Contact us today:
(847) 934-4500
tdaro@bernardandcompany.com
Contact us today:
(847) 934-4500
tdaro@bernardandcompany.com
No. 949 is a 500°F, electrically-heated Class 100 cleanroom oven from Grieve, currently used for heating glass vials at the customer’s facility. Workspace dimensions measure 36”W x 36”D x 51”H. A 1500 CFM, 2HP recirculating blower provides horizontal airflow to the workload.
This Grieve cleanroom oven features a Type 304, 2B stainless steel interior with continuously backwelded seams, stainless steel exterior with #4 brushed finish and 4” insulated walls throughout the unit.
A 12” x 12” x 6” thick HEPA fresh air filter with 2” prefilter, a 12” x 12” x 6” thick stainless steel high temperature HEPA filter on the exhaust outlet and two (2) 24” x 30” x 6” thick stainless steel high temperature HEPA recirculating air filters are also included.
No. 949 has a minihelic pressure gauge and DOP validation port across the recirculating blower air filter bank, plus a recording and programming temperature recorder is also onboard the unit.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 935 is an electrically-heated, 500°F universal oven from Grieve, currently used for curing rubber parts at a customer facility. Workspace dimensions measure 48”W x 48” D x 36” H. 12KW installed in Nichrome wire heating elements provide the power to the oven, while a 600 CFM, 1/2 HP recirculating blower provides a universal front-to-rear airflow pattern.
This Grieve oven features an aluminized steel exterior, Type 430 stainless steel interior and 4” insulated walls throughout. An integral leg stand and swivel casters with swivel locks and wheel brakes are provided to make the unit completely portable.
No. 935 includes all the safety equipment onboard for handling flammable solvents, including explosion venting door hardware and a 325 CFM powered forced exhauster for proper ventilation. This Grieve universal oven also features a 10” diameter circular chart recorder and SCR power controller.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 939 is a 2000°F gas-heated box furnace from Grieve, currently used for preheating metals prior to forging. Workspace dimensions measure 72”Wx36”Dx48”H. 700,000 BTU, installed in two modulating natural gas burners with a floor-mounted combustion air blower, heat the unit.
This Grieve furnace features 7” insulated walls made with 5” of 2300°F ceramic fiber and 2” of 1700°F ceramic fiber. The 7” floor comprises 4-1/2” of 2300°F firebrick and 2-1/2” of 1900°F block insulation. A firebrick plate hearth is supported by firebrick piers. The unit has a manually-operated vertical lift door.
No. 939 also includes a digital indicating temperature controller, manual reset excess temperature controller with separate contactors and a fused disconnect switch.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 944 is a 750°F electrically-heated cabinet oven from Grieve, currently used for sintering operations at a customer’s facility. Workspace dimensions measure
44”W x 30”D x 60”H. 30kW installed in Incoloy-sheathed tubular heating elements heat the oven, while a 2000 CFM, 2 HP recirculating blower provides a horizontal airflow to the workload.
The Grieve cabinet oven features 6” insulated walls, aluminized steel exterior, Type 430 stainless steel interior and four 20”W x 28”H independent doors for easy access to the workspace. Eight removable loading pans are provided for each door compartment (32 pans total).
No. 944 has a digital indicating temperature controller, manual reset excess temperature controller with separate contactors and 10” diameter circular chart recorder onboard. In addition, four timers, each with a pilot light and door interlock, are included to individually time the heating process in each compartment.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 946 is a 1000°F, electrically-heated vertical airflow walk-in oven from Grieve, currently used for curing coatings on titanium screens. Workspace dimensions measure 72”W x 156”D x 96”H. 360kW installed in Incoloy-sheathed tubular heating elements provide the power, while a 24,500 CFM, 20 HP recirculating blower provides a vertical downward airflow to the workload.
This Grieve oven features 8” insulated walls, Type 304L, 2B finish stainless steel interior, stainless steel exterior with #4 brushed finish and 6” insulated floor with integral truck wheel guide tracks for easy loading and unloading.
No. 946 has double doors, front and rear, each with inner and outer door gaskets. The inner gasket seals against the door plug, while the outer gasket seals directly against the front of the oven.
A removable top-mounted heat chamber (shown removed in photo) is also provided.
Safety equipment is onboard for handling flammable solvents, including explosion-venting door hardware.
Also featured on this Grieve walk-in oven are digital programming temperature controller, manual reset excess temperature controller with separate contactors, recirculating blower airflow safety switch and SCR power controller.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 950 is a 350°F gas-heated walk-in oven from Grieve, currently used for bonding composite materials inside molds. Workspace dimensions of this oven measure 10’W x 20’D x 8’H. 700,000 BTU/HR installed in a modulating natural gas burner provide heat, while a 24,500 CFM, 20-HP recirculating blower provides a combination airflow to the workload.
The Grieve walk-in oven (shown here split into three sections for shipping) features 4” insulated walls, aluminized steel interior and exterior, heavy-duty double doors and a 1/4” steel plate floor.
All safety devices required by IRI, FM and NFPA Standard 86 for gas-heated equipment are onboard No. 950, including a 6500 CFM powered forced exhauster. Also included here are a recording and programming temperature controller, plus motorized dampers on the air intake and exhaust for accelerated cooling.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 937 is a gas-heated, 500°F belt conveyor oven from Grieve, currently used for curing rubber. Workspace dimensions measure 36”W x 68”D x 15”H. 175,000 BTU/hr installed in a modulating natural gas burner heat the unit, while a 3,300 CFM,
2 HP recirculating blower provides vertical downward airflow to the workload. This oven features a 6” long open belt loading zone, 12” long insulated, unheated entrance vestibule, 60” long insulated heating zone with recirculated airflow and a 12” long insulated unheated exit vestibule.
The unit has 4” insulated walls throughout, aluminized steel interior, stainless exterior with #4 brushed finish and a 30” wide, 1” x 1” flat wire conveyor belt with 1/4 HP motor drive, variable from 1-20 inches per minute.
This Grieve oven also included a digital indicating temperature controller and fused disconnect switch.
A side hinged door allows access to the workspace and heat chamber.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 953 is a 500°F, electrically-heated universal oven from Grieve, currently used by the customer for various paint baking operations. Workspace dimensions of this oven measure
36”W x 36”D x 48”H. 9kW installed in Nichrome wire heating elements provide the power, while a 600 CFM, 1/2-HP recirculating blower provides horizontal front-to-rear airflow.
This universal oven features 4” insulated walls, aluminized steel exterior, Type 430 stainless steel interior and an integral leg stand.
Safety equipment required for handling flammable solvents is onboard this Grieve oven, including explosion-venting door hardware, powered forced exhauster with airflow safety switch and purge timer.
No. 953 also features a digital indicating temperature controller and a recirculating blower airflow safety switch.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 947 is an electrically-heated 350°F cabinet oven from Grieve, currently used for storing modeling clay at an automaker’s model shop. Workspace dimensions measure
35”W x 31”D x 42”H. 9.6 kW installed in Nichrome wire heating elements provide heat input, while a 750 CFM, 3/4 HP recirculating blower provides horizontal airflow across the load.
This Grieve cabinet oven features 4” thick insulated walls, a stainless steel exterior with #4 brushed finish Type 430 stainless steel interior, two independently operating doors for access to the workload and two tiers of five shelves, supported on rollers. Swivel casters with swivel locks and wheel brakes are also included for oven portability.
No. 947 has a digital indicating temperature controller, manual reset excess temperature controller with separate control contactors and recirculating blower airflow safety switch.
As shown in the photo, this Grieve oven has a top-mounted heat chamber for space efficiency.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 943 is an electrically-heated, 2000°F top-loading pit furnace from Grieve, currently used on a variety of heat treating applications at a customer’s facility. Workspace dimensions measure 24”W x 24”D x 24”H. 26kW installed in nickel chrome wire coils, supported by vacuum-formed ceramic fiber, supply heat to the workload.
This Grieve pit furnace feature 7” thick insulated walls, comprising 5” of 2300°F ceramic fiber blanket and 2” of block insulation. A 6-1/2” thick furnace floor is made of castable refractory materials.
No. 943 also includes an air-operated vertical lift door and a reinforced 1/2” steel top plate to protect the unit while loading and unloading occur.
Safety equipment includes an adjustable, thermocouple-actuated, manual reset excess temperature controller, separate heating element control contactors and a door interlock switch.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP