Contact us today:
(847) 934-4500
tdaro@bernardandcompany.com
Contact us today:
(847) 934-4500
tdaro@bernardandcompany.com
By Glen Guillemette, President of Guill Tool & Engineering Co., Inc., West Warwick, RI
Extrusion can be an inherently expensive activity and it is important to perform tool maintenance to minimize costs as much as possible. Extrusion processors need to be aware of the following factors in their attempts to be profitable:
■ Materials often cost more than labor.
■ Running a product oversize to hold the minimum tolerance can waste valuable material.
■ Downtime due to poor or damaged tooling is costly.
■ It is expensive to keep an extruder running if it is producing scrap.
Appropriate tool maintenance addresses all the above issues. New tips and dies are machined to a determined specification, ensuring concentricity and alignment. It is important to remember that minor misalignment of the tools may result in major problems in the final product.
Another adverse effect of unnecessary die adjustment is the stress introduced to the extrude caused by unbalanced flow. The net effect is the final product retains memory of this imbalance and unpredictable die swell occurs.
Dirty, neglected and improperly adjusted tools contribute to excessive material use. In turn, this complicates the die’s ability to maintain a minimum thickness tolerance. The excess material results in unnecessary costs that directly affect the profitability of the company and may in turn harm a valuable relationship with your customers.
Maintenance and cleaning of tooling is necessary and, when you are fully prepared for it, relatively easy. This is an important, controllable function that ensures a quality extruded product – one that meets dimensional specifications, maintains the specified minimum tolerance and delivers an economically produced end product.
Preparing For Proper Maintenance
Use a dedicated work cart exclusively reserved and equipped for extruder head maintenance. This cart should have a supply of spare components and hardware. Create a clean, organized work area with soft and clean renewable work surfaces. The work cart should include:
■ A vise with jaws of a soft metal, such as copper.
■ Special equipment, such as tip-removal tools.
■ Standard tools such as wrenches and soft-faced hammers.
■ A supply of soft, clean rags.
■ Spray bottles of cleaning solutions.
■ Spare parts suggested by your tooling supplier, properly organized and stored. The operator’s manual contains a list of these.
■ The repair and maintenance manual, provided with your equipment.
■ A small surface plate for a true, flat surface.
Cleaning Your Equipment While It Is Still Hot
In a die, the core tube goes to the back of the head and is adjustable. It is drawn in and out to adjust the gum space when the material is drawn out of the head. A careful cleaning is critical to ensure a smoother flow transition of the material.
Select tools and materials for cleaning:
• Brass pliers to grip material and aid in pulling.
• Brass scrapers, available in different widths for cleaning flat exposed surfaces.
• Brass bristle tube brushes, available in diameters from 1/16” to 1”, in 1/16” increments, ideal for cleaning holes and recesses.
• Brass rods – different diameter rods are good for pushing material out of flow holes.
• Copper gauze for cleaning and polishing exposed round or conical surfaces.
• Copper knives for removing residue from recesses and other hand-to-reach areas.
• Polishing compound to restore polished surfaces.
• Compressed air, which is more effective for releasing plastic but also aids in rubber removal. Be careful not to force debris into recesses with compressed air.
• Cleaning solutions may be useful – remember to use fresh, clean rags, as used rags often have metal chips embedded in them, which may scratch polished surfaces.
Make sure you have all the proper lifting aids available, including overhead hoists and hydraulic lifts. In most situations, the head and tooling are still at high temperatures. Therefore, properly lined gloves are needed when handling. Get help for moving heavy parts in awkward situations. Surfaces and edges are hard and therefore somewhat brittle, so dropping a part or striking parts together can result in damage.
Store you tools properly in a dry, clean area. A dedicated spot for each tool is best. These areas should have soft surfaces and each instrument should be covered after cleaning. Tools should be segregated so that they do not come in contact with each other. Clean all instruments thoroughly before storage.
For disassembly of tooling, it is imperative to use purpose-built tools to facilitate disassembly. These should be available from your tooling supplier but if they are not, consult with a reputable tooling house for replacement.
Check Your Operator’s Manual
Follow the guidelines outlined in your operator’s manual. Individual tools may have specific recommendations, so contact your supplier if anything is unclear. They understand that optimum performance relies upon proper care and maintenance, so they’ll be happy to help. Here are some useful tips:
• Clean your equipment while it is still hot, since residue will be easier to remove. It helps to remove and clean one piece of tooling at a time, to maintain elevated temperatures.
• When cleaning dual-compound crossheads, such as plastic and rubber, always clean the plastic tooling first and the rubber tooling second.
• Never use steel tools such as scrapers or screwdrivers. These can scratch and mar the tooling.
• Do not use open flames. This generates excessive heat, especially in thin sections, which can affect hardness, concentricity and tolerances of components.
• Cleaning oven – use for plastic only, not rubber. Follow the manufacturer’s recommendation. If no temperatures are specified, do not exceed 850°F and do not quench the tooling to cool, because this could affect the hardness, concentricity and tolerances of the tool parts.
• Cleaning materials – several compounds are available to purge the extruder screw and barrel of residual polymer. This helps considerably in the final cleanup.
Die components, especially those with sealing and locating surfaces, are a key to the performance and successful end products. These surfaces received the most care and attention during manufacturing and are the control surfaces that ensure uniformity throughout. Precision-machined alignments are affected by even a speck of dirt measuring only a couple thousandths of an inch. A human hair is about three thousandths of an inch in diameter and, since there are many such surfaces in a high-quality tool, cleanliness is critical.
It is important to check tools for deformities. Burrs, scratches, and scrapes are usually a result of careless handling and/or storage of equipment.
When compared to single-layer heads, all multi-layer extrusion heads pose an even greater challenge for maintenance. The number of sealing and centering surfaces multiplies and can magnify the result of dirty tools.
During changeovers, the head may be disassembled to change compounds and/or tips and dies.
Foreign matter is usually introduced at this time and residual materials must be thoroughly removed.
Physical tool damage often occurs during this phase due to mishandling and poor storage techniques. These are highly precise parts but can also be heavy and bulky to remove by hand.
Make Repairs As Needed
Examine all surfaces for any irregularities such as burrs and scratches, since these must be repaired before the head is reassembled. Most manufacturers recommend using a hand polishing stone to remove the burrs present. Follow stoning with a application of a 600-grit emery cloth if necessary, but avoid rounding edges that are intended to be sharp.
Flat sealing surfaces can be cleaned using a stone, followed by a 600-grit emery cloth. Place the cloth on a clean, flat surface, preferably a surface plate, then apply friction in a circular hand motion until the area is clean and even. The parts in question should all be hardened steel alloys and will not be adversely affected using these methods. Inconel, Monel and Hastelloy are typically not heat-treated, requiring special care and handling to avoid any damage.
Putting It All Back Together
Working from your dedicated tool cart, follow the die manufacturer’s instructions for reassembly. Give each component a final wipe down with a clean rag before installing. Even the smallest amount of grit, dirt and residual material must be removed.
Use either mechanical or manual assistance for heavy and awkward components to avoid unnecessary mishaps. Reapply anti-seize compound to all fasteners, if required.
Tighten fasteners to the manufacturer’s recommended specification, as well as in the recommended sequence. This fastening sequence should be specified in the manual and is generally in a star pattern, tightening gradually until the proper torque is achieved. This prevents distortion of the tooling.
One of a die manufacturer’s main goals is to form a concentric cone of compound as quickly and accurately as possible in the primary section of the die, when the extrudate first emerges from the die’s distribution capillaries.
A properly designed and manufactured die has even distribution close to the extrudate entrance point, but this effort is negated once the die is adjusted, shifting the extrudate off to one side. An eccentric cone is formed in the primary area and a concentric cone exits at a point in the process, rather than a smooth, continuous flow path with decreasing volume. A properly manufactured and aligned extruded head, along with well-maintained tooling, should require little or no adjustment.
FOR MORE INFORMATION, PLEASE CONTACT:
Guill Tool & Engineering Co., Inc.
10 Pike Street
West Warwick RI, 02893, USA
Tel: 401-828-7600
Email: sales@guill.com
www.Guill.com
About the company
Guill is a leading Extrusion Tooling Designer & Manufacturer, with over 65 years of experience. Our engineers specialize in polymer extrusion tooling design, utilizing the most advanced technology available. We draw on our years of experience to tailor tooling and die design for your industry, helping you increase efficiency and decrease production cost when operating your extruders. From extruding PVC pipe and wire & cable jacketing to complex profile co-extrusions for multi-layer and multi-lumen medical tubing, we are committed to helping customers produce the best end products possible. Guill designs, engineers, machines, tests and delivers our equipment worldwide to the extrusion market. The company also runs a full rheology and test extrusion lab.
Continue reading
Guill Tool, a global leader in extrusion tooling, is pleased to announce the appointment of Stephen Ovren as the company’s sales manager. The announcement was made by Chuck Paull, Chief Marketing Officer, at the company’s West Warwick, Rhode Island headquarters.
Ovren obtained an M.B.A from the University of Miami Florida and his B.S. in Industrial Technology and Manufacturing Engineering from the University of Wisconsin-Stout Polythetic.
Prior to Guill, Ovren was a Senior Business Consultant at GES/GRB Consulting and General Manager at ATW Companies. The former organization provides strategic partnership through team extension to the Submarine Industrial Base, while the latter is a supplier of precision tubing and fabricated metal components for the medical, aerospace, telecommunications, industrial and defense sectors.
On March 23, 2026, Ovren became the company’s Sales Manger for the Extrusion Division. His responsibilities include sales, marketing and customer service.
In addition to spending time with his family, Ovren enjoys business, technology and music. His hobbies include sailing, boating, travelling and sports.
Commenting on this new hire, Paull said, “We’re thrilled to have Stephen on our team. His previous experiences in tubing as well as work in the submarine industry are an asset.”
For more information, please contact:
Chuck Paull, Chief Marketing Officer
Guill Tool & Engineering
10 Pike Street
West Warwick, RI 02893
USA
Phone: 401- 589-6883
cpaull@guill.com
With more than 60 years of experience, Guill is a recognized leader in the design and manufacture of extrusion technology for numerous applications including medical tube, multi-lumen and multi-layer, profile products and fiber optics. Also included in our suite of products is extrusion tooling for automotive hose & tube, industrial hose & tube, pipe, blow molding, food, pelletizing, rubber & silicone, wire & cable and wood composite.
Our engineers specialize in custom extrusion tooling design, utilizing the most advanced technology available. We draw on our years of experience to tailor tooling and die design for your industry, helping you increase efficiency and decrease production cost when operating your extruders. Guill designs, engineers, machines and delivers our equipment worldwide to the extrusion market. Based proudly in Rhode Island (USA), we also maintain a European sales office to better serve our partners in the EU.
Continue readingGuill Tool, the global leader in extrusion tooling, announces its 10-Day Program. This program applies to eligible tips and dies that will be shipped within 10 business days of receiving the purchase order from the customer.
Guill high-quality precision tips and dies have been manufactured in the U.S. for over 65 years. All Guill extrusion tools are produced using certified and documented quality steel material, specifically qualified for the polymer to be extruded. Furthermore, Guill designs tips and dies for any application the customer requires. These feature multi-lumen, stripe, multiple stripe, wire and cable, hose, pipe, tube, fiber optic, blown film, corrugated tube and profile. Dies include face seal, shouldered, snap-together, floating, die plate, interchangeable die plate and custom dies. Available tips include single and multi-lumen, threaded style, snap-together, fixed-center shoulder, profile, tapered style and custom.
To learn which tools are eligible for the program, check with the company or local Guill sales representative. For all other parts, company personnel will review the customer’s drawing to determine eligibility for the program.
Eligible tips and dies for this program must have a diameter less than 1.5” and a length less than 4.75.”
Guill proudly manufactures its products in the U.S. under the quality standards of ISO 9001:2015 and AS9100:2016.
For more information, please contact:
Tom Baldock, Sales Manager, Extrusion
Guill Tool & Engineering
10 Pike Street
West Warwick, RI 02893
USA
Phone: 401-465-5526
tbaldock@guill.com
Guill Tool, global leader in extrusion tooling, has expanded its lab capabilities to better serve the global extrusion market with the creation of Guill Labs. The labs include the company’s state-of-the-art rheology lab and a facility focused entirely on the extrusion process.
Guill’s existing rheology lab measures the flow characteristics of plastics and rubber to predict how a customer’s material will flow through the company’s extrusion dies before production. Tooling geometry is virtually optimized, and the project can be viewed in 3D CAD. Machines used include a rotational rheometer, scanning calorimeter, thermal conductivity meter and a new CT scanner.
The rotational rheometer quickly generates visco-elastic data for polymer melts, precisely capturing polymer melt properties. Test temperature ranges between ambient and 300°C. The lab’s scanning calorimeter characterizes the thermal properties of a polymer sample, such as crystallization temperature, glass transition temperature and head capacity of the sample. Knowing these thermal properties permits the simulation of shear heating and hot and cold spots in the flow area. The thermal conductivity meter is used to determine the thermal conductivity of the polymer sample across a range of temperatures.
This in-house lab provides faster turnaround on test results, reducing delays during the design process and offering better control over the testing parameters. The result is a high-quality part delivered on time.
The new test extrusion facility features various pieces of equipment including two Killion 1.25″ extruders, an RDN 2.0 PVS vacuum tank, one Keyence LS9000 dual axis laser gauge, two Dri Air ARID-X 10 30lb capacity driers, a custom-built tubing puller and an Accurate Thermal Systems FTBLL47 fluidized bath. In addition, the test lab permits single and co-extrusion capabilities with its tried-and-true die designs. Access to exotic extrusion processes such as rotary die extrusion of filament and tubular end-products are also available.
Supporting extrusion trials, the test lab also offers extrusion training, die cleaning services, sample inspection, and end-product testing. Guill’s fluidized bath has a 50°C-605°C temperature range and a working volume of 15.7” x 47.”
Customers can test materials, dies and actual extrusion run time… all on Guill premises.
For more information, please contact:
Tom Baldock, Sales Manager, Extrusion
Guill Tool & Engineering
10 Pike Street
West Warwick, RI 02893
USA
Phone: 401-465-5526
tbaldock@guill.com
A. Roger Guillemette, 81, of Narragansett, Rhode Island, died Friday, June 5th. Born in Providence, RI, he was the son of the late Joseph Arthur and Yvonne (Roy) Guillemette, both Canadian born.
Roger graduated from Coventry High School and served as a machinist in the US Army, 600th Engineering Aviation Maintenance Co. He was stationed in 
Korea and Mineral Wells, Texas.
He and his wife Claudette raised their four children in the village of Phenix, RI where they hosted many a sing-a-long around their piano. Among the many other things in life he thoroughly enjoyed, Roger loved playing Skip-Bo with his family and friends.
An entrepreneur, he established several businesses throughout his lifetime, creating long-term steady employment opportunities for many people. Guill Tool & Engineering Company was established in 1962 and remains in operation today, as a global leader in extrusion tooling. Until recently, Roger was very active as the CEO and always an inspiration to his employees, as his passion for engineering quality products and customer solutions never waned. He had been a fierce advocate for U.S. manufacturing on local and national levels; participating in many organizations as well as advocating for STEM education in the state of Rhode Island.
Professionally, Roger was SE MA Chapter past President of NTMA-RI and a longtime member of the Wire Association and Society of Plastic Engineers. Guill Tool, as a result of Roger’s leadership and drive, remains active in the Rhode Island Manufacturers Association, National Association of Manufacturers, National Institute of Manufacturing Skills, the Rhode Island STEM Center and other local endeavors for the betterment of the industry and community.
Memorial contributions may be made to The Johnny Cake Center of Peace Dale, 1231 Kingstown Rd., Peace Dale, RI 02879. Visit www.nardolillo.com for online condolences.
For more information, please contact:
Rich Guillemette
Guill Tool & Engineering
10 Pike Street
West Warwick, RI 02893
USA
Phone: 401-828-7600
www.guill.com
rguillemette@guill.com