal airflow to the workload.
This Grieve shelf oven features an aluminized steel exterior and Type 430 stainless steel interior with 4” thick insulated walls, integrally welded construction and silicone rubber door gasket.
No. 918 has onboard all safety devices required by IRI, FM and NFPA Standard 86 for gas-heated equipment, including a 325 CFM, 1/3-HP powered forced exhauster. In addition, a digital indicating temperature controller displays actual and set point values.
Two nickel-plated wire shelves are included with channel shelf supports to prevent tipping.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP