(847) 934-4500

Contact us today:

Tag Archives: REP

The rubber injection molding machine making REP technology accessible to all!

 

In the little world of rubber injection molding machines, the name of REP has been recognized for years as a synonym for performance and high technology. REP presses are known for being reliable, durable and adapted to the most sophisticated processes.

However the drawback of such reputation is that some customers think they cannot afford REP technology or don’t need advanced features knowing well they are unnecessary for their simple parts production.The G10 Core line was designed to target these customers’ needs.

Presented for the first time at the end of 2016, much less expensive than the G10 Extended, the G10 Core meets the needs of lean manufacturing, for uncomplicated and standard processes, while delivering the usual REP quality and reliability.

The G10 Core is available with clamping forces from 1 600 to 5 100 kN : V410 Core, V510 Core and V710 Core.

These machines feature all of the REP technology at optimized cost. The G10 Core is a G10, it has the same patented injection unit as the G10 Extended with separate injection and plasticization functions. Unlike other so-called budget machines, it is CE-certified . For customers who need simple solutions without stripping kit, process control customization or other particular features, it is the ideal solution!


For more information on this announcement, please contact:
REP Corporation
8N740 Tameling Court
Bartlett, IL 60103-8146
Phone: 847-697-7210
www.repinjection.com
tgraham@repcorp.com
Attention: Tim Graham, President.

Continue reading

REP Unveils New Machines, Technology at ‘K 2016

Responding to advancements in machine design and expanded market opportunities, industry leader in rubber injection presses adds to lineup

microjectREP international is preparing for the K2016 show
The largest plastics and rubber industry companies will be present in October for the “K Show”, held once every three years in Düsseldorf. As the leading manufacturer of rubber injection molding machines, REP international will exhibit their latest products (Hall 14 Booth B57).

G10 Core and G10 Extended Infinitely Smart!
New developments are announced in the G10 range with two new product lines of rubber injection molding machines, G10 Core and G10 Extended, highly adapted to specific customer needs in the rubber market.

The G10 Core machines are presses with all core functionalities, tailored to uncomplicated processes, available on the mid-range category (160 to 500t). A V410 Core will be running at K2016.
This machine is REP expertise at an optimized cost: equipped with a REP patented injection unit, a sturdy and ergonomic closing unit and a powerful process-control, bearing CE-certification, G10 Core presses are intended for customers who want economical, practical solutions to their rubber molding challenges.

The G10 Extended machines are presses with a clamping force from 160 to 1,000 tons, best suited to heavy-duty processes. This range extends even further the performance of the previous generations: energy efficiency, enhanced productivity, improved ergonomics and maintainability, plus smart technologies! A G10 Extended, in the bi-compound version, will be shown at the REP booth with a molding demonstration of dampers that perfectly illustrates material flow control and automatic demolding capabilities on the press.

Industry 4.0
To meet evolving Industry 4.0 challenges, REP will release a new app and software package called REP Pack 4.0 including Rep Net 4.0 and Rep Net App, the 4th generation of the RepNet supervision software and its mobile app. Comprising 11 modules, REP Pack 4.0 allows for real-time monitoring and plant floor modeling, centralized management of mold settings, productivity calculations, Statistical Process Control and many other functions that will be demo’d at the booth.  

Rubber Micromachine
REP will show a micromolding machine, the rubber version of the Microject M06R. This “Plug & Produce” micromachine is designed for molding and overmolding small parts. It can be easily integrated to automated assembly lines and suits all prototyping or lab testing. Perfectly adapted to very small precision parts, or small series, a version for plastic molding (M06P) or LSR molding (M06S) is also available. It will be presented in action at the booth with a molding demonstration of valves with metal inserts.

Laser Mold Cleaning Machine
The company continues broadening its product range: always focusing on useful solutions for their customers.  REP has developed, together with a laser-specialized partner, a laser technology matched to the cleaning of industrial parts and injection and compression molds for the rubber and polymer processing markets. The machine called “REP MLC 500 by Laselec” is now on available through the global REP distribution network. It will be presented in Düsseldorf.

This environmentally-friendly ecological solution guarantees a safe, optimal, quick and reproducible cleaning with low operating costs.

TYC Compression Press
REP will also show a compression press for molding rubber or composites by Tung Yu, their long-time Asian partner. Offering vacuum compression molding, hot-cold presses, sandwich molding, presses to mold friction parts, presses in clean rooms, SMC, BMC, etc., Tung Yu has broad and diverse experience in the market, which REP can now offer for molding composite, rubber and thermoset materials.

A total of five machines will be shown at the REP booth where an international team will engage visitors from all over the world.

For more information on this announcement, please contact:
REP Corporation, 8N740 Tameling Court, Bartlett, IL 60103-8146. Phone: 847-697-7210. Fax: 847-697-6829. Web: www.repinjection.com.  Email: tgraham@repcorp.com. Attention: Tim Graham, President.

Continue reading

Rep Names New National Sales Director

Responding to growth in sales and expanded market opportunities, industry leader in rubber injection presses adds to staff 

Derek Williams National Sales Director REP Corporation

Derek Williams
National Sales Director
REP Corporation

Bartlett, IL – REP Corporation announces the appointment of Derek Williams to the new position of National Sales Director, effective immediately.   This move represents a return of Mr. Williams to the REP team, where he previously served as a Regional Sales Manager.

Commenting on the appointment, REP Corporation President Tim Graham observed,

“We welcome Derek back to REP. He brings us over 20 years in the rubber industry and his market knowledge is backed by very strong technical machine and material processing know-how. His new role at REP will bring us additional strength in project management and best practices. Current and future customers will benefit from Derek’s hands-on experience plus his knowledge of our company’s leading edge press technologies.”

For more information on this announcement, please contact:
REP Corporation, 8N740 Tameling Court, Bartlett, IL 60103-8146. Phone: 847-697-7210. Fax: 847-697-6829. Web: www.repinjection.com.  Email: tgraham@repcorp.com. Attention: Tim Graham, President.

Continue reading

Devulcanization: REP Group Acquires Watson Brown HSM GmbH

Corbas – REP international, leader in the rubber injection molding machine with the head office being located in Lyon-Corbas, France, has just concluded the acquisition of the patented HSM devulcanization technology on an exclusive right basis, as well as the devulcanization center Watson-Brown HSM-Berlin. This center is equipped with an operational devulcanization line and a test laboratory operated by a team of 6 persons.

centreberlin

Bruno Tabar, CEO of the REP group announces that “REP International will carry on with the development of the HSM technology, its implementation in the center of Berlin and promote a sales offer of devulcanization machines and a devulcanization service on the international market with compounders and processors“.

A resolutely promising eco-process 

Watson Brown HSM Berlin becomes so far the 7th subsidiary of the REP group, the 6 others being involved in the sales and after-sales of REP presses throughout the world. This take-over confirms REP’s readiness to extend their offer, as accentuated through their new corporate baseline “Rubber in motion”.  Aiming to work beyond the injection of rubber and devoted to the tradition of innovation at customers’ service, REP has developed a technical and commercial partnership with Watson Brown HSM the purpose of which is to devulcanize rubber production scraps and reintroduce them into the production chain.

After a series of validation tests conducted in REP’s customer plants it was established that the process is technically performing and economically efficient. That’s when REP decided after many years of collaboration to integrate Watson Brown HSM in their group.

But what is the HSM devulcanization process? 

This patented process applies to any kind of uncontaminated rubber production waste. Once the compound is devulcanized, it is reintegrated into the basic compound. This results in significant savings on both compound and waste disposal costs.

Watson Brown has developed a patent for devulcanizing cured rubber. Controlling the strain applied to the compound by the HSM machine causes the rubber to be devulcanized by preserving properties which are very close to the initial compound.

This is a 100% thermo-mechanical process without adding any further substances or chemical agents and is performed at low temperature, in order to prevent the characteristics of the devulcanized rubber from being altered.

From the devulcanization service to the series machine

REP relies on their industrialization capacities, their experience and geographical international presence to develop the commercialization of HSM machines.  The HSM structure and its components being very close to those of a press, REP has the capacities to industrialize and manufacture these machines.

With the acquisition of the intellectual property and the plant of Watson Brown in Berlin, REP is developing a devulcanization machine offer intended for compounders and rubber processors in addition to the existing devulcanization service.

HSM

What do the activities of Berlin’s center consist in?

Berlin’s devulcanization center is equipped with a laboratory to run tests on samples intended for customers who are willing to test the process based on their own compound, so as to validate the properties before running industrial HSM tests. The existing capacities grant the center the ability to service all customers who want to devulcanize and reintegrate their scraps back into production, in order to substitute them for one part of the basic compound, resulting in a drop in operating cost.

For companies interested in implementing the tests, a few kilograms of scraps will be sufficient to conduct the lab tests resulting in data on the elongation, tensile strength and rheology of the samples. After the test, the customer receives back the processed compound for assessment. It is then possible to conduct production tests to test the final parts on an industrial scale.

logo_k2013_14_B57_e_low_resTaking the green path towards responsible production; making upgraded scraps become raw material!

Rendezvous at the K2013, Hall 14, Booth B57, October 16-23!

For more information on this announcement, please contact:

REP Corporation
8N740 Tameling Court
Bartlett, IL 60103-8146
Phone:  847-697-7210
Fax:  847-697-6829
Web:  www.repinjection.com
Email:  tgraham@repcorp.com
Attention:  Tim Graham, President

Continue reading

Rep Names New Regional Sales Manager

Responding to growth in sales and expanded market opportunities, industry leader in rubber injection presses adds to staff 

John “JR” Mohl REP Corporation

John “JR” Mohl
REP Corporation

Bartlett, IL – REP Corporation announces the appointment of John “JR” Mohl to the position of regional sales manager, effective immediately.  JR will cover select regions of the country, representing the full line of rubber/TPE injection presses and other processing equipment built by REP, the longtime world leader in rubber molding technology.

Commenting on the appointment, REP Corporation President Tim Graham observed, “We have been experiencing considerable growth in our business, with new machine orders from many of our longtime customers and also the acquisition of new customers who’ve come our way as the result of the new equipment offerings in our suite.  We know JR will be a real asset to our efforts in the field.  He also obviously has the right genes for the job,” Graham joked in reference to the new employee’s father, John Mohl, also a REP regional sales manager and an acknowledged expert in rubber molding technology.  John will be speaking at the upcoming International Elastomer Conference in Cleveland on various aspects of the molding and curing process.

A resident of Kalamazoo, Michigan, JR Mohl comes to REP with 15 years experience in various customer service and sales roles.  He holds a degree in Aviation Flight Science from Western Michigan University, where he is currently enrolled in the MBA program.

For more information on this announcement, please contact:
8N740 Tameling Court
Bartlett, IL 60103-8146
Phone:  847-697-7210
Fax:  847-697-6829
Web:  www.repinjection.com
Email:  tgraham@repcorp.com
Attention:  Tim Graham, President

Continue reading

REP CALLS FOR A PITCHOUT! Injection press builder offering molders up to $40,000 credit for scrapping old machines

REP Corporation, the longtime leader in injection presses for rubber and TPE molding, announces the start of a new credit program, effective immediately and running through July 31, 2010.  Molders who validate the scrapping of their older presses can earn up to $40,000 in credit against the purchase of any new REP machine, during this period.  The announcement was made today by REP President Tim Graham, at the company’s Bartlett, Illinois headquarters, near Chicago.

Graham detailed the offer, saying it would apply to any make or model of rubber or TPE injection press.  REP requires the molder to validate the scrapping of their old machine, thereby earning a predetermined credit, based on the old machine’s age and condition.  The credit, up to $40,000, can then be applied to the purchase of any new REP injection press in the G9 series.

He further noted the advantages of a new machine.  “Besides the higher quality parts a molder can produce, owing to the level of mold mechanics, material flow and control sophistication, a new press consumes less energy, has less downtime and less maintenance requirements, so it stays in production.  Even REP presses from our earlier generations cannot match the productivity and resulting profitability of a new G9 machine.  That’s not a brag, it’s a fact and it’s one we can document,” he said, noting the new machines offer better molding strategies, improved ergonomics and faster payback for the customer.

“It’s an offer you can’t refuse,” Graham joked.

REP Corporation is responsible for all sales and service in North America.  However, this offer is being made to rubber molders worldwide by REP, based in Lyon, France.

For more information, please contact: REP CORPORATION 8N470 Tameling Court Bartlett, IL 60103-8146 Phone:  847-697-7210 Fax:  847-697-6829 Web:  www.repinjection.com Email:  tgraham@repcorp.com Attention:  Tim Graham, President

PR agency contact: Tim Daro Bernard & Company 847-934-4500 tdaro@bernardandcompany.com

Continue reading