Contact us today:
(847) 934-4500
tdaro@bernardandcompany.com
Contact us today:
(847) 934-4500
tdaro@bernardandcompany.com
No. 965 is a 1350ºF (~733ºC) electrically-heated cabinet oven from Grieve, currently used heat treating titanium at the customer’s facility. Workspace of this unit measures 24”W x 24”D x 24”H. 30KW are installed in nickel chrome wire coils, supported by a stainless steel frame, to heat the oven, while a 1300CFM, 1-1/2HP alloy recirculating blower provides horizontal airflow to the workload.
This Grieve cabinet oven features 11” thick insulated walls, comprising 2” of 1900ºF (~1038ºC) block and 9” of 10 lb/cf density rockwool insulation, as well as an aluminized steel exterior, Type 304 2B finish stainless steel interior, plus inner and outer door gaskets, with the inner gasket sealing directly against the door plug and the outer gasket sealing directly against the face of the oven for optimum seal integrity.
Oven controls on No. 965 include a digital indicating temperature controller, manual reset excess temperature controller with separate contactors, recirculating blower airflow safety switch, 10” diameter circular chart temperature recorder, plus an an SCR power controller and fused disconnect switch.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 802 is an electrically-heated, large capacity top-loading oven from Grieve, currently in use drying water from spinnerette packs. This unit has a maximum operating temperature of 500°F and workspace dimensions of 13’6” W x 28” L x 24” D.
A 100 KW heat input is installed in Incoloy sheathed tubular heating elements, while a 4,200 CFM, 3 HP recirculating blower provides horizontal front to back airflow across the load.
This large capacity Grieve oven features 4” insulated walls throughout, an air-operated door, reinforced 1/4” steel plate top, wear bars at all sides of the workspace and a reinforced floor for 3000 lb. loading at the removable subway grating.
No. 802 also includes a digital indicating temperature controller, manual reset excess temperature controller with separate contactors and a cycle timer.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 970 is a 500ºF (~260ºC) electrically-heated, Class 100 cleanroom oven from Grieve, currently used for a variety of heat processings such as sterilizing, depyrogenation, curing and drying workloads at the customer’s facility. Workspace of this unit measures 36”W x 42”D x 66”H. 30KW are installed in Incoloy-sheathed tubular elements to heat the oven, while a 2400CFM, 3-HP recirculating blower provides horizontal airflow to the workload.
This Grieve cleanroom oven features 4” thick insulated walls throughout, aluminized steel exterior, Type 304 2B-finish stainless steel interior with continuously backwelded seams, exterior finished with white epoxy paint, #4 brushed finish stainless steel door and control panel face. The unit includes a 4” insulated floor with removable truck wheel guide tracks.
In addition, No. 970 has a 325CFM stainless steel powered forced exhauster, two 24” x 30” x 12” thick stainless steel high-temperature HEPA recirculating air filters, digital indicating temperature controller, manual reset excess temperature controller with separate contactors, recirculating blower airflow safety switch and a 10” diameter circular chart recording temperature controller.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 955 is a 500ºF (~260ºC) electrically-heated, top-loading oven from Grieve, currently used for testing electronic components at the customer’s facility. Workspace of this unit measures 312”W x 24”D x 24”H. 70KW are installed in Nichrome wire elements to heat the oven, while 8000CFM total from a series of four 2HP recirculating blowers provide horizontal rear to front airflow to the workload.
This unique top-loading oven has 4” insulated walls throughout, aluminized steel exterior and interior, a motor-operated rear-hinged door opening the top and front of the oven chamber and a workspace floor reinforced for 7200 lbs. loading onto the 1/4” steel plate surface.
No. 955 features a digital programming temperature controller with two channels providing two independent zones of temperature control. The oven also has onboard two manual reset excess temperature controllers with separate contactors and four recirculating blower airflow safety switches.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 803 is an electrically-heated, two-zone walk-in oven, currently used in tandem with a customer’s conveyor system for heating 27′ long pallets of vacuum laminations. This Grieve unit has a maximum operating temperature of 650°F and workspace dimensions of 6′ W x 28′ D (in two 14′ zones) x 5′ H.
A 100 KW heat input is installed in each zone in Incoloy sheathed tubular heating elements, while a 12,500 CFM, 10 HP recirculating blower provides horizontal airflow to the workload in each zone. A top-mounted heat chamber is located above each heating zone, as well, on this Grieve oven.
No. 803 features an aluminized steel interior, motor-operated vertical lift door with foot switch at each end of the oven and a reinforced floor and support stand to raise the oven floor to meet the customer’s conveyor height.
Controls on this Grieve oven include a digital indicating temperature controller and manual reset excess temperature controller for each zone, as well as a two-pen circular chart recorder.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No.942 is a gas-fired, 350ºF (177ºC) walk-in batch oven, currently used for curing epoxy at the customer’s facility. Workspace dimensions measure 84” W x 144” D x 108” H. 400,000 BTU/HR are installed in a modulating natural gas burner to heat the unit, while 12,000 CFM total from two (2) 5 HP recirculating blowers provide combination airflow to the workloads.
This large-capacity Grieve walk-in batch oven features 4” insulated walls throughout, aluminized steel interior and exterior, three independent doors for workspace access on the front of the oven, standard double doors on the rear of the oven, 2” insulated floor with three (3) pairs of built-in truck wheel guide tracks and integral 6” I-beam supports to raise the oven above the factory floor level.
All safety equipment required by IRI, FM and National Fire Protection Association Standard 86 for gas-heated equipment are onboard No. 942, including a 325 CFM, 1/3 HP powered forced exhauster for quick purge and cool down, dampers on the intake and exhaust for accelerated cooling, as well as a 10” diameter circular chart recorder and digital programming temperature controller.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 805 is a 1250ºF (~677ºC) electric, inert atmosphere batch cabinet oven from Grieve, currently used for annealing copper motor coil parts at the customer’s facility.
Workspace of this unit measures 36” W x 96” D x 36” H. 60KW are installed in Incoloy sheathed tubular elements to heat the oven, while a 4,000 CFM, 3HP recirculating blower provides universal airflow to the workload.
This Grieve cabinet oven has 10” insulated walls throughout, comprising 2” of 1900ºF block and 8” of 10 lb. density rockwool, as well as a 16 ga. stainless steel interior and integral oven leg stand. A 975 CFM blower is onboard to pull air through the air jacket of the inner oven for cooling. The oven is constructed to JIC/NEMA 12 electrical standards.
As an inert atmosphere oven construction, No. 805 also includes a pressure regulator, flow meter, pressure gauge, internal high temperature gasket, bellows type seal in the doorway, 1/2” thick cellular silicone rubber atmosphere seal, blower shaft seal, positive latching door hardware, adjustable offset door hinges, outlet with pressure relief, interior seams welded gas-tight and all wall penetrations equipped with compression fittings.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 993 is a 500ºF (~260ºC) electric walk-in batch oven from Grieve, currently used for curing various elastomeric and thermoplastic parts at the customer’s facility. Workspace of this unit measures 48” W x 96” D x 72” H. 45KW are installed in Incoloy sheathed tubular elements to heat the oven, while a 6,000CFM, 5HP recirculating blower provides horizontal airflow across the workload.
This Grieve walk-in oven has 4” insulated walls throughout, aluminized steel exterior and interior, 2” insulated floor with built-in truck wheel guide tracks, exhaust hood over the oven doors equipped with an 18” diameter tubeaxial fan driven by a 3/4HP motor and an integral door switch to start the hood fan when the doors are opened, then shut down the fan when the doors are closed.
No. 993 also provides many added safety features, including a 325CFM powered forced exhauster, digital indicating temperature controller, manual reset excess temperature controller with separate contactors, recirculating airflow safety switch, 10” diameter circular chart recorder and a 30-hour oven shutdown timer.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 998 is a 450ºF (~232ºC) gas-fired, vertical conveyor oven from Grieve, currently used for curing rubber parts at the customer’s facility. Workspace of this unit measures 68”W x 74”D x 121”H. 400,000 BTU/HR are installed in a modulating natural gas burner to heat the oven, while a 6,000 CFM, 5HP recirculating blower provides a combination airflow to the workload.
This vertical conveyor oven has 4” insulated walls throughout, stainless steel exterior with #4 brushed finish, Type 304, 2B stainless steel interior with continuously backwelded seams, two side doors for access to the workspace and loading/unloading positions on each side to accept the customer’s fixtures, with a counterweight to hold the fixtures horizontal while passing upward through the oven chamber. The unit was constructed to be split into two sections for shipment.
The vertical conveyor on No. 998 is driven by a 3/4HP motor, controlled by a variable frequency drive, delivering 2.2 to 22.4 inches per minute of movement. Special light curtains guard the loading/unloading areas to stop indexing the conveyor, while each loading position is monitored by a laser photo eye to ensure a position is unloaded before the next indexing occurs. The system is controlled by PCC with a human interface screen.
All safety equipment required by IRI, FM and National Fire Protection Association Standard 86 for gas-heated equipment is onboard this Grieve oven, including 2000CFM, 2HP powered forced exhausters. The entire unit is built to NEMA 12 electrical standards.
Controls include a digital indicating temperature controller, a two-pen 10” dia. circular chart recorder with one pen for temperature and one pen to indicate indexing, plus a tower light to indicate machine status.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 996 is a gas-fired, 350ºF (177ºC) jumbo walk-in oven, currently used for batch processing large composite structures. Workspace dimensions measure 10’ W x 32’ D x 8’ H. 1,200,000 BTU/HR are installed in a modulating natural gas burner to heat the unit, while 49,000 CFM total from two (2) 20HP recirculating blowers provide combination airflow to the workloads.
This Grieve jumbo walk-in batch oven features 4” insulated walls throughout, removable top-mounted heat chamber (shown removed in photo), the oven body split into four (4) sections for shipment with mating angle iron frames for easy reassembly in the field, plus aluminized steel interior and exterior.
All safety equipment required by IRI, FM and National Fire Protection Association Standard 86 for gas-heated equipment are onboard No. 996, including an 8000 CFM powered forced exhauster for quick purge and cool down, motorized dampers on the intake and exhaust for accelerated cooling, as well as a 10” diameter circular chart recording and programming temperature controller.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP