Contact us today:
(847) 934-4500
tdaro@bernardandcompany.com
Contact us today:
(847) 934-4500
tdaro@bernardandcompany.com
No. 1009 is an electrically-heated, 650ºF (~343ºC) walk-in oven from Grieve, currently used for heat treating large steel spools. Workspace of this unit measures 10’ W x 7’ D x 8’ H. 180 KW are installed in Incoloy-sheathed tubular heating elements, while a 24,500 CFM, 20-HP recirculating blower provides combination airflow to the workload.
This walk-in oven features 5” insulated walls, aluminized steel interior and exterior and a removable top-mounted heat chamber. Behind the oven, a motor operates the vertical lift door with a counter-weight.
In addition, No. 1009 has a 5000 CFM powered forced exhauster and motorized dampers on intake and exhaust for accelerated cooling of the oven.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 1013 is an electrically-heated, 350ºF (~177ºC) cabinet oven from Grieve, currently used for curing rubber parts at the customer’s facility. Eight workspace openings with roller supported shelves each measure 36” W x 6-1/4” H x 24” D. 45 KW are installed in Incoloy-sheathed tubular heating elements, while a 7800 CFM, 5-HP recirculating blower provides horizontal airflow to the common central duct of the oven to heat the load.
This Grieve cabinet oven features 4” thick insulated walls, aluminized steel interior and exterior, top mounted heat chamber with access doors and 200 lb. capacity shelves that extend 24” in front of the oven for easier loading.
No. 1013 is also equipped with a digital indicating temperature controller, manual reset excess temperature controller with separate contactors, recirculating blower airflow safety switch and all required safety equipment for handling flammable solvents, including explosion venting door hardware. A programmable timer, interlocked to each door via a proximity switch, plus green lights for each door to indicate when curing time is completed are also onboard this oven.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 1003 is a gas-fired, 500ºF (~260ºC) walk-in oven from Grieve, currently used for drying molded fiber parts at the customer’s facility. Workspace dimensions in this oven measure 48” W x 48” D x 72” H. 800,000 BTU/HR are installed in a modulating natural gas burner to heat the oven chamber, while a 4200 CFM, 3-HP recirculating blower provides vertical upward airflow from a duct beneath the loading truck to the workload.
This Grieve walk-in oven features 4” thick insulated walls, aluminized steel exterior, Type 304, 2B finish stainless steel interior with continuously welded seams and insulated floor with integral truck wheel guide tracks.
No. 1003 has all safety equipment onboard to process flammable solvents, as required by IRI, FM and National Fire Protection Association Standard 86 for gas-heated equipment, including a 975 CFM powered forced exhauster and purge timer.
Additionally, controls on this Grieve walk-in oven include a digital programming temperature controller, digital shut down timer with audible alarm, fused disconnect switch and 8-point internal thermocouple jack panel wired to the jack panel on the face of the control panel.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 995 is an electrically-heated, 1250ºF (~670ºC) high-temperature cabinet oven from Grieve, currently used for preheating steel forgings at the customer’s facility. Workspace dimensions in this oven measure 20” W x 40” D x 20” H. 60 KW are installed in Incoloy-sheathed tubular elements to heat the oven chamber, while a 2000 CFM, 2HP recirculating blower provides horizontal airflow to the workload.
Specially designed to handle high-temperature operation, this Grieve cabinet oven features 10” thick insulated walls, comprising 2” of 1900ºF block and 8” of 10 lb./cf density rockwool, plus Type 304, 2B stainless steel interior, motor-operated vertical lift door and alloy roller rails at the workspace floor level, rated for 1500 lb. loading.
No. 995 is built to NEMA 12 electrical standards and is equipped with SCR power control.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
Grieve Corporation introduces Model VA-500, a standard 500ºF electric cabinet oven, which features full vertical-up air flow. This unit is specifically designed for workloads where heated air must pass upward through the load – such as open-ended cylinders or hanging parts.
Workspace dimensions inside this unit measure 26” wide x 26” deep x 38” high. 6.6 kW power is installed in Nichrome wire heating elements, while a 700 CFM, 1/2 HP recirculating blower provides vertical upward airflow to the workload.
No. 828 has 4” thick insulated walls, an aluminized exterior, Type 430 stainless steel interior, 12 shelf supports on 3” centers, two (2) standard nickel plated wire shelves with 200 lb. capacity each and a heavy-duty door with explosion-venting latches and a high-temperature door gasket with stainless steel spring insert.
Standard equipment on this Grieve cabinet oven include a digital indicating temperature controller, manual reset excess temperature controller with separate heating element control contactors and recirculating blower airflow safety switch. This unit also meets the requirements of National Fire Protection Association Standard 86, Industrial Risk Insurers, Factory Mutual and OSHA Standards, as do all standard Grieve cabinet ovens.
This unit was completely designed, engineered, built and fully tested by Grieve.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 1005 is an electrically-heated 350ºF (~177ºC) cabinet oven from Grieve, currently used for curing long composite parts held in fixtures at the customer’s facility. Workspace dimensions of this oven measure 108”W x 18”D x 18”H. 15KW are installed in Incoloy-sheathed tubular elements to heat the unit, while a 1000 CFM, 1-HP recirculating blower provides horizontal airflow across the load.
This Grieve cabinet oven features 4” insulated walls throughout, aluminized steel exterior, Type 304 2B stainless steel interior, motor-operated vertical lift door, 8” x 10” double pane Pyrex window for viewing the load, interior oven light and tower light to indicate oven status.
All safety equipment required for handling flammable solvents is onboard No. 1005, including motorized dampers on the intake and exhaust for accelerated cooling. A 29” x 25” x 4” thick pleated fresh air filter and photohelic pressure gauge with alarm to monitor internal oven pressure are also included.
This Grieve cabinet oven also features a digital programming temperature controller with tamper-proof cover, strip chart recorder and fused disconnect switch. No. 1005 is built to NEMA 12 electrical standards.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 1002 is an electrically-heated, 500ºF (~260ºC) cabinet oven from Grieve, currently used for various test procedures in the customer’s laboratory. 8KW are installed in Incoloy sheathed tubular elements to heat the unit, while a 400CFM, 1/3-HP recirculating blower provides horizontal airflow across the load.
This Grieve oven features 4” insulated walls throughout, Type 304, 2B stainless steel interior with continuously backwelded seam construction, stainless steel exterior with #4 brushed finish, heavy-duty door and door frame, three nickel-plated wire shelves and adjustable patented opposed louvers on full coverage supply and return ductwork.
No. 1002 is equipped with all safety equipment for handling flammable solvents, including explosion-venting door hardware, powered forced exhauster airflow safety switch, purge timer and digital indicating temperature controller.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 875 is a gas-fired, 1600ºF (~871ºC) specialty furnace from Grieve, currently used for burning off hydrocarbons from machined alloy components at the customer’s facility. Three workspace stations are provided in this furnace, each measuring 10” W x 10” D x 2” H. 500,000 BTU/HR are installed in a modulating natural gas burner to heat the unit. An exhaust hood is positioned over the flue, with a remote mounted 16” dia. tubeaxial fan, driven by a 3/4 HP motor.
This unique Grieve furnace features 5” thick insulated walls throughout, comprising 2” of 2300ºF ceramic fiber and 3” of 1900ºF block insulation. In addition, 6-1/2” floor insulation is made from 4-1/2” of 2300ºF firebrick and 2” of 1900ºF block insulation.
Three air-operated vertical lift doors seal the workspaces, while three independent timers are provided, each with a pilot light, audible alarm and safety door interlock, to individually time the process cycle in each furnace compartment. A tower light is onboard to indicate operational status.
No. 875 is built to JIC/NEMA 12 electrical standards.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 939 is a 2000°F gas-heated box furnace from Grieve, currently used for preheating metals prior to forging. Workspace dimensions measure 72”Wx36”Dx48”H. 700,000 BTU, installed in two modulating natural gas burners with a floor-mounted combustion air blower, heat the unit.
This Grieve furnace features 7” insulated walls made with 5” of 2300°F ceramic fiber and 2” of 1700°F ceramic fiber. The 7” floor comprises 4-1/2” of 2300°F firebrick and 2-1/2” of 1900°F block insulation. A firebrick plate hearth is supported by firebrick piers. The unit has a manually-operated vertical lift door.
No. 939 also includes a digital indicating temperature controller, manual reset excess temperature controller with separate contactors and a fused disconnect switch.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 943 is an electrically-heated, 2000°F top-loading pit furnace from Grieve, currently used on a variety of heat treating applications at a customer’s facility. Workspace dimensions measure 24”W x 24”D x 24”H. 26kW installed in nickel chrome wire coils, supported by vacuum-formed ceramic fiber, supply heat to the workload.
This Grieve pit furnace feature 7” thick insulated walls, comprising 5” of 2300°F ceramic fiber blanket and 2” of block insulation. A 6-1/2” thick furnace floor is made of castable refractory materials.
No. 943 also includes an air-operated vertical lift door and a reinforced 1/2” steel top plate to protect the unit while loading and unloading occur.
Safety equipment includes an adjustable, thermocouple-actuated, manual reset excess temperature controller, separate heating element control contactors and a door interlock switch.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP