Tag Archives: no-958

Special Walk-In Oven from Grieve

By Bernard & Company Tags: Grieve, Grieve Corp, Grieve Corporation, Industrial Oven, no-958, success story No Comments

No. 942 is a 350°F (177°C), special walk-in oven from Grieve, currently used for curing epoxy at the customer’s facility. Workspace dimensions of this oven measure 84” W x 144” D x 108” H. 400,000 BTU/hour are installed in a modulating natural gas burner, while a 12,000 CFM total are provided by two (2) 5-HP recirculating blowers providing combination airflow to the workload.

This Grieve oven features 4” insulated walls, aluminized steel interior and exterior and three (3) independent doors for access to workspace on front with standard double doors on rear. Additional features include 2” insulated floor with three (3) pairs of truck wheel guide tracks. The oven is raised above factory floor level on 6” I-beams.

The oven features all safety equipment required by IRI, FM and National Fire Protection Association Standard 86 for gas heated equipment, including a 325 CFM, 1/3-HP powered forced exhauster.

Controls on the No. 942 include a digital programming temperature controller and 10” diameter circular chart recorder.

Grieve 942

For more information, please contact:

THE GRIEVE CORPORATION

500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP

500° Walk-In Oven From Grieve

By Bernard and Company Tags: fluorocarbon shapes, Grieve, Grieve Corp, Grieve Corporation, Industrial Oven, no-958 No Comments

No. 958 is a 500° (260°C), electrically heated walk-in oven from Grieve, currently used for heat treating long fluorocarbon shapes supported by fixtures on wheels at the customer’s facility. Workspace dimensions of this oven measure 36” W x 300” D x 36” H. 60KW are installed in lncoloy sheathed tubular heating elements, while a 4200 CFM, 3-HP recirculating blower provides combination airflow to the workload.

This Grieve walk-in oven has 4” insulated walls and an aluminized steel interior and exterior. Features include an integral top mounted heat chamber, single door front and rear, 2” insulated floor with channel guide tracks and two (2) fixture supports with flanged wheels.

Controls on No. 958 include a digital programming and recording temperature controller, manual reset excess temperature controller with separate contactors plus recirculating blower airflow safety switch and SCR power controller.

Grieve 958