Contact us today:
(847) 934-4500
tdaro@bernardandcompany.com
Contact us today:
(847) 934-4500
tdaro@bernardandcompany.com
No. 840 is a 500oF electrically-heated, two-zone vertical airflow cabinet oven from Grieve, currently used to dry coatings on fishing line at a customer’s facility.
Workspace dimensions of the top heating chamber measure 36” wide x 12” deep x 36” high, while the lower chamber is 36” wide x 12” deep x 60” high. 30KW installed in Incoloy-sheathed tubular heating elements (15KW per chamber) provide the heat, while two 1000 CFM, 1-HP recirculating blowers provide vertical airflow in each heating zone
This Grieve oven has aluminized steel interior and exterior, plus 4” insulated walls throughout. Eight ¾” diameter ports through the roof and floor of each heating zone allow the workload to pass through.
Safety and control equipment on No. 840 include digital indicating temperature controllers, manual reset excess temperature controllers with separate contactors and recirculating blower airflow safety switches for each heating zone..
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 946 is a 1000°F, electrically-heated vertical airflow walk-in oven from Grieve, currently used for curing coatings on titanium screens. Workspace dimensions measure 72”W x 156”D x 96”H. 360kW installed in Incoloy-sheathed tubular heating elements provide the power, while a 24,500 CFM, 20 HP recirculating blower provides a vertical downward airflow to the workload.
This Grieve oven features 8” insulated walls, Type 304L, 2B finish stainless steel interior, stainless steel exterior with #4 brushed finish and 6” insulated floor with integral truck wheel guide tracks for easy loading and unloading.
No. 946 has double doors, front and rear, each with inner and outer door gaskets. The inner gasket seals against the door plug, while the outer gasket seals directly against the front of the oven.
A removable top-mounted heat chamber (shown removed in photo) is also provided.
Safety equipment is onboard for handling flammable solvents, including explosion-venting door hardware.
Also featured on this Grieve walk-in oven are digital programming temperature controller, manual reset excess temperature controller with separate contactors, recirculating blower airflow safety switch and SCR power controller.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP