Contact us today:
Contact us today:
(847) 934-4500
tdaro@bernardandcompany.com
No. 828 is a 500°F (260°C), cabinet oven from Grieve, currently used to finish batch loads of metal parts at the customer’s facility. Workspace dimensions of this oven measure 26” W x 26” D x 38” H. 6.6 KW are installed in Nichrome wire heating elements, while a 700 CFM, 1/2-HP recirculating blower provides vertical upward airflow to the workload.
This Grieve cabinet oven has 4” insulated walls, an aluminized steel exterior and Type 430 stainless steel interior.
Controls on the No. 828 include a digital indicating temperature controller, manual reset excess temperature with separate contactors and a recirculating blower airflow safety switch.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, Illinois 60073-2835
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese
No. 934 is an 850°F (454°C), cabinet oven from Grieve, currently used for heat treating at the customer’s facility. Workspace dimensions of this oven measure 38” W x 20” D x 26” H. 10 KW are installed in Incoloy sheathed tubular heating elements, while a 600 CFM, 1/2-HP recirculating blower provides horizontal airflow to the workload.
This Grieve cabinet oven has 6” insulated walls, an aluminized steel exterior and Type 430 stainless steel interior.
Controls on the No. 934 include a digital indicating temperature controller, 10” diameter circular chart recorder and SCR power controller.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, Illinois 60073-2835
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese
No. 1046 is a 750°F (399°C), gas-fired cabinet oven from Grieve, currently used for baking radiator cores at the customer’s facility. Workspace dimensions of this oven measure 80” W x 88” D x 18” H. 800,000 BTU/HR are installed in a modulating natural gas burner, while a 12,500 CFM, 10 HP recirculating blower provides vertical upward airflow to the workload.
This Grieve cabinet oven has a 76” wide x 76” long, 750 lb. capacity pneumatic operated rollout shelf with an insulated plug to seal doorway opening. Features include 8” insulated walls, top-mounted heat chamber and 16-gauge, Type 316, 2B finish stainless steel interior with continuously welded seams.
Additional features include a 16-gauge, 304 stainless steel oven front with a pneumatically operated vertical lift door, an exhaust hood incorporated into the vertical lift door guard and a 1500 CFM powered forced exhauster with motorized damper to increase exhaust as the door is opened. The oven is equipped with safety equipment required by IRI, FM and National Fire Protection Association Standard 86 for operation with flammable solvents.
Controls on the No. 1046 include a digital programming temperature controller, manual reset excess temperature controller with separate contactors and a recirculating blower airflow safety switch.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, Illinois 60073-2835
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese.
No. 892 is a 500°F (260°C), electrically heated belt conveyor oven from Grieve, currently used for curing sealant on filters at the customer’s facility. Workspace dimensions of this oven measure 18” W x 32” D x 26” H. 36 KW are installed in Nichrome wire heating elements, while a 1500 CFM, 11/2-HP recirculating blower provides vertical downward airflow to the workload.
This Grieve belt conveyor oven has an 18” long open belt loading zone and a 24” long open unloading zone. Features include a 12” long insulated, unheated entrance vestibule, 32” long insulated heat zone with recirculated airflow and 12” long insulated, unheated exit vestibule. Additional features include 12” wide, 1” x 1” stainless steel flat wire conveyor belt with 1/4-HP motor drive, variable from 0.6 to 11.7 inches per minute, 4” insulated walls and aluminized steel interior and exterior. The oven also has an integral leg stand with casters.
Controls on the No. 892 include a digital indicating temperature controller, 10” diameter circular chart recorder and SCR power controller.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, Illinois 60073-2835
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese.
No. 994 is a 500°F (260°C) special cabinet oven from Grieve, currently used for heating the end of long parts at the customer’s facility. Workspace dimensions of this oven are a tapered 10” at front and 20” at rear wide x 20” deep x 21” high. 9KW are installed in Nichrome wire heating elements, while a 600 CFM, ½-HP recirculating blower provides vertical upward airflow to the workload.
This Grieve cabinet oven has 4” insulated walls and an aluminized steel interior and exterior. Features also include safety equipment for handling flammable solvents, including explosion venting door hardware.
Controls on No. 994 include all applicable NEMA 12 electrical standards and a tower light to indicate machine status.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, Illinois 60073-2835
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese.
No. 975 is a 1250ºF (676ºC), electrically-heated cabinet oven from Grieve, currently used for heating metal parts to remove deposits at the customer’s facility. Workspace dimensions of this oven measure 50” W x 50” D x 50” H. 160 kW are installed in Incoloy-sheathed tubular elements to heat the oven chamber, while a 6000 CFM, 5 HP recirculating blower provides horizontal airflow to the workload.
This Grieve cabinet oven features 10” insulated walls comprising 2” of 1900ºF block insulation and 8” of 10 lb/cf density rockwool insulation, top-mounted heating chamber, aluminized steel exterior, Type 304, 2B stainless steel interior and all safety equipment required for handling flammable solvents, including explosion-venting door hardware. The insulated floor of the oven is reinforced for 1000 lb. loading with a 1/4” thick, Type 304 stainless steel plate.
No. 975 controls include a digital indicating temperature controller and manual reset excess temperature controller with separate contactors.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 814 is a 500ºF (260ºC), electrically-heated cabinet oven from Grieve, currently used for various plastic and metal part heat treating operations at the customer’s facility. Workspace dimensions of this oven measure 22” W x 21” D x 85” H. 18 kW are installed in Nichrome wire tubular elements to heat the oven chamber, while a 750 CFM, 3/4-HP recirculating blower provides a vertical downward airflow to the workload.
This Grieve cabinet oven features 4” insulated walls, aluminized steel exterior and interior, three integral metal shelves, plus all safety equipment required by NFPA Standard 86 for handling flammable solvents, including a powered forced exhauster, airflow safety switch and purge timer.
Other controls on No. 814 include a fused disconnect switch, digital temperature controller and manual reset excess temperature controller.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 1011 is a 500ºF four-door cabinet oven from Grieve, currently used for stress relieving stainless steel parts at the customer’s facility. Workspace dimensions of this oven measure 20” W x 28” D x 36” H in each of four compartments in the oven. 30 KW are installed in Incoloy-sheathed tubular elements to heat the oven chamber, while a 6000 CFM, 5 HP recirculating blower provides independent horizontal airflow to the workload in each compartment.
This Grieve cabinet oven features 4” thick insulated walls, aluminized steel exterior, Type 304, 2B stainless steel interior, shelf truck with shelf supports on 4” centers, stainless steel loading trays with integral holes to hold the customer’s parts in place, plus a transfer dolly with an oven-to-dolly latch to hold the trays for loading onto the supported shelves in the four oven chambers.
Controls onboard No. 1011 include a digital indicating temperature controller, manual reset excess temperature controller with separate contactors and a recirculating blower airflow safety switch.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP
No. 858 is an 850ºF (454ºC) electrically-heated cabinet oven from Grieve, currently used for annealing plastics at the customer’s facility. Workspace dimensions of this oven measure 20” W x 20” D x 20” H. 10KW are installed in Incoloy-sheathed tubular elements to heat the oven chamber, while a 600 CFM, 1/2-HP recirculating blower provides horizontal airflow to the workload.
This Grieve cabinet oven features 6” insulated walls and Type 430 stainless steel interior, all-welded construction plus explosion-venting latches on the heavy-duty door.
Controls on No. 858 include a digital programming and recording temperature controller, manual reset excess temperature controller with separate contactors and recirculating blower air flow safety switch.
For more information, please contact:
THE GRIEVE CORPORATION, 500 Hart
Road, Round Lake, Illinois 60073-2835 USA. Phone: (847) 546-8225. Fax: (847) 546-
9210. Web: www.grievecorp.com. Email: sales@grievecorp.com. Attention: Frank
Calabrese.
Continue readingNo. 997 is a 750ºF electrically-heated cabinet oven from Grieve, currently used for heating Teflon billets at the customer’s facility. Workspace dimensions on this oven measure 72” W x 72”D x 72”H. 100KW are installed in Incoloy-sheathed tubular elements to heat the oven chamber, while a 10,000 CFM, 7-1/2 HP recirculating blower provides vertical upward airflow to the workload.
This Grieve cabinet oven features 6” insulated walls, subway grating shelf at the bottom of the oven workspace rated for 2500 lb. loading and four (4) pairs of shelf supports rated at 200 lbs. per shelf.
Controls on No. 997 include a digital programming temperature controller, manual reset excess temperature controller with separate contactors, recirculating blower airflow safety switch and 10” diameter circular chart recorder.
For more information, please contact:
THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL 60073-2898
Phone: (847) 546-8225
Fax: (847) 546-9210
Web: www.grievecorp.com
Email: sales@grievecorp.com
Attention: Frank Calabrese, VP