(847) 934-4500

Contact us today:

Tag Archives: Grieve Corp

500° Walk-In Oven From Grieve

No. 958 is a 500° (260°C), electrically heated walk-in oven from Grieve, currently used for heat treating long fluorocarbon shapes supported by fixtures on wheels at the customer’s facility. Workspace dimensions of this oven measure 36” W x 300” D x 36” H. 60KW are installed in lncoloy sheathed tubular heating elements, while a 4200 CFM, 3-HP recirculating blower provides combination airflow to the workload.

This Grieve walk-in oven has 4” insulated walls and an aluminized steel interior and exterior. Features include an integral top mounted heat chamber, single door front and rear, 2” insulated floor with channel guide tracks and two (2) fixture supports with flanged wheels.

Controls on No. 958 include a digital programming and recording temperature controller, manual reset excess temperature controller with separate contactors plus recirculating blower airflow safety switch and SCR power controller.

Grieve 958

For more information, please contact:

THE GRIEVE CORPORATION

500 Hart Road
Round Lake, IL 60073-2898
Phone:  (847) 546-8225
Fax:  (847) 546-9210
Web:  www.grievecorp.com
Email:  sales@grievecorp.com
Attention:  Frank Calabrese, VP

Continue reading

500°F Truck Oven

No. 899 is a 500°F (260°C), high temperature truck oven from Grieve, currently used for curing a coating on parts hanging from rods at the customer’s facility. Workspace dimensions of this oven measure 48” W x 36” D x 96” H.  24 kW are installed in Nichrome wire heating elements, while a 1000 CFM, 1-HP recirculating blower provides vertical upward airflow to the workload.

This Grieve truck oven is sectioned to fit in a 5’ W x 8’ D x 6’8” elevator. It has 4” insulated walls, aluminized steel exterior and Type 304 2B finish stainless steel interior.

Controls on the No. 899 include a 10” circular chart recorder,  manual reset excess temperature controller with separate contactors, digital indicating temperature controller and a recirculating blower airflow safety switch.

For more information, please contact:

THE GRIEVE CORPORATION

500 Hart Road
Round Lake, IL 60073-2898
Phone:  (847) 546-8225
Fax:  (847) 546-9210
Web:  www.grievecorp.com
Email:  sales@grievecorp.com
Attention:  Frank Calabrese, VP

Continue reading

300°F Vertical Conveyor Oven

Grieve_957No. 957 is a 300ºF, electrically-heated vertical conveyor oven from Grieve, currently used for curing potting compounds at the customer’s facility.  Workspace dimensions of this oven measure 36” W x 38” D x 92” H.  20 KW installed in Incoloy-sheathed tubular elements heat the oven chamber, while a 4200 CFM, 3-HP recirculating blower provides vertical upward airflow to the workload.

This Grieve vertical conveyor oven features 4” insulated walls, top-mounted heating chamber, aluminized steel interior and exterior, air-operated lift door at the loading/unloading position, two access doors for the heating chamber and floor of the workspace plus eleven workload trays, each 30” wide by 14” long, supported on each side by heavy-duty roller chain driven by a ½-HP motor controlled by a variable frequency drive.

The oven is built to JIC/NEMA 12 electrical standards. Controls on No. 957 include a digital indicating temperature controller, manual reset excess temperature controller with separate contactors, recirculating blower airflow safety switch and a tower light to indicate oven status.

For more information, please contact:

THE GRIEVE CORPORATION

500 Hart Road
Round Lake, IL 60073-2898
Phone:  (847) 546-8225
Fax:  (847) 546-9210
Web:  www.grievecorp.com
Email:  sales@grievecorp.com
Attention:  Frank Calabrese, VP

Continue reading

500°F Electric Universal Oven from Grieve

891 GrieveNo. 891 is a specially modified 500°F electric universal oven from Grieve, currently used for heating tool cassettes at a customer’s facility.  Workspace dimensions of this unit measure 24”W x 60”D x 24”H.

6.6 kW installed in Nichrome wire heating elements provide the heat, while a 600 CFM, 1/3-HP recirculating blower furnishes a universal pattern airflow to the workload.

This oven features an aluminized steel exterior, Type 430 stainless steel interior and 4” thick insulated walls, plus a silicone rubber door gasket and explosion-venting latches.  A 500 lb. capacity subway grating shelf and seven angle iron shelf supports are included.

No. 891 has a digital indicating temperature controller to display actual and set point readings.

For more information, please contact:

THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL  60073-2898
Phone:  (847) 546-8225
Fax:  (847) 546-9210
Web:  www.grievecorp.com
Email:  sales@grievecorp.com
Attention:  Frank Calabrese, VP

Continue reading

1200ºF Electric Walk-in Oven from Grieve

835 GrieveNo. 835 is a 1200ºF electrically-heated walk-in oven from Grieve, currently used for heat treating steel parts at a customer’s facility.

Workspace inside this oven measures 48” wide x 72” deep x 72” high and a maximum temperature of 1200ºF is provided by 120KW power, installed in Incoloy-sheathed tubular heating elements.  A 10,000 CFM, 7 ½-HP recirculating blower provides combination vertical/horizontal airflow to the load.

No. 835 features an aluminized steel exterior, 16 ga. stainless steel interior and 10” thick insulated walls, comprising 2” of 1900ºF block and 8” of 10 lb. density rockwool insulation, as well as a 7” insulated floor with integral truck wheel guide tracks.

Safety and control equipment on this Grieve oven includes a 325 CFM powered forced exhauster, digital indicating temperature controller, manual reset excess temperature controller with separate contactors, recirculating blower airflow safety switch, and a 4-pen circular chart recorder.

For more information, please contact:

THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL  60073-2898
Phone:  (847) 546-8225
Fax:  (847) 546-9210
Web:  www.grievecorp.com
Email:  sales@grievecorp.com
Attention:  Frank Calabrese, VP

Continue reading