Contact us today:
(847) 934-4500
tdaro@bernardandcompany.com
Contact us today:
(847) 934-4500
tdaro@bernardandcompany.com
No. 920 is a gas-heated, 500°F walk-in oven from Grieve, currently used for curing various rubber parts. Workspace dimensions measure 52”W x 48”D x 48”H. 350,000 BTU/hr. are installed in a modulating gas burner, while a 4,200 CFM, 3-HP recirculating blower provides horizontal airflow to the workload.
This Grieve walk-in oven features a stainless steel exterior with #4 brushed finish, Type 430 stainless steel interior with continuously backwelded seam construction and 4” thick insulated walls. A top-mounted heating chamber is provided to conserve floor space, while a motorized damper on the exhaust accelerates the unit’s cooling. Oven exhaust discharges into a Type 304 stainless steel scrubber with brass piping. The scrubber uses recirculated water, sprayed by a 1-1/2-HP pump into the exhaust, to remove particulates.
Workloads are carried on the unit’s dual shelf trucks, each with channel supports on 3-1/2” centers. A transfer dolly is provided to carry two trucks and features oven-to-dolly and dolly-to-truck latches for easy loading / unloading. The oven has a 4” insulated floor with two pairs of truck wheel guide tracks built atop the floor.
No. 920 has all safety devices required by IRI, FM and NFPA Standard 86 for gas-heated equipment, including a 650 CFM, 1/2-HP powered forced exhauster. This oven also features a digital programming temperature controller, 10” diameter circular chart recorder and fused disconnect switch.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 909 is a gas-fired, 5000F walk-in oven from Grieve, currently used for curing various rubber parts. Workspace dimensions measure 30”W x 48”D x 57”H and the oven is supplied with a shelf truck, equipped with shelf supports on 3 ½” centers.
175,000 BTU/hr. are installed in a modulating natural gas burner. A 2,000 CFM, 2-HP recirculating blower motor provides horizontal airflow from a top-mounted heat chamber. The unit features 4” thick insulated walls, a stainless steel exterior with #4 brushed finish and a Type 430 stainless steel interior with continuously backwelded seam construction. The oven floor has 4” insulation plus truck wheel guide tracks built-in.
Motorized dampers on the air intake and exhaust provide accelerated cooling. The oven exhauster discharges into a scrubber unit which utilizes recirculated water, sprayed by a 1 ½-HP pump into the exhaust to remove particulates. This scrubber is constructed of Type 304 stainless steel with brass piping.
No. 909 also includes a 10” diameter circular chart recorder, ten permanently mounted survey thermocouples connected to a jack strip at the control panel and a fused disconnect switch. All safety devices required by IRI, FM and NFPA Standard 86 for gas-heated equipment are onboard, including a 325 CFM, 1/3-HP powered forced exhauster.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP