Contact us today:
Machine builder develops fully automated die handling system with 15,000-pound capacity to load and unload presses with staging tables for continuous production; die change time reduced from two hours to ten minutes
Beckwood Corporation in Fenton, Missouri (St. Louis) is a leading manufacturer of custom hydraulic presses, automation systems and the Triform line of precision forming equipment. While their machinery serves a variety of industries and applications, they excel at developing robust aerospace forming technologies engineered for accuracy and repeatability. In detailing the sophistication of their machine designs for this challenging market segment, their website includes something of a company mantra, “It IS rocket science.”
One customer, a metalform fabricator and producer of various components for the commercial and military aircraft sectors, brought Beckwood their challenge. The company was seeking a turnkey package consisting of two 1400-ton hydraulic presses and two automated stamping die handling systems to load and unload the presses more efficiently than the conventional forklift and manual labor-intensive system this customer was currently utilizing. The presses and quick die change (QDC) workcells would be used to form a variety of parts in relatively low volumes, so the system to be designed needed a more automated die handling system. In addition, a 42”-diameter deep draw sheet hydroforming press with staging table was needed. Such a press would be the largest of its kind in the world, once produced.
A critical part of the challenge involved the need for a QDC system with 15,000-pound capacity to feed each 1400-ton press. As Beckwood’s lead electrical engineer John Harte explains, “We conducted a thorough review with all our local die cart suppliers and all passed on the bid, citing too many obstacles on that large a load. So, as we often do, we decided to design, engineer and build the system ourselves.” The presses each had a footprint approximately 30’ square, and the QDC would need to service the presses with T-table staging devices, allowing the next die to be prepped and ready to insert upon completion of the previous run cycle.
With the degree of automation involved, Beckwood worked with the customer’s engineering staff to devise a workcell concept comprised of two 4-post presses, each with a QDC system including a cart, rack and T-table with 15,000-pound load capacity. Each press would be over 33’ in height and positioned in a 10’ deep pit.
As the customer was a longtime user of Siemens motion control and HMI, they specified this supplier for the project. Harte connected with Derek Eastep, his account manager for Siemens, and the product list for the project began to take shape. Various drives, PLCs, displays and motion controllers were specified. The latter was a critical component, as the motion controller was required to operate all press movements, as well as the motor starters, QDC integration, light curtains that protect the workcell and operators plus area scanners that maintain the integrated safety condition monitoring on the entire cell.
The system logic and data logging setup was to be done by the customer, who had considerable experience with Siemens controls, with the Beckwood team integrating the QDC and overall cell management.
The QDC operates in tandem with the two presses, using four 15HP motors to drive the lead screws on this massive die handling system. They are electrically geared through the onboard Siemens PLC to move the ram and shuttle. Additional motors and drives on the feed tables allow the next die to be positioned during press operation. When a press cycle is completed, the air bags on the feed tables lift the next die for positioning onto the QDC, then a shuttle inserts the die inside the press, with all motion controlled by the PLC. These T-tables and the QDC were designed, engineered, built and tested by Beckwood at their factory prior to shipment and installation at the customer’s facility. Both Beckwood and Siemens personnel were active in the commissioning of the entire system.
The PLC is a Siemens S7-1515—a robust controller that integrates function control, safety and condition display in a single module with Profinet protocol for bus communication. Through the TIA Portal and Step 7 software provided by Siemens, the end user can customize the operation of the devices remotely, integrating multiple part files and related safety commands in one controller. This “library” feature allows the end user, as they run a variety of parts during a shift, for example, to use one software package to program quickly and more efficiently. Likewise, the safety switches on the entire system are programmed through this secure and redundant safety back-up software through the TIA Portal.
All motor movements on the twin four-post presses are controlled with Siemens drive technology. In operation, the Beckwood presses with the QDC systems are expected to reduce die setup and changeover from approximately two hours to ten minutes.
As Derek Eastep from Siemens notes, “Because the end user was a longtime customer, we performed the application engineering with Beckwood and their customer, fully confident that the system would be set up and running in a relatively short time, as all parties had good familiarity with our protocols.” Harte adds, “We used the Selector, Sizer and Starter engineering tools from Siemens to spec and then commission the drives, which saved us a substantial amount of time. It made our lives a lot easier,” he muses.
The two 1400-ton presses in the workcells are Beckwood’s robust four-post frame style with replaceable, graphite-impregnated bronze bushings and solid chrome-plated posts to ensure precision ram guidance. Designed to form parts with challenging geometries in low-volume, high-mix production environments, the 42” Triform deep draw sheet hydroforming press will be the largest press of its kind in the world.
Josh Dixon, director of sales & marketing at Beckwood, says in the company video, “We hate the word ‘no’.” The success of this unique and first-of-kind press and QDC workcell, built by Beckwood with the help of its controls supplier Siemens, bears out that statement.
Due to the versatile nature of Beckwood’s “built to order” business model, their machines are engineered to serve a variety of industries. Beckwood’s extensive experience serving so many industries provides a unique vantage point that customers find incredibly valuable. They are often able to recommend process improvements that customers may have never known or considered, revolutionizing their manufacturing operations. Beyond metal forming, the company also manufactures presses used to form rubber, plastic, composites and other material substrates. The business started in 1976 and is today led by company president Jeff Debus.
For more information on this story, please contact:
889 Horan Drive
Fenton, MO 63026-2405
About Siemens USA
Siemens Corporation is a U.S. subsidiary of Siemens AG, a global powerhouse focusing on the areas of electrification, automation and digitalization. One of the world’s largest producers of energy-efficient, resource-saving technologies, Siemens is a leading supplier of systems for power generation and transmission as well as medical diagnosis. With approximately 348,000 employees in more than 190 countries, Siemens reported worldwide revenue of $86.2 billion in fiscal 2015. Siemens in the USA reported revenue of $22.4 billion, including $5.5 billion in exports, and employs approximately 50,000 people throughout all 50 states and Puerto Rico.Continue reading
Permanent corrosion protection is more effective and less expensive than standard heavy-zinc galvanize
A leading coil coater and manufacturer of proprietary coating chemistries has recently introduced InterCoat®ChemGuard, a new type of corrosion protection for galvanized steel.
InterCoat®ChemGuard uses a new type of coating technology that utilizes covalent bonds and enhances the effectiveness of zinc and substantially improves corrosion protection on galvanized steel. Standard practice to protect metal from corrosion for approximately the last 70 years has been to coat it with zinc. Heavier zinc coatings have normally been applied to provide longer protection. This was the industry standard practice, until now.
InterCoat®ChemGuard, instead, reacts with the zinc to form a permanent, covalent bond on the surface of the metal. The product is applied over a light layer of zinc, which reacts with the zinc to dramatically improve its corrosion protection properties. The bond which is formed at the molecular level cannot be washed or worn off. This is different and more effective than the typical barrier coating. This revolutionary process allows bending, stamping, post-painting and even shearing, while providing self-healing characteristics that help protect newly exposed zinc that naturally occurs during secondary processing.
InterCoat®ChemGuard is a major development for any user looking to extend the corrosion resistance of galvanized steel. The product is RoHS compliant and continues to protect during stamping, roll forming, shearing and is weldable. With a low coefficient of friction, it actually enhances these processes. InterCoat®ChemGuard is designed to be applied on the galvanize line or, for custom formulas, by the original coil coater and developer of this unique compound.
InterCoat®ChemGuard offers significant cost savings because it allows for lighter zinc to form the bond. It is not necessary to apply heavy zinc; it reduces the need for zinc coatings heavier than G30, in many applications on the market today. The product also eliminates the need for temporary corrosion protection coatings, often used in shipping and materials storage, including hexavalent chrome, a known carcinogen, making it more environmentally friendly for all building, architectural, transportation and consumer appliance applications.
It is applicable to many industries, including automotive, aerospace, construction, electrical conduit, wall studs, furniture, fixtures, appliances, outdoor and highway railing, agricultural, lawn and garden and other products using galvanize.
For more information on this product, please visit the website at: www.lowerzinc.com
To discuss, or arrange a trial, please contact:
Market leader in live tooling can supply complete range of products for new Haas BMT Turret
Heimatec, a market leader in live tooling for the North American machine tool industry, announced today that it has an extensive line of tooling available for the new Haas BMT turret.
The line includes a variety of driven tools (axial and radial drilling & milling heads) as well as static tool holders. Heimatec also offers specialty tools for this turret including multi-spindle, adjustable angle, and speed multipliers. For detailed download catalogs, please see the Heimatec website at: http://heimatecinc.com/catalogs/
Heimatec already offers the most complete line of live tools available in the machine tool industry today, with over 40,000 designs in its database. These BMT turret tools are already proven and in production allowing Heimatec to provide immediate support and the most innovative tooling technology possible.
Heimatec North American distribution headquarters are located in Prospect Heights, Illinois (Chicagoland area) with world headquarters and all manufacturing based in Germany. A team of manufacturers’ representatives covers the North American market for Heimatec.
For more information please contact:Continue reading
Pomona, California – NOARK Electric, a low-voltage electrical product manufacturer, announces its UL 489 B1NQ miniature circuit breaker is now a direct replacement for the common MCB when paired with the optional surface mount. This recyclable, quick-connect breaker is available in three curves (B, C and D), ranges from 0.5 to 63 A and is compliant with UL/CSA/IEC standards for branch circuit protection in commercial and residential applications.
While designed and engineered for the HVAC market, the HACR compatible MCB is also suited for a host of industrial applications and other component sub-assembly designs. The current-limiting B1NQ is thermal-magnetic and protects against short circuit and overload conditions. The 1- and 2-pole breaker, offered at 120/240 Vac provides optimum and efficient protection for branch and control circuits. NOARK offers exceptional value with local support and inventory for a wide range of UL 508A panel designs, all backed by the industry’s first 5-year limited warranty.
The B1NQ and surface mount attachment saves customers substantial time and money in both upfront cost and installation time. The surface mount is an exact match to the existing bolt hole pattern of the common, competing MCB and requires no additional drilling. With the surface mount in place, the B1NQ can be removed in as little as 7 seconds – over 300% faster than the common MCB. Installation takes seconds and simply requires placing the B1NQ onto the surface mount and clicking into place. Quick removal is possible by pulling down the clips with a standard screwdriver. The removable terminal shrouds offer the installer unmatched access to the terminals. This feature saves users valuable time during installation and helps reduce the chance of wiring errors. With more space available, technicians in the field and factories are able to work quickly and accurately. Additional accessories are available including Comb Bus Bars and Rotary Handles.
NOARK Electric (North America), located in Pomona, CA, is a global electrical component and intelligent control system supplier. The company is establishing a representative and distribution network to serve its primary markets, which include the building trades and electric panel board builders in various industries. As a global supplier, NOARK currently operates four R&D centers, three distribution centers, 15 office locations and employs over 1,000 associates. Sales currently exceed $2 billion worldwide.
For more information on this product, consult your local sales representative or email: firstname.lastname@example.orgContinue reading
The demands for prototype, tool and mold making are increasing. Only those who can supply high quality output, quickly and flexibly, can succeed against the powerful competition worldwide. Zimmermann is responding to this trend with the new FZU. This 5-axis gantry milling machine is not only extremely compact but, thanks to its thermo-symmetrical design and accuracy, it also provides the ideal entry point to the Zimmermann machine line with maximum productivity. Plastics, casting resins such as Ureol and aluminum are particularly suitable for machining. “This development will enable us to close the gap in the lower weight class,” states Frieder Gänzle, General Manager and Partner at Zimmermann in Germany.
“The basic expectations, which prototype, tool and mold makers need to meet today, have not necessarily changed over the years, they have simply grown,” sums up Frieder Gänzle. Customers in the automobile industry, he notes, especially expect components with almost perfect surface finishes and ever higher accuracies. Manufacturers introduce new models or variants to the market at ever shorter intervals. Whereas prototype, tool and mold makers could previously plan in the longer term, they must respond today to inquiries considerably faster.
“We cultivate a very special relationship with prototype, tool and mold makers,” says Gänzle. “Together, we have evolved consistently in recent years. We are very appreciative of our strong business in this sector.” Zimmermann is continuously exchanging technology information with its user base. In discussions, it has become clear that this sector requires powerful, compact machines with maximum productivity and open time. And, importantly, Zimmermann must offer an attractive price/performance ratio, while meeting all these requirements. “We have evolved even further towards heavy-duty cutting, over the years,” reports Gänzle. “As a result, even the smallest machine in our portfolio, the FZ33 compact, has become more popular. We have continuously pushed it upwards from a technological point of view.” Its focus is on aluminum cutting, but steel can also be machined. This enables Zimmermann to offer customers a very efficient, flexible and space-saving machine, while the corresponding design improvements have also had an effect on the price. “The requirement we were presented was for an entry-level model which rounds off our program at the lower price point,” explains Gänzle. The result is the FZU, a 5-axis gantry milling machine which is optimized for weight and stability.
Pre-assembled machine concept
In contrast to the established FZ33 and other machines that Zimmermann offers today, the company is taking a different path with the FZU. “We can narrow down the special features of this gantry machine to three main characteristics,” describes Gänzle. The first point: “We are following the trend towards modern manufacturing machines and designing them as space-saving, pre-assembled units.” This means Zimmermann assembles the machines in-house and can then transport them to the customer by truck or ship without having to dismantle them. Onsite, they are ready for use in a very short commissioning time; erection and start-up require minimum effort. For the customer, this means quickly available machines which can be installed without constructing foundations. “In the design, we have kept to the usual transport sizes. At the same time, the new FZU achieves a remarkable working range for its size,” explains Gänzle.
It is important to match the machine to the required dynamics. Adverse environmental conditions and long machine running times necessarily give rise to thermal expansion effects. In spite of the customers’ increased accuracy requirements, the machine must always achieve outstanding surface finishes. The Zimmermann engineers have therefore designed the FZU gantry machine to be thermo-symmetrical. This means that the milling spindle, guides and other accuracy-determining components are arranged so that their heating is either compensated or they can expand in uncritical directions. “This is the second important characteristic,” emphasizes Gänzle. The base frame consists of a steel welded construction which forms a continuous U-shape. The machine gantry’s centrally guided Z-slide has an octagonal section – and not a rectangular one like comparable machines – which makes it particularly stable. Thanks to its design, it therefore has impressive rigidity for its size. “With a weight of approximately 35 tons, a length of 3,500mm, width of 7,500mm and a height of just under 5,000 mm, we have been able to build a light and compact machine,” says Gänzle.
In-house head implemented throughout
The third characteristic relates to the new VH10 milling head, which achieves an extremely high power density. “This new development has enabled us to reassess our portfolio,” reports Gänzle. This is because the VH10 head will replace the VH12, which is not a Zimmermann product. Alongside the VH20, VH30 and VH60, the VH10 is now the smallest head in the range. Users will also benefit from the fact that Zimmermann has suitable spare heads in stock and can supply them on request in the event of stoppages, for example, due to a crash. “We strive to respond quickly and provide the customer with optimum support,” emphasizes Gänzle.
Thanks to its slender design, the VH10 spindle head has only minimal interference contours. Compared to the VH12, it achieves almost double the clamping force. This is due to the fact that Zimmermann fits two side cheeks instead of one onto the unit. The VH10 is therefore considerably more stable in operation. In order to minimize throughput times, a powerful 34 kW spindle with a maximum speed of 24,000 rpm is used in the milling head as standard. “The FZU is therefore ideally suitable for the materials typically found in this business sector, such as Ureol, clay and aluminum. In the future, we will also use the new milling head in larger machines on which processers can produce one-to-one models – for example, on our FZ37,” says Gänzle.
Standardized and yet individual
In order to provide a high-quality machine at an attractive price, the designers at Zimmermann have turned their attention to remaining competitive with regard to price through increased component standardization, while at the same time addressing individual customer requirements. As with all machines produced, Zimmermann therefore also relies on a modular system with the FZU. Among other things, this approach enables different size variants and power levels to be produced. There are also numerous equipment options which offer the customer maximum flexibility.
Zimmermann is therefore able to provide a very efficient solution with the new FZU. It is often the little things that give rise to success and customer satisfaction. “We place great importance on details – an aspect which cannot always be measured in the numbers,” explains Gänzle, who cites two examples: “For instance, the machining area is fully clad with stainless steel sheets in order to guarantee maximum resistance to abrasion. The FZU is also the first gantry milling machine to be equipped with our innovative, new NXP 24-inch multitouch controller, which is already used on our FZH horizontal machining center.” Another increasingly important topic is ergonomics. The door is divided asymmetrically to enable components to be easily fed to the machine. A small, easy-to-open door leads into the machining area, while the large door is used for loading. Operators therefore have a relatively large field of view, rapid access to the machining area and ample space for loading – ergonomic advantages which are not to be underestimated. Another detail is that a cabinet has been installed directly in front of the FZU. “This was the idea of one of our designers,” says Gänzle. “The tables, which users in the various plants position in front of the machines to place their accessories and service tools, caught his attention. With our solution, everything which is part of day-to-day operations can be safely stowed close at hand within the machine.” Added to this, there are extraction equipment and special chip management systems. “It is often the simple ideas which make the machine operator’s everyday tasks much easier,” sums up Gänzle.
To provide the best possible support to businesses, Zimmermann concentrates on high-quality and reliable service in close proximity to the customer. After all, this is exactly what characterizes a good relationship between supplier and user. “Customers expect high availability over the entire system lifecycle,” says Gänzle. “We provide comprehensive machine care.” This includes a customer hotline, by means of which users can reach a competent contact person, even outside of normal working hours, as well as a remote diagnosis system that allows a rapid response in an emergency. If mechanical components are defective or malfunction, the machine builder usually guarantees immediate shipment from its factory. In addition, the application engineers work together with the customer to optimize each individual combination of heads, spindles, tools and clamping equipment for the machines. Zimmermann therefore not only sells machines, but also complete solutions. Plans are in process for further upgrades to the stocking and service personnel staff in North America, as well. Zimmermann recently opened a new facility in Wixom, Michigan, near Detroit.
Goal: To be technologically out in front
“We don’t want to be chasing trends; instead, we want to help shape the market,” says Gänzle. “Basically, we therefore aspire not to do the same things as our competitors.” To be technologically out in front, the machine builder never stands still with regards to machine development. The FZU is therefore being continuously optimized – without at the same time losing sight of the price/performance ratio. There appears to be substantial market interest in these machines, according to company research. The initial discussions with users were highly promising. “We are confident of meeting our customers’ requirements with this new development, both in Germany and internationally,” says Gänzle. The statement that the concept of the FZU could be transferred to the other machines in the program underlines how convinced he is of this new solution. Zimmermann will be presenting the machine to a specialist audience at WESTEC 2017, CMTS 2018 AMB in September, 2018. As further indication of emerging market interest, three users have already decided to purchase this new gantry milling machine.
About the company
For more information on this development, please contact the North American headquarters:
Universities and technical schools trying to keep up with advances in digital manufacturing often find themselves behind industry. However, I was privileged to visit one university, the University South Carolina, which will now be an important exception. Founded in 1801, USC is one of the oldest universities in the US with a history of creating the most innovative learning programs dating back to its first curriculum obtained from Oxford University. Today, USC is establishing a one of a kind Digital Factory Lab that combines technology and coolness to inspire and educate its students.
This past week, Siemens announced a partnership to help the University of South Carolina to accomplish this goal with an in-kind grant of hardware and software. “Welcome to Brain Power USA! Siemens is investing $628 million in high tech training for 4th industrial revolution jobs in South Carolina,” said Henry McMaster, South Carolina Governor. By providing students with this hands-on experience on software and hardware across USC’s engineering curriculum and in research programs, Siemens is helping prepare a highly-skilled STEM workforce for the advanced manufacturing industry, including the aerospace industry, which has experienced an 11.4% employment growth rate in South Carolina since 2010.
Ramy Harik is one of the professors at USC and he told me that these new resources will be put to good use. Already his students have been involved in working with composites, designing new ways of analyzing data for the helicopter AH-64 Apache airframe and developing insights into that aircraft’s mechanical operation for the Army. More innovations are sure to come. For instance, beginning this fall students will also be able to pursue a major in aerospace engineering.
In recent years, the state of South Carolina has become a magnet for sophisticated manufacturing particularly in aerospace, automotive and tire. As a result of working with these companies to deploy high-tech manufacturing and by supporting vocational learning in the state through USC’s College of Engineering and Computing and the McNAIR Center for Aerospace Innovation and Research, USC has grown into a major research university. Specifically, the McNAIR Center is aligned with two dozen educational and government partners, and a group of industry partners that include The Boeing Company, Fokker Aerostructures, KUKA Robotics, Ingersoll Machine Tools, Gulfstream and more.
The recent gift by Siemens to University of South Carolina will contribute to the state’s overall goal to become the smartest manufacturing state in the United States. I know this is not only important to the Governor of South Carolina, but also to the USC President Harris Pastides who said, “We’re proud that our researchers and students at the College of Engineering and Computing, McNAIR Aerospace Center and the entire USC system, will play a role in discovering new manufacturing technologies and will be better prepared to take on the jobs of tomorrow in South Carolina and beyond.”
To date, South Carolina’s business, education and state government partnerships have created jobs for more than 55,000 South Carolinians in the larger aerospace industry. As Raj Batra, President, Siemens Digital Factory Division, U.S., said, “Aerospace companies throughout South Carolina are heavily reliant on automation and digitalization as well as well-trained employees. Our partnership with the University of South Carolina will provide valuable experiential training with both software and hardware, providing the next generation workforce with the skills they need to be successful.”
Far from lagging, educators in South Carolina are working hard to stay out front. While I was at dinner, USC’s Hossein Haj-Hariri, Dean of the College of Engineering and Computing, told me “We are going to work very hard to make this the best investment that Siemens has ever made.” I am proud to be part of a company that will match that enthusiasm and make this a program known for enabling students to be competitive for jobs throughout the world.
Governor Henry McMaster, we are ready to help you build the workforce of tomorrow.
Siemens Industry, Inc.
About Siemens USA
Siemens Corporation is a U.S. subsidiary of Siemens AG, a global powerhouse focusing on the areas of electrification, automation and digitalization. One of the world’s largest producers of energy-efficient, resource-saving technologies, Siemens is a leading supplier of systems for power generation and transmission as well as medical diagnosis. With approximately 348,000 employees in more than 190 countries, Siemens reported worldwide revenue of $86.2 billion in fiscal 2015. Siemens in the USA reported revenue of $22.4 billion, including $5.5 billion in exports, and employs approximately 50,000 people throughout all 50 states and Puerto Rico.
Low-cost kits allow easy-to-install, direct mounting of G120C Compact and G120 PM240-2 modular drive
Siemens announced today the availability of wall-mounting kits for its Sinamics G120C and G120 PM240-2 modular drives. These low-cost kits allow easy, fast installation of the drives and conform to NEMA 1 and UL Type 1 standards for interior applications. These wall-mount kits are designed in accordance with UL 61800-5-1 standards for AC drives.
Available in power ranges from ½ to 200 hp and voltages from 230V to 690V, the kits offer streamlined, compact design for use with all drive frame sizes of the corresponding Siemens drive units. Each kit provides best-in-class space-savings and direct access to the drive-mounted operator panel for simple commissioning, condition monitoring and even troubleshooting.
The new kits accommodate all G120C, PM240-2 and PM240P-2 power modules, control units and operator panels in the Sinamics drive family. Standardized designs permit efficient side-by-side mounting with minimal clearance, while multiple conduit knockout holes allow separate power, motor, I/O and network cabling.
Seven kits are currently available to fit all drive units from AA to F frame sizes.
For specific product information, please visit: www.usa.siemens.com/sinamics-g120
Siemens Digital Factory (DF) offers a comprehensive portfolio of seamlessly integrated hardware, software and technology-based services in order to support manufacturing companies worldwide in enhancing the flexibility and efficiency of their manufacturing processes and reducing the time to market of their products.
Siemens Corporation is a U.S. subsidiary of Siemens AG, a global powerhouse focusing on the areas of electrification, automation and digitalization. One of the world’s largest producers of energy-efficient, resource-saving technologies, Siemens is a leading supplier of systems for power generation and transmission as well as medical diagnosis. With approximately 351,000 employees in 190 countries, Siemens reported worldwide revenue of $88.1 billion in fiscal 2016. Siemens in the USA reported revenue of $23.7 billion, including $5.4 billion in exports, and employs approximately 50,000 people throughout all 50 states and Puerto Rico.Continue reading
Information-packed website features complete line of standard, machine brand specific and custom tooling
Heimatec, a market leader in live tooling for the North American machine tool industry, announced the rollout of its new website at www.heimatecinc.com.
The new site offers an in-depth look at the company’s extensive lines of standard and machine brand tooling, including the new Tecnicrafts line of collets and guide bushings, specifically designed for the Swiss machine tool market.
The site includes dozens of downloadable PDF catalogs, as well as an online tool search feature and videos of various live tool demonstrations. A “Contact” page offers customers the option to inquire directly from the site, and easy access to local manufacturer’s representative information. The site is easy-to-navigate and is mobile phone friendly.
Also included in the website is a dropdown section on custom designed tooling, which Heimatec offers in addition to its standard tooling and machine brand specific line. Tooling experts work directly with customers to design solutions to suit specific requirements for all CNC lathes, helping to solve the most challenging applications in multiple markets served by the company.
Heimatec tools offer the highest precision and most advanced technology available in the machine tool accessory market. The company is acknowledged as a world leader in live tools, angle heads and multi-spindle drill heads. With over 40,000 designs in its database, Heimatec offers the widest range of live tooling in the industry.
Heimatec North American distribution headquarters are located in Prospect Heights, Illinois (Chicagoland area) with world headquarters and all manufacturing based in Germany. A team of manufacturers’ representatives covers the North American market for Heimatec.
For more information please contact:Continue reading
My name is Ioana and I’ve been a part of the Bernard & Company team for almost three years. My activities as a marketing information specialist help our clients increase their profits and become better-known within their industries.
One of my primary duties is to read magazines for our clients’ PR. Once identified, the appearances are scanned and archived online. When one of our clients meets with us to talk about the results of their PR campaign, they are presented with magazine clippings and online access to PR that appeared both online and in print. This benefits our clients in two ways. First, clients like Grieve and Suhner, who sell their products in many markets, see which magazines are most responsive to their PR. Secondly, it is very helpful for them to see their ROI. Some clients consistently realize ROI in the 15-20:1 range, depending on the quantity of releases, the occasion of success stories, and the breadth of their master media list. We have clients who sell to very limited markets such as forge, foundry, tire and rubber molding, while others sell power tools, electric motors and industrial heat processing equipment to almost every industry.Continue reading
New technologies in honing, coatings, coolants, 3D measurement and digital factory solutions were presented by panel of industry experts; attracted 80 attendees
June 7, 2017 – Gehring held its 2017 Honing Conference and Workshops event on May 10-11, 2017 at the Inn of St. John’s in Plymouth, Michigan. The conference and workshops brought together experts from the global industry to discuss and propose solutions to advanced manufacturing challenges in surface finish technology applications. A total of 80 attendees, most from the automotive primes and Tier One suppliers, were treated to two days of learning, networking and fun.
President of Gehring in the USA, Roger Cope, gave the opening remarks to kick off the event. He noted this was the 91-year anniversary of Gehring in Germany and that the company has had a manufacturing footprint in the USA for 41 years. An R&D facility in Livonia, Michigan was established several years ago to meet the demand for specialized honing process development, consulting and the rapid rise in demand for Gehring contract and prototype honing services. He further mentioned that Gehring has diversified its market focus in the last several years to include the defense sector and, in that arena, Livonia serves as an ITAR-compliant facility. The “One Gehring” theme codifies the global focus of the company, as it seeks to serve a global customer base, Cope said.
Dr. Wolfram Lohse, CTO of the Gehring Group then took the floor and observed, “Part of our new business mission and focus globally is our desire to enhance customer and industry knowledge through the Gehring Academy for honing education, training, consulting and support in helping manufacturers implement and use our advanced honing technologies to their advantage, specifically to meet impending CAFE emissions regulations. We seek a partnership focus with key clients while retaining the highest level of integrity in handling confidential projects.” He discussed the drive to sustainability – another Gehring focus for the future. Partnerships with other key market specialists at this event, such as Oerlikon Metco AG, Nanofocus and Siemens, have been developed to produce a comprehensive resource for the market, with multiple sources of expertise relevant to surface finish technology.
Cope concluded his remarks by noting that Gehring is now a “one-stop shop” for all elements of the honing process – machines, tools, gauging, automation, rework, abrasives, R&D – with global support for global production platforms.
Gehring’s Director of R&D, Michael Schaefer, commented, “Gehring was honored to host this first unique conference, dedicated to Advanced Honing and Surface Finish technology, in the USA and to provide a high level technical and networking platform for professionals in this field with the leading manufacturers in the automotive and other industry sectors.”
During the conference, these presentations and workshops were conducted by industry experts:
-Gehring L.P. and Gehring Technologies GmbH, Michael Schaefer and Dr. Wolfram Lohse, “Advanced Honing Technologies Presentations”
-Oerlikon Metco AG, Wohlen, Dr. Peter Ernst, “Surface Enhancement with Thermal Spray Coatings”
-NanoFocus, Dr. Christian M. Wichern, “3D Surface Measurement of Cylinder Bore and Liners – Advantages and Challenges”
-Quaker Chemical, Frank A. Robinson Jr., “Chemistry and Functions of Honing and Coolant Applications”
-Gehring Technologies GmbH, Marcell Wardin, “Form Honing Cylinder Bores – from Development to Mass Production”
-Gehring Technologies GmbH, Dr. Wolfram Lohse, “Digital Solutions at Gehring”
-Siemens Digital Factory, Dr. Stephan Ihmels, “Mindsphere Application in Large Scale Automotive Production Scenarios”
80 process and manufacturing engineering personnel responsible for surface finishing in automotive, hydraulics, aerospace & defense part applications, including plant managers, production managers and R&D specialists attended this Gehring conference.
The technical program was supplemented by networking events such as the pre-conference “Infinity “chartered dinner cruise with entertainment on the Detroit River and post conference golf, all of which were enjoyed by the attendees.
For more information on this event, please contact:Continue reading