Contact us today:
(847) 934-4500
tdaro@bernardandcompany.com
Contact us today:
(847) 934-4500
tdaro@bernardandcompany.com
Myriad ways to boost productivity, enhance shopfloor flexibility and preserve data security…
all on the market today for machine shops of many sizes
by Ramona Schindler, Siemens Industry, Inc.
Ramona Schindler is the business development manager for the digitalization of machine tools at Siemens Industry, Inc.
With the machine tool industry in flux currently, as it seeks to find its way into the digital world, the entire process chain necessitates the integration of suppliers who can respond to the needs of the industry. The situation has very little “history” and so large end-customers and machine shops of all sizes are seeking assistance from their suppliers, while the machine tool builders are likewise seeking to partner with hardware, software, communications and controls suppliers to bring the most needed machine types to market.
Within this scenario, the large manufacturers focus on the “big picture” as they link their production departments, often located in different cities or even countries throughout the supply chain, while the small contract manufacturer with a dozen local customers wonders how this drive to the digital factory will impact their world— and it will. The good news is they can already utilize the IT, apps and communication devices onboard many of today’s advanced machine tools and the rapidly emerging skill sets of new workers in the machine tool industry to develop and implement the three basic levels of machine shop operations.
These levels comprise the communications hardware and protocols at the machine, the integration of inline machine production and the data resident in the cloud, which can be used today in many ways to boost productivity through automated analytics of the shopfloor’s utilization; to enhance shopfloor flexibility through optimized methods of production; and to preserve data security by state-of-the-art software solutions. In essence, the capture and manipulation of such data drives the productivity of a small shop or large production department in quite similar ways. The concept of your manufacturing seen as an eco-system, with information and control capabilities at all levels, can drive that “factory of the future” and, the good news, it can do so today.
From the CNC on your machines, whether they are number three in a mold shop or three hundred at a transmission plant, you can extract the pre-analytics that can be used to feed existing apps or to develop the most beneficial apps to suit your production scheme and workflow. The beauty of the app, whether you create your own, have a third-party integrator develop it or use existing solutions, is that it provides the hierarchy of information to your operator, line supervisor, plant operations personnel or global IT department in a similar manner. This scalability offers immediate benefit to manufacturers of all sizes and it does so, right now. For example, machine tool users can quickly and easily configure a CNC machine’s connections and ascertain its program status and operating mode. This will lead to increased manufacturing productivity, reliability and availability of the machine.
Cloud-based systems always raise the question of security issues, as the data flow in real time at high-speed and can be made accessible to many levels of information managers and operations personnel. It is critical that a thorough assessment of the access to that data precede the development of any communications protocol.
Digitalization is not necessarily a costly undertaking. First steps can be quickly implemented on the shopfloor, for example, through the use of small PCs like Raspberry Pi. Likewise, for the machine tool builder, the development of “digital twin” engineering, where a machine is fully designed, commissioned and test run in a virtual environment, is rapidly changing the playing field in this industry.
The number of connected machines is increasing exponentially and this is not simply engineering adornment, it is a necessary function for any manufacturer. Being able to quickly determine the overall equipment effectiveness (OEE) and conduct practical, beneficial predictive maintenance actions on your machines will contribute greatly to the production and profitability of your operation.
The management of today’s manufacturing shops and production departments have the challenge to become aware of all these available technologies and chart a course for their implementation. This is not a “someday” scenario; it is a vital journey for shops of all sizes, if they want to remain competitive in today’s changing market.
My last advice, look at digitalization as an umbrella for the secure shielding of smart data, not just big data. IIOT is the essential connectivity for all the elements of data on machine performance, materials flow, operations efficiency and ultimately your overall productivity.
It’s an exciting time in our business.
Digitalization, for example from Siemens, can be implemented at every level of machine tool operation today.
Exact’s new scanner provides fast and accurate data for applications such as: reverse engineering, inspection, construction (BIM), product design, forensics, and heritage presentation.
Exact Metrology is proud to announce the immediate availability of its new Artec Ray laser scanner. Ideal for scanning large objects like wind turbines, ship propellers, airplanes, and buildings, the Artec Ray offers ultra-high precision and speed. With the ability to scan up to 110 meters away, this scanner offers submillimeter distance accuracy and best in class angular accuracy. In addition, data capture is cleaner than with any other 3D scanner of this type and keeps noise levels at an absolute minimum. As a result, post-processing time is greatly reduced.
Scanning with Artec Ray is easy. Users need only place it on a tripod in front of the object they wish to scan and press the button. Portable and compact, the laser scanner can be set up easily indoors or outdoors. There’s no need to worry about finding a power source, since the internal battery lasts up to 4 hours.
Additionally, Artec Ray is equipped with software solutions. Once scanned, the scan is processed directly into the powerful Artec Studio, then seamlessly exported to Geomagic Design X.
To obtain maximum benefits, Artec Ray can be paired with Eva or Spider handheld Artec scanners to scan hard-to-reach areas such as the interiors of cars or add intricate detail to a large-scale 3D model.
For more product information, please contact:
EXACT METROLOGY, INC.
Steve Young, President
11575 Goldcoast Drive
Cincinnati, Ohio 45249
Phone: 513-831-6620
Toll Free: 866-722-2600
www.exactmetrology.com
stevey@exactmetrology.com
EXACT METROLOGY, INC.
Dean Solberg
20515 Industry Avenue
Brookfield, WI 53045
Telephone: 262-533-0800
Local: 866-722-2600
www.exactmetrology.com
deans@exactmetrology.com
Exact Metrology, with facilities in Cincinnati and Milwaukee and affiliated offices throughout the Midwest, is a comprehensive metrology services provider, offering customers 3D scanning, reverse engineering, quality inspection, product development and 2D drawings. The company also provides turnkey metrology solutions, including equipment sales and lease/rental arrangements.
Continue readingSiemens Factory Automation seeks to open market for its embedded and panel PC products in healthcare segment, including x-ray, analyzer, imaging and diagnostic equipment plus data acquisition to patient and hospital records; domestically sold product now assembled in Lebanon, Ohio
At the recent Medical Design & Manufacturing (MD&M) show held on February 6-8 in Anaheim, California, the PC-based Automation Marketing Manager from Siemens Digital Factory Division, Thorsten Julich, announced at the booth that the company plans to develop the medical equipment market for its box, panels and rack PC products. In addition, Julich noted the suite of products targeted for use in the North American market are being assembled at the Siemens facility in Lebanon, Ohio, thereby shortening lead times significantly, up to 40%, for the OEM machine builders and system integrators.
“As time to market for new product development continues to shorten in the industrial PC market, while the life cycle of such products has become longer,” Julich noted, “it is critical that Siemens bring its embedded box and panel products to market in a more efficient manner.” He also observed the drive to upgrade systems from older technologies at all levels of the healthcare industry is moving quickly, as the market trends toward a digital and cloud-based environment with customized apps to enable more immediate and network-wide system of record-keeping.
Commenting on the Lebanon, Ohio facility, Thorsten Julich noted the in-house development of Siemens IPC technology for this market segment will include both software and motherboard manufacturing. Complementing the PC product offerings, rugged handheld units with Windows 7 or 10 compatibility, will be offered for technician ease-of-use and connectivity to cloud-based systems.
A scalable portfolio of products, based on Intel CPU technology, will provide a full spectrum of configurations to suit most applications currently in the medical equipment market, Julich said.
Single- and multi-touch panel PCs will be offered in 7”-22” displays in the company’s Nanobox/Nanopanel and Microbox/Micropanel designs.
Julich concluded, “Because our IPC range has full interface capabilities with SCADA software plus the medical grade tablets offer full compatibility with networking solutions in the digital world, we believe the company is well positioned to enter this medical equipment market with a very substantial and sustainable suite of products and services.” He also mused the Lebanon, Ohio facility would give Siemens something of a “home field advantage” in the market.
To learn more about the event and products, please visit: usa.siemens.com/ipc or contact Siemens via email at info.ipc.us@siemens.com.
Siemens Digital Factory (DF) offers a comprehensive portfolio of seamlessly integrated hardware, software and technology-based services in order to support manufacturing companies worldwide in enhancing the flexibility and efficiency of their manufacturing processes and reducing the time to market of their products.
Siemens Corporation is a U.S. subsidiary of Siemens AG, a global powerhouse focusing on the areas of electrification, automation and digitalization. One of the world’s largest producers of energy-efficient, resource-saving technologies, Siemens is a leading supplier of systems for power generation and transmission as well as medical diagnosis. With approximately 351,000 employees in 190 countries, Siemens reported worldwide revenue of $88.1 billion in fiscal 2016. Siemens in the USA reported revenue of $23.7 billion, including $5.4 billion in exports, and employs approximately 50,000 people throughout all 50 states and Puerto Rico.
Continue reading
Siemens Factory Automation gathers its team, Solution Partners and End User community for four days of learning and fun
130 people gathered for Siemens’ SCADA/IPC days in San Antonio.
From February 19-22, 2018, at the Riverwalk Westin in San Antonio, Texas, approximately 130 people gathered for four days of product presentations, emerging technology discussions and a market trend outlook at the Siemens Factory Automation SCADA/IPC Days 2018. Members of the Siemens management, sales and support team joined their Solution Partners and a diverse assortment of end user companies from various market segments to review new product offerings in the IPC segment of the Siemens portfolio, plus a number of new platforms in the SCADA segment. The event was hosted by the product marketing teams for Factory Automation, based in Norcross, Georgia.
Following a welcome session on the first evening, a series of presentations were made on day two to the entire group by Siemens management and technical thought leaders, covering the digital factory strategy and the company’s forward-thinking move to Digitalization, the current theme for the Siemens marketing message across its entire industrial platform. Key speakers were Kevin Lewis, Russell Barnes, Thorsten Julich, Bernd Raithel, Michael Steigberger, Bernd Staufer and Tom Elswick. The primary message takeaway for the group was that Digitalization will hallmark the factory of the future and SCADA will be the “digital doorway for data” in that rapid evolutionary process, as it impacts all industries, both discrete and process.
Alessandra Da Silva leading the industrial PCs workshop.
There were also presentations on cloud computing and edge computing, the constituent elements of the Digitalization trend, comprising both hardware and software elements. This discussion led directly into the program’s introduction of various new thin client IPC product offerings and the latest version of SIMATIC WinCC SCADA systems.
In addition to the technical presentations and market overviews, a very interesting end user application was detailed by end user Derek Thoma of Hop Valley Brewing, a Miller/Coors company. Thoma spoke on the marked improvements in production and product quality tracking made possible by the advanced IPC and HMI provided by Siemens, in addition to the SCADA software for process monitoring and management.
During that evening, the entire group enjoyed a genuine Texas BBQ and a good time was had by all.
Presenters at the event (starting from left): 1-Russell Barnes, 2-Johann Strobl, 3-Bernd Staufer, 4-Kevin Lewis, 5-Michael Steigberger, 6-Thorsten Julich, 7-Bernd Raithel
Day three began with a review of new IPC products and emerging technologies on the horizon from Siemens, followed by more intense product and software breakout workshops, tagged the Wisdom Series by the event coordinators.
Finally, day four offered direct consultation from the Siemens product specialists gathered at the event, including the Solutions Partners, who represent the system integrator community at Siemens, as they bring the products, application engineering, installation and service, plus related data gathering and process control products to the process industries. In addition, those interested in becoming a WinCC Specialist were offered the opportunity to take their certification test during the event.
Todd Malone presents on the topic of custom toolboxes at a Siemens workshop.
Guest instructors were present during the workshop sessions to discuss such topics as Automation for Networks, Using WinCC to Build a Toolbox, Batch Tracking Made Easier with WinCC Archives, Mindsphere and Cybersecurity, and the Industrial PC of tomorrow. Rapidly developing MindApps for performance optimization on all types of industrial manufacturing and process machines were also discussed in detail, as Siemens seeks to assist its customer base and machine builders alike to gather, process, analyze and apply relevant data. Such data allow better process control and KPI development, plus have positive uses for machine liability, insurance, warranty and even energy saving calculations.
To learn more about the event and products, please visit: usa.siemens.com/automation
Siemens Digital Factory (DF) offers a comprehensive portfolio of seamlessly integrated hardware, software and technology-based services in order to support manufacturing companies worldwide in enhancing the flexibility and efficiency of their manufacturing processes and reducing the time to market of their products.
Siemens Corporation is a U.S. subsidiary of Siemens AG, a global powerhouse focusing on the areas of electrification, automation and digitalization. One of the world’s largest producers of energy-efficient, resource-saving technologies, Siemens is a leading supplier of systems for power generation and transmission as well as medical diagnosis. With approximately 351,000 employees in 190 countries, Siemens reported worldwide revenue of $88.1 billion in fiscal 2016. Siemens in the USA reported revenue of $23.7 billion, including $5.4 billion in exports, and employs approximately 50,000 people throughout all 50 states and Puerto Rico.
Continue reading
No. 895 is a 1000°F (538°C), top loading oven from Grieve, currently used for curing composite materials in large molds at the customer’s facility. Workspace dimensions of this oven measure 168” W x 48” D x 48” H. 120 KW are installed in lncoloy sheathed tubular heating elements, while a 12,500 CFM, 10-HP recirculating blower provides horizontal airflow.
This Grieve top-loading oven features 8” thick insulated walls comprising 2” of 1900°F block and 6” of 10 lb./cf density rockwool. Other features include aluminized steel exterior, Type 304, 2B finish stainless steel interior, reinforced ¼” steel plate top, air-operated rear hinged door and wear bars at sides of workspace. Floor of workspace is reinforced for 4000 lbs. loading at removable stainless steel subway grates. Oven also features 325 CFM powered forced exhauster and access ports to allow monitoring of mold during injection.
Controls on No. 895 include a digital programming temperature controller, manual reset excess temperature controller with separate contactors, recirculating blower airflow safety switch and SCR power controller.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, Illinois 60073-2835
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese.
No. 859 is a 550°F (288°C), shelf oven from Grieve, currently used for drying powdered resin in trays at the customer’s facility. Workspace dimensions of this oven measure 44” W x 30” D x 60” H. 12 KW are installed in Nichrome wire heating elements, while a 1000 CFM, 1-HP recirculating blower provides horizontal airflow to the workload.
This Grieve oven has 4” insulated walls, Type 430 stainless steel interior and 4 independent doors for access to workspace, each opening 20-1/2” wide x 28-1/2” high. Features include 32 trays 19” wide x 29” long x 2-1/2” deep, a weekly timer to start and stop oven and a digital timer for each compartment with button and pilot light to indicate end of cycle.
Controls on the No. 859 include a digital indicating temperature controller, manual reset excess temperature controller with separate contactors, recirculating blower air flow safety switch and a 10” diameter circular chart recorder.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, Illinois 60073-2835
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese.
by Maureen Lepke
Over the past few years, social media has become increasingly mainstream in our daily lives. As of September 2017, Facebook has approximately 2.07 billion monthly users according to Facebook Stats. Twitter, on the other hand, had an average of 328 million monthly users as of the first quarter of 2017 as seen in a Forbes article. Lastly, an article from Fortune claims that LinkedIn has 500 million users as of April 2017.
While social media initially rose to popularity with teenagers as the main users, older generations have since adapted to these changing times and have incorporated social media into not only their personal lives but also into their professional lives.
More recently, businesses have realized the immense potential of having a social media presence. No longer is social media solely for interacting with friends and playing games; today, it’s opened the doors to vast possibilities for brand recognition among businesses and consumers.
In the manufacturing and industrial markets, social media can be extremely beneficial as companies in these industries rely on monthly trade publications for advertising and sharing product news with their specific audience in the hopes of generating leads. While this continues to be important to create brand awareness, social media can lend a helping hand. By using social media, a company can easily promote their brand the other 30 days out of the month.
Social media is the perfect outlet to not only promote your brand and share exciting company news but to also share breaking news and relevant topics that pertain to your company’s industry. This allows your business to become a wealthy source of information and lends a great deal of credibility to your company within the industry.
Among those benefits is the added bonus of being able to connect with a very specific, pinpointed target market that is already interested in your industry and therefore will be a possible lead. Communication is key when it comes to any business and marketing strategy. Social media is a medium of communication that lets a business interact with consumers in ways that companies have never been able to before.
The future of social media for businesses looks bright as there are plenty of ways to reach your audience and stay relevant in the minds of the consumers. It’s important to stay up-to-date as social media and technology are constantly changing and improving.
Are you “following” the social media movement? It’s about time! See what social media can do for your company. Reach out to us today for more information or with questions on how social media can have a beneficial impact on your company. We’re here to help increase your brand awareness.
https://newsroom.fb.com/company-info/
http://fortune.com/2017/04/24/linkedin-users/
Continue readingWHEN I WAS A BOY…
That’s how one of my favorite high school teachers started out many a lecture. Father Cochran taught me logic at the all-boys Catholic prep school I attended. From him, I learned Aristotle and Aquinas in Greek and Latin, plus all the modern thinking of the day. His opening set the tone, namely, encouraging us to keep all things in perspective and never forget the lessons of our youth, no matter what changed along the way.
My point? In today’s ad agency, we have technologies galore that didn’t exist just 43 years ago, when I was a…fledgling copy boy at my first ad agency, writing display classified ads on a “modern” electric typewriter for the agency that handled the American Grease Stick Company, maker of products such as SqueakEase, DoorEase and LockEase. Thrilling, I can hear you say.
Today, we offer clients social media, website development with full back-end tracking, augmented reality to enhance trade show and online experiences, Google ad word programs that capture people seeking their products and equipment, then put an ad in view online through retargeting with back-end tracking protocols, highly complex interactive blasts and conferencing options for training and press events, plus the very cool (is that still a multi-meaning adjective?) technology of mobile attraction, whereby we put a message from our client on every phone in a zip code or x-mile radius of a trade show venue. People come up to the booth and say “show me,” whereupon I smile knowingly at the client and say, “Told ya it would work!” And it does. Call me and I’ll tell you how. (Actually, one of the young guns here will do that.)
Continue readingMachine builder develops fully automated die handling system with 15,000-pound capacity to load and unload presses with staging tables for continuous production; die change time reduced from two hours to ten minutes
Beckwood twin hydraulic presses, each 1400-ton plus Quick Die Change (QDC) assembly with 15,000-pound load capacity and T-table staging devices for fully automated workflow.
Beckwood Corporation in Fenton, Missouri (St. Louis) is a leading manufacturer of custom hydraulic presses, automation systems and the Triform line of precision forming equipment. While their machinery serves a variety of industries and applications, they excel at developing robust aerospace forming technologies engineered for accuracy and repeatability. In detailing the sophistication of their machine designs for this challenging market segment, their website includes something of a company mantra, “It IS rocket science.”
One customer, a metalform fabricator and producer of various components for the commercial and military aircraft sectors, brought Beckwood their challenge. The company was seeking a turnkey package consisting of two 1400-ton hydraulic presses and two automated stamping die handling systems to load and unload the presses more efficiently than the conventional forklift and manual labor-intensive system this customer was currently utilizing. The presses and quick die change (QDC) workcells would be used to form a variety of parts in relatively low volumes, so the system to be designed needed a more automated die handling system. In addition, a 42”-diameter deep draw sheet hydroforming press with staging table was needed. Such a press would be the largest of its kind in the world, once produced.
Siemens motion control and HMI are used on the entire system, with Safety Integrated features, allowing operators to remain outside the work envelope, in full machine process and monitoring mode.
A critical part of the challenge involved the need for a QDC system with 15,000-pound capacity to feed each 1400-ton press. As Beckwood’s lead electrical engineer John Harte explains, “We conducted a thorough review with all our local die cart suppliers and all passed on the bid, citing too many obstacles on that large a load. So, as we often do, we decided to design, engineer and build the system ourselves.” The presses each had a footprint approximately 30’ square, and the QDC would need to service the presses with T-table staging devices, allowing the next die to be prepped and ready to insert upon completion of the previous run cycle.
With the degree of automation involved, Beckwood worked with the customer’s engineering staff to devise a workcell concept comprised of two 4-post presses, each with a QDC system including a cart, rack and T-table with 15,000-pound load capacity. Each press would be over 33’ in height and positioned in a 10’ deep pit.
As the customer was a longtime user of Siemens motion control and HMI, they specified this supplier for the project. Harte connected with Derek Eastep, his account manager for Siemens, and the product list for the project began to take shape. Various drives, PLCs, displays and motion controllers were specified. The latter was a critical component, as the motion controller was required to operate all press movements, as well as the motor starters, QDC integration, light curtains that protect the workcell and operators plus area scanners that maintain the integrated safety condition monitoring on the entire cell.
The system logic and data logging setup was to be done by the customer, who had considerable experience with Siemens controls, with the Beckwood team integrating the QDC and overall cell management.
The QDC operates in tandem with the two presses, using four 15HP motors to drive the lead screws on this massive die handling system. They are electrically geared through the onboard Siemens PLC to move the ram and shuttle. Additional motors and drives on the feed tables allow the next die to be positioned during press operation. When a press cycle is completed, the air bags on the feed tables lift the next die for positioning onto the QDC, then a shuttle inserts the die inside the press, with all motion controlled by the PLC. These T-tables and the QDC were designed, engineered, built and tested by Beckwood at their factory prior to shipment and installation at the customer’s facility. Both Beckwood and Siemens personnel were active in the commissioning of the entire system.
Press/QDC workcell currently utilized by a metalform fabricator in the commercial and military aircraft industries.
The PLC is a Siemens S7-1515—a robust controller that integrates function control, safety and condition display in a single module with Profinet protocol for bus communication. Through the TIA Portal and Step 7 software provided by Siemens, the end user can customize the operation of the devices remotely, integrating multiple part files and related safety commands in one controller. This “library” feature allows the end user, as they run a variety of parts during a shift, for example, to use one software package to program quickly and more efficiently. Likewise, the safety switches on the entire system are programmed through this secure and redundant safety back-up software through the TIA Portal.
All motor movements on the twin four-post presses are controlled with Siemens drive technology. In operation, the Beckwood presses with the QDC systems are expected to reduce die setup and changeover from approximately two hours to ten minutes.
As Derek Eastep from Siemens notes, “Because the end user was a longtime customer, we performed the application engineering with Beckwood and their customer, fully confident that the system would be set up and running in a relatively short time, as all parties had good familiarity with our protocols.” Harte adds, “We used the Selector, Sizer and Starter engineering tools from Siemens to spec and then commission the drives, which saved us a substantial amount of time. It made our lives a lot easier,” he muses.
The two 1400-ton presses in the workcells are Beckwood’s robust four-post frame style with replaceable, graphite-impregnated bronze bushings and solid chrome-plated posts to ensure precision ram guidance. Designed to form parts with challenging geometries in low-volume, high-mix production environments, the 42” Triform deep draw sheet hydroforming press will be the largest press of its kind in the world.
Josh Dixon, director of sales & marketing at Beckwood, says in the company video, “We hate the word ‘no’.” The success of this unique and first-of-kind press and QDC workcell, built by Beckwood with the help of its controls supplier Siemens, bears out that statement.
Due to the versatile nature of Beckwood’s “built to order” business model, their machines are engineered to serve a variety of industries. Beckwood’s extensive experience serving so many industries provides a unique vantage point that customers find incredibly valuable. They are often able to recommend process improvements that customers may have never known or considered, revolutionizing their manufacturing operations. Beyond metal forming, the company also manufactures presses used to form rubber, plastic, composites and other material substrates. The business started in 1976 and is today led by company president Jeff Debus.
For more information on this story, please contact:
BECKWOOD CORPORATION
889 Horan Drive
Fenton, MO 63026-2405
Phone: 636-343-4100
www.beckwoodpress.com
or
Siemens Digital Factory
5300 Triangle Pkwy
Norcross, GA 30092
(678) 427-8319
About Siemens USA
Siemens Corporation is a U.S. subsidiary of Siemens AG, a global powerhouse focusing on the areas of electrification, automation and digitalization. One of the world’s largest producers of energy-efficient, resource-saving technologies, Siemens is a leading supplier of systems for power generation and transmission as well as medical diagnosis. With approximately 348,000 employees in more than 190 countries, Siemens reported worldwide revenue of $86.2 billion in fiscal 2015. Siemens in the USA reported revenue of $22.4 billion, including $5.5 billion in exports, and employs approximately 50,000 people throughout all 50 states and Puerto Rico.
Continue reading
No. 892 is a 500°F (260°C), electrically heated belt conveyor oven from Grieve, currently used for curing sealant on filters at the customer’s facility. Workspace dimensions of this oven measure 18” W x 32” D x 26” H. 36 KW are installed in Nichrome wire heating elements, while a 1500 CFM, 11/2-HP recirculating blower provides vertical downward airflow to the workload.
This Grieve belt conveyor oven has an 18” long open belt loading zone and a 24” long open unloading zone. Features include a 12” long insulated, unheated entrance vestibule, 32” long insulated heat zone with recirculated airflow and 12” long insulated, unheated exit vestibule. Additional features include 12” wide, 1” x 1” stainless steel flat wire conveyor belt with 1/4-HP motor drive, variable from 0.6 to 11.7 inches per minute, 4” insulated walls and aluminized steel interior and exterior. The oven also has an integral leg stand with casters.
Controls on the No. 892 include a digital indicating temperature controller, 10” diameter circular chart recorder and SCR power controller.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, Illinois 60073-2835
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese.